Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
SAFETY
Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine
COMFORT
Fully adjustable handle accommodates a range of operating positions
PERFORMANCE
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed
Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal.
SAFETY
Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal
SAFETY
This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames.
SAFETY
Loop handle enables precision handling
PERFORMANCE
Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing.
SAFETY
Dual rear vacuum ports
Removable handle and weights for easy transport
COMFORT
Three-part adjustable angle handle
PERFORMANCE
Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
Variable speed control
Flip-style weights for added or decreased head pressure
18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition.
TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
The 300BU is a battery operated Ultra-High Speed (“UHS”) burnisher that rapidly produces high levels of gloss on VCT, polished concrete and other hard floor surfaces. The 300BU features SteadyOne™ pad control technology that dramatically improves the performance and life span of burnishing pads while producing excellent single-pass results. This powerful burnisher is available in 20″, 24″, 27″, 28″, and 30″ models.
The 300BU comes with a dust control filter system for clean, quiet and efficient burnishing. Powered by three 12-volt 228 AH batteries, the 300BU can burnish over 26,000 square feet per hour (2400 square meters) and producing only 67 decibels of soft noise. Clean, safe and effective, the 300BU is a burnisher you can count on to maintain floors at any hour in any facility.
Do you ever get inconsistent results with your battery burnisher? It may be because your burnisher doesn’t have the ability to adjust to changing conditions. The 300BU does. With Steadyone Technology built into every 300BU, the burnishing head automatically adjusts to changing floor conditions and changing pad conditions, producing consistent results every time. Exclusive to the 300BU, this “smart” adjustment produces great results – fast – in just a single pass.
SteadyOne™ uses advanced fluid drive technology to maintain constant pad pressure and produce more consistent results. Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today … and tomorrow.
The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder.
The machine comes equipped with a padholder and is available with an optional solution tank.
For Sale
The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder.
The machine comes equipped with a padholder and is available with an optional solution tank.
For Sale
The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
For Sale
The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
For Sale
The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding,
and coating removal.
RELIABLE PERFORMANCE
• 1.5 HP, 2 speed, high torque motor
• Driver speed 175 or 300 rpm
• Strong triple planetary gearbox
• Rugged, all metal construction
• Non-conductive, commercial grade switch housing
SUPERIOR PRODUCTIVITY
• 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr)
• 2.5 gal. (9,5 liter) no-spill solution tank
• Dust containment port for dry applications
• Splash/dust skirt for wet applications
• HydraShine diamond driver uses a passive planetary system
for a superior polish
The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors.
Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class.
The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces.
Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface.
Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class.
The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.
A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine.
VERSATILE
• Strip, deep scrub, and scrub
• 2.5 gal. (9,5 liter) solution tank
PRODUCTIVE
• 120V 1 HP totally enclosed motor
• 12” x 18” (30,5 cm x 45,8 cm) pad size
• 3,600orbits per minute
• 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
USER FRIENDLY OPERATION
• Adjustable, anti-fatigue soft-touch handle
• Dual lever on/off safety switch for left or right hand operation
• Large, non-marking, transport wheels
For Sale
The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate.
RELIABLE PERFORMANCE
• Powerful 18 HP 603cc propane engine with EPSTM technology
• Counter rotating brushes reduce stripper splash
• Ball throttle with electric clutch ensure smooth start up
DESIGNED FOR SAFETY
• Operator Presence automatic shutoff system
• SAFR Technology keeps emissions low even when air filter is dirty
• Muffler system exceeds EPA and CARB minimum requirements
COST EFFECTIVE
• 5 Times LONGER oil change interval than other machines in its class
• Uses 34% LESS fuel than other machines in its class
• Low profile deck for edge-to-edge operation
• Easy pad changes with Rok-BakTM engineering
• Easy access battery service and oil changes
For Sale
The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate.
RELIABLE PERFORMANCE
• Powerful 18 HP 603cc propane engine with EPSTM technology
• Counter rotating brushes reduce stripper splash
• Ball throttle with electric clutch ensure smooth start up
DESIGNED FOR SAFETY
• Operator Presence automatic shutoff system
• SAFR Technology keeps emissions low even when air filter is dirty
• Muffler system exceeds EPA and CARB minimum requirements
COST EFFECTIVE
• 5 Times LONGER oil change interval than other machines in its class
• Uses 34% LESS fuel than other machines in its class
• Low profile deck for edge-to-edge operation
• Easy pad changes with Rok-BakTM engineering
• Easy access battery service and oil changes
The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life
The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place.
Collects ferrous and metallic debris from floor after blasting
Simple operation
50 year magnet life
The simply operated release mechanism enables easy depositing of debris after collection. The permanent magnet will retain its power for 50 years and requires no maintenance. The height is adjustable to cope with large waste and uneven surfaces. The standard sweepers range in size from 310mm to 915mm wide but alternative towable and forklift mounted models are available.
One-step solution. The Jarvis Series is a complete solution for quick, streak-free cleaning of businesses' entrances, parking lots, tennis courts, pool decks and sidewalks. This easy to use cold water surface cleaner pressure washer is an all-in-one unit with the pump and engine attached to the surface cleaner, and it is designed to attack the superficial dirt sweeping alone does not get. The Jarvis series surface cleaner pressure washer is perfect for all operators - simple on / off operation, flat free tires and a folding handle for easy transport and storage.
21" corrosion-resistant stainless steel surface cleaner housing and
a professional grade swivel design for extended, effortless use
Reliable Honda GX engine with three-year warranty
Flat free tires
Folding handle for easy storage and transport
Simple on / off operation
EASY!Force gun with cruise control like technology - uses its own
recoil force to hold the trigger down - so, no more sore hands
after hours of use
Durable and dependable.
This industrial hand held unit is significantly more rugged than
typical consumer substitutes and are built with durable steel frames.
This hand-held model comes with a dependable crankcase pump, high
pressure hose and a stainless steel wand.
Features
Durable steel frame
Crankcase pump
Portable, easy to transport
Certified to UL safety standard
Cleaning versatility and durability.
Corrosion-resistant and light-weight, Kärcher’s direct drive,
HD Classic aluminum pressure washers can be utilized as a cart or a
skid for maximum cleaning versatility and durability. These reliable
Kärcher powered pressure washers offer a 3-year engine warranty,
bypass loop for additional pump protection, 7-year pump warranty
and flat-free tires.
Features
Reliable Kärcher engine with 3-year warranty
Direct drive models
Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated
Aluminum frame - modular design - converts easily from cart to skid
Cleaning versatility and durability.
Corrosion-resistant and light-weight, Kärcher’s direct drive,
HD Classic aluminum pressure washers can be utilized as a cart or a
skid for maximum cleaning versatility and durability. These reliable
Kärcher powered pressure washers offer a 3-year engine warranty,
bypass loop for additional pump protection, 7-year pump warranty
and flat-free tires.
Features
Reliable Kärcher engine with 3-year warranty
Direct drive models
Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated
Aluminum frame - modular design - converts easily from cart to skid
Cleaning versatility and durability.
Corrosion-resistant and light-weight, Kärcher’s direct drive,
HD Classic aluminum pressure washers can be utilized as a cart or a
skid for maximum cleaning versatility and durability. These reliable
Kärcher powered pressure washers offer a 3-year engine warranty,
bypass loop for additional pump protection, 7-year pump warranty
and flat-free tires.
Features
Reliable Kärcher engine with 3-year warranty
Direct drive models
Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated
Aluminum frame - modular design - converts easily from cart to skid
Easily converts from cart to skid.
Corrosion-resistant and light-weight, Mako Shark Series HD aluminum
pressure washers can be utilized as a cart or a skid for maximum
cleaning versatility and durability. These reliable Honda powered
pressure washers offer a bypass loop for additional pump protection,
7-year pump warranty and flat-free tires.
Features
Reliable Honda GX engine
Belt or direct drive models
Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated.
Weldless, corrosion resistant aluminum frame
Modular design - converts easily from cart to skid
Stainless steel nozzles
U-Seal technology
Compact and dependable.
The DG Shark Series are tough gasoline-powered direct-drive cold
water machines that deliver cleaning power of up to 4000 PSI. Built
on compact sturdy steel frames, each unit features a dependable
industrial-grade Honda engine, crankcase pump, hose/gun rack and
tubed pneumatic tires.
Features
Steel frame with powder coat finish
Honda GX engine
Industrial direct-drive crankcase pump with U-Seal technology
Sanitizing and Disinfecting Floor surfaces is more important than ever.
Make Unlimited Amounts Of Oxidizing Solution
Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand.
Features
• Antimicrobial Tank
• Remote Tank and Spray Wand
• Non Marking Grey Tires
• Onboard ZerO3®
• Urethane Squeegee Blades
• 0.2 Micron Vac Filter
Sanitizing and Disinfecting Floor surfaces is more important than ever.
Make Unlimited Amounts Of Oxidizing Solution
Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand.
Features
• Antimicrobial Tank
• Remote Tank and Spray Wand
• Non Marking Grey Tires
• Onboard ZerO3®
• Urethane Squeegee Blades
• 0.2 Micron Vac Filter
Sanitizing and Disinfecting Floor surfaces is more important than ever.
Make Unlimited Amounts Of Oxidizing Solution
Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand.
Features
• Antimicrobial Tank
• Remote Tank and Spray Wand
• Non Marking Grey Tires
• Onboard ZerO3®
• Urethane Squeegee Blades
• 0.2 Micron Vac Filter
Approach a variety of surfaces with the Cimex Wide Sweeper. This walk-behind machine collects debris in a single, expanded aggressive three-brush formation. Great for larger industrial plants and commercial properties, the Cimex Wide Sweeper will ensure the safety and presentation of your facility. At five times the speed of traditional brooming, hard floors become efficiently cleaner in less time
Sweep up any surface with the Cimex Filtration Sweeper. This walk-behind machine collects debris in a single, efficient sequence of dust-free multi-layer filtering and aggressive three-brush formation. Great for industrial plants and commercial properties, the Cimex Filtration Sweeper will maintain the safety and presentation of your facility. At five times the speed of traditional brooming, hard floors become efficiently cleaner in less time.
Autonomous floor scrubber for medium to large sized environments. Allows staff to focus on other tasks while the Liberty SC50 scrubs for 6 hours on a single charge.
Meet Nilfisk Liberty SC50 autonomous scrubber-dryer. After years of developing, testing, refining, live beta testing and more refining, it’s ready for the biggest and toughest jobs you can throw at it. In airports, schools, gymnasiums, ballrooms and more, Nilfisk Liberty will get the dirtiest floors clean, any time of day, with no one watching over it.
Clean consistently every time. Nilfisk Liberty SC50 is precise, meticulous, and easy to use. It gets into those nooks and crannies you might otherwise miss, and it does it every single time. In fact, operators – and most autonomous cleaning machines – typically miss 15% of a space. But Nilfisk Liberty SC50’s unique technology lets you map out a route that delivers between 98% and 99.5% coverage. You can do it with no help from us or anyone else. And as soon as Nilfisk Liberty SC50 has cleaned an area once, it precisely retraces the same path again, and again, and again.
Clean more, faster. How much more would you get done if no one had to spend time guiding a scrubber-dryer over all that floor space? Nilfisk Liberty SC50 frees up your staff to do those other important jobs that call for a human touch, while it cleans autonomously for up to six hours on a single charge. It also automatically maps out the most efficient cleaning paths and retraces them every time. So you can clean more space in less time at a lower cost every single day. Plus, you’ll get a text when it’s time for Nilfisk Liberty SC50 to move on to the next task, and you won’t have to think about unnecessary down time either.
Nilfisk Liberty SC50 is a fast learner. When it needs to be taught new tricks, you can teach it yourself. You’ll never have to request a service visit just because you find yourself wanting to clean new spaces. Or when circumstances change for any reason – for a while or for good. Just hop on your Nilfisk Liberty SC50, push the button to put it in mapping mode, and you’ll soon be ready to take on something new.
Reliable and Safe: The Liberty SC50 is the only autonomous floor scrubber on the market compliant with CSA/ANSI 336, an OSHA recognized autonomous floorcare safety standard.
Size and Run-Time: The agile design allows the machine to react to changes in the environment and maintain autonomous operation without operator intervention.
Simplicity: We added 3 buttons for autonomy. Record. Play. Stop. This machine is built for a scrubber operator, not a computer programmer.
Fill-in Mode: The operator drives around the site to-be cleaned once, and the SC50 calculates the most efficient path to clean the interior of that space, avoiding obstacles along the way. This revolutionary cleaning method is a Nilfisk exclusive.
The VIPER AS6690T/AS7690T/AS7190TO walk-behind scrubbers prioritize smart performance, simple design, and user-friendly operation for cleaning medium to large sized facilities.
The AS6690T and AS7690T are both equipped with dual-brush decks for fast, effective cleaning, while the AS7190TO uses an orbital scrub deck for intensive multidirectional floorcare.
Each is an ideal solution for facility-managers and contract cleaners who need impressive results in hard-floor areas, whether they’re performing routine cleaning, heavy-duty scrubbing, or floor finish removal (orbital version).
Eco mode greatly extends battery run time for greater productivity.
Silent mode allows for cleaning in noise sensitive areas and is ideal for daytime cleaning.
The VIPER AS6690T/AS7690T/AS7190TO walk-behind scrubbers prioritize smart performance, simple design, and user-friendly operation for cleaning medium to large sized facilities.
The AS6690T and AS7690T are both equipped with dual-brush decks for fast, effective cleaning, while the AS7190TO uses an orbital scrub deck for intensive multidirectional floorcare.
Each is an ideal solution for facility-managers and contract cleaners who need impressive results in hard-floor areas, whether they’re performing routine cleaning, heavy-duty scrubbing, or floor finish removal (orbital version).
Eco mode greatly extends battery run time for greater productivity.
Silent mode allows for cleaning in noise sensitive areas and is ideal for daytime cleaning.
