Browse by Brand Archives

Karcher EB 30/1 Compact Walk Behind Floor Sweeper

Request a Quote

Questions? Call us at (866) 812-6252

This is the first battery-powered electric broom for commercial users. With its roller brush and dirt container, it functions as a broom and dustpan. Can be used on hard floors and carpets. The EB 30/1 has a foot-operated on/off switch. At 90 mm tall, the unit is flat enough to reach beneath radiators and furniture with low ground clearance. It picks up loose dirt within just 2 mm of its edges. The telescopic broomstick has a push handle and can be adjusted to suit the operator’s height, while a universal joint enables it to move in all directions. When not in use, it locks into the vertical position. The electric broom can run for roughly 30 minutes on carpets and 45 minutes on hard floors before the powerful nickel cadmium battery requires recharging. Charging time can be reduced from 12 hours to 50 minutes using the optional fast charger. Batteries can be swapped to permit uninterrupted working. No tools are required to change batteries or remove the roller brush. Any fibers that get wound around the brush can be removed by running a knife along a specially designed groove to sever them.

Karcher BRS 43/500 C Carpet Cleaner

Request a Quote

Questions? Call us at (866) 812-6252

Provides exceptional cleaning results and leaves carpets dry enough to re-entry in only 20 minutes. Using encapsulation technology the machine cleans carpets thoroughly with the minimum of effort and downtime. Kärcher’s interim carpet cleaner BRS 43/500 C provides exceptional cleaning results. Interim cleaning works by spraying the carpet with water and detergent, agitating with counter-rotating brushes and vacuuming 20 minutes later with an upright vacuum cleaner. The carpet is then ready for re-entering. By using Kärcher’s innovative Fast Drying Carpet Cleaner RM 768 detergent, which encapsulates dirt particles to separate them from the carpet fibres, the interim process is highly effective and gives amazing results quickly.

Karcher BDS 43/Duo C Floor Machine

Request a Quote

Questions? Call us at (866) 812-6252

The Kärcher BDS 43/Duo C is an all-surface cleaning, scrubbing, sanding, polishing, extraction and grinding floor machine. The patented dual-action Orb Technology gives the BDS 43/Duo C the versatility to clean multiple floor surfaces. Ideal for hard floor areas up to 7,500 square feet per hour and 3,000 square feet per hour of carpeted surfaces. This is truly an all-surface floor machine. Unlike traditional machines, the Kärcher BDS 43/Duo C generates thousands of 3/8” orbital contacts points that spin at 1725 rpms, while at the same time spinning at 80 RPM. The patented Orb Technology is a superior orbital mechanics system. It allows the machine to be more versatile and work on eight different floor surfaces.

Karcher Radiant Floor Machine

Request a Quote

Questions? Call us at (866) 812-6252

Think outside of the box. Round is the new square. Why? Simply because it performs better, costs less and is easier to use all day. The versatile Radiant features ORB technology and provides true dual-motion orbital mechanics without the operator experiencing harsh vibrations from the machine. Our pad lies flat on the floor resulting in better productivity, more even pad wear, and improved results. • Provides even pad wear resulting in better, faster performance • Integrated solution system allows for improved control and less waste • Low-vibration design allows for hours of fatigue-free usage • Chemical-free floor finish removal • Clean carpet with low-moisture encapsulation • Make tile & grout shine with the nylon scrub brush • Polish stone with our complete restoration kit • Remove finish from wood, VCT and vinyl floors • Clean indoor and outdoor concrete • Deck can be raised to change pads without tipping machine on its back • Large 10-inch wheels make transportation easy • No isolators to wear out or replace • Every point on the pad oscillates at 1725 rpm while the entire pad spins at 80 rpm • True dual-motion orbital mechanics

Karcher Puzzi 30/4 Carpet Extractor

Request a Quote

Questions? Call us at (866) 812-6252

The Puzzi 30/4 spray extraction cleaner is the economical cleaning solution for large carpet surfaces and makes cleaning ergonomic, stress-free and quick. With a noise level of 66 dB(A), the Puzzi 30/4 spray extraction cleaner is the quietest wet vacuum cleaner in its class and ideal for low-noise cleaning. With an 8 gallon fresh water capacity and a 14" floor nozzle, this innovative spray extraction cleaner is especially suitable for cleaning large carpet areas. The machine design focuses on ergonomic, stress-free and time-saving cleaning. The EASY Operation concept and the ergonomic upright stance make handling much easier. The learning curve is short thanks to easily understandable pictograms. The dirty water tank is removable, and the handle and shape of the tank are designed for ergonomic carrying. The tank is easy to clean, which also makes it suitable for filling the fresh water tank. The short setup period saves time and money. The drying time with this machine is up to 30% shorter than with competitive products. This is partiallydue to the flexible suction lip, which always assures an optimal suction angle. The Puzzi 30/4 is easy to carry, even when lying flat with a full fresh water tank, and its large castor wheels make it easy to transport over stairs.

Kodiak K25 Walk Behind Scrubber

Request a Quote

Request Quote for Best Price

(866) 812-6252

Clean for extended hours with the K25 high-performance Battery Floor Scrubber. This floor scrubber is equipped with large tanks for large area cleaning. Take control of your facility cleaning and provide consistent results for years. The K25 is designed around a steel frame to ensure durability while being budget friendly. The scrub brushes are installed and removed without tools to allow ease when switching between application’s needs. Premium performance with your budget in mind.

Kodiak K16 Walk Behind Scrubber

Request a Quote

Request Quote for Best Price

(866) 812-6252

Reduce the cost to clean with the K16 Floor Scrubber. We’ve made consistent cleaning and being budget conscious our top priorities while delivering a durable floor scrubber that will last for years. Maintain cleanliness in Warehouses, Fitness Facilities, Fabrication Shops, and other applications. The scrub brushes are installed and removed without tools to allow ease when switching between application’s needs. The squeegee blades can be rotated or flipped without tools. Ensure complete cleaning in a variety of sized applications with a reliable scrubber.

Kodiak K12 Standard Walk Behind Scrubber

Request a Quote

Request Quote for Best Price

(866) 812-6252

Cleaning small areas with a budget in mind has just gotten easier with the K12 Series of Floor Scrubbers. Don’t let the size fool you, this floor scrubber provides premium performance and durability compared to others in the market. Maintain cleanliness in Auto Shops, Sports Arenas, and Small Warehouses easily. The squeegee blades and brushes can be rotated or flipped without tools to allow maximum usage prior to replacement and to aid in easy changes.

Husqvarna BMS-280P Floor Scraper

$47,609.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Husqvarna BMS-220P ride-on scraper is ideally suited for medium and large sized applications. Works well on all applications such as hardwood parquet, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles, etc. The BMS-280P is one of the quickest, most agile and highly productive ride-on floor scrapers designed for large area surface removal. The BMS-280P significantly reduces the amount of time and effort required to remove a wide variety of thick coatings, floor coverings and waterproofing membranes. Everything from carpet and tough ceramic tile to hardwood and VCT are no match for this machine

Clarke FM40 LX Floor Machine

$5,306.00

Questions? Call us at (866) 812-6252

Powerful performance. Versatile application. Continuing the legacy of their extremely popular predecessor, the Clarke® BOS-18, Clarke® FM40™ ST & LX Floor Machines are a significant step forward for Clarke orbital scrubbing floor technology. Available in a standard ST version and a feature-rich LX edition, Clarke FM40 floor machines are engineered to give you the ultimate combination of ease of use and versatility. The result is unmatched performance in both wet and dry applications. Don’t let their compact size fool you: Clarke FM40 ST & LX Floor Machines have full 1.5 hp motors, 160 pounds of down pressure and 3,540 rpm pad drivers. That means cleaner floors with fewer passes and less strain on your operators. Do more, work less Featuring standardized 14-inch x 20-inch pad decks, versatile Clarke FM40 ST & LX Floor Machines are ideal replacements for a variety of other equipment, too. In addition to scrubbing small, hard-to-reach areas where large floor scrubbers are simply ineffective, Clarke FM40s also supplement Clarke scrubbers with BOOST® Technology to remove floor finish without chemicals. With the right pads, you can even use Clarke FM40s to clean grout in bathrooms, prep or recoat gym floors, bonnet clean carpet, and burnish terrazzo, marble and concrete. Clean baseboards, too Now you can clean baseboards without having to purchase a separate machine or, worse, getting down on your hands and knees to scrub. Clarke FM40 ST & LX floor machines come standard with an innovative baseboard cleaner that attaches to the front of the machine to provide a fast, convenient solution for those hard-to-clean baseboards.

1.5 hp motor, 3,540-rpm deck and 20 x 14 inch cleaning path quickly buff wide areas
Three, 21-lb weights maximize down pressure and cleaning effectiveness
Quiet, low-vibration design (68 dB A) allows cleaning in noise-sensitive environments
Baseboard attachment eliminates hand cleaning baseboards
Wheels-up or wheels-down operating modes allow quick switching from traditional floor machine mode to back-and-forth burnisher mode (LX only)
Disassembles without tools to make transport between job sites easy and fast (LX only)

Clarke FM40 ST Floor Machine

$5,002.00

Questions? Call us at (866) 812-6252

1.5 hp motor, 3,540-rpm deck and 20 x 14 inch cleaning path quickly buff wide areas
Three, 21-lb weights maximize down pressure and cleaning effectiveness
Quiet, low-vibration design (68 dB A) allows cleaning in noise-sensitive environments
Baseboard attachment eliminates hand cleaning baseboards
Wheels-up or wheels-down operating modes allow quick switching from traditional floor machine mode to back-and-forth burnisher mode (LX only)
Disassembles without tools to make transport between job sites easy and fast (LX only)

Clarke CFP PRO 20DS Floor Machine

$2,024.00

Questions? Call us at (866) 812-6252

Dual speeds, one result: beautiful, high gloss floors, fast Your floors say a lot about the quality of your organization. The Clarke® CFP Pro® 20DS Floor Machine helps ensure years of beautiful, high gloss finishes that are sure to be noticed. Simple. Rugged. Versatile. Featuring rugged, all-metal construction and a high-powered 1.5 hp motor with Dual-Speed rotating action, the Clarke CFP Pro 20DS Floor Machine delivers heavy-duty performance in a wide range of flooring environments. Fingertip controls, handle-mounted lockout switch and safety-yellow cord with convenient cord wrap help maximize safety, simplify use and expedite storage.

Two buffing speeds improve floor care productivity
All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
1.5 hp motor provides plenty of power
Easy-to-use fingertip controls and universal clutch plate make operation simple
Handle-mounted, safety lockout switch improves safety
50-foot safety-yellow power cord extends range, then stores easily on convenient cord wrap

Clarke CFP PRO 17HD Floor Machine

$1,202.00

Questions? Call us at (866) 812-6252

Tough, well-built buffers Keeping your floors buffed, polished and looking their best is an important, never-ending task that requires tough, long-lasting machines. Clarke® CFP Pro® 17HD and 20HD Floor Machines are built Clarke Tough for years of beautiful, high-gloss floors Simple. Rugged. Affordable. Clarke CFP Pro 17HD & 20HD Floor Machines are all-metal constructed machines that are easy to use, with foot-activated handle locks, fingertip controls, powerful motors and long cords. Safety features like handle-mounted lockout switches help keep operation safe. And powerful motors get the job done fast.

All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
1.5 hp motor provides plenty of power
Easy-to-use fingertip controls and universal clutch plate make operation simple
Handle-mounted, safety lockout switch improves safety
50-foot safety-yellow power cord extends range, then stores easily on convenient cord wrap

Viper Venom VN1715 Floor Machine

$1,013.00

Questions? Call us at (866) 812-6252

VENOM VN1715 & VN2015 17 or 20 inch, 175 rpm floor machines Benefits of VENOM VN1715 & VN2015 floor machines

17 and 20 inch cleaning paths
175 rpm
1.5 hp, 66-frame motor
All-steel triple-planetary gear box
All-metal construction
50 foot safety yellow power cord
CSA approved
Optional 2.5 gallon solution tank
Optional 13 and 15 inch deck kits
3-year parts and 2-year labor warranty

Viper AS850R Rider Scrubber

$13,920.00 – $14,575.00

Questions? Call us at (866) 812-6252

The perfect ride-on solution for scrubbing and drying Ideally suited for daily indoor cleaning in mid-sized areas of railway stations, parking areas, shopping malls, exhibition centers, schools, hotels, public institutions and other commercial environments larger than 50,000sqft

28 and 32 inch cleaning path
31 US gallon solution and recovery tanks
77 and 80 pounds of down pressure
One-touch scrubbing
Four solution flow rates
Easy recovery tank clean-out
Integrated squeegee hanging system
Side pocket for easy storage of paperwork
USB port for charging portable electronics
5-year parts and 2-year labor warranty

Viper AS7690T 30″ Walk Behind Scrubber

$7,844.00 – $10,564.00

Questions? Call us at (866) 812-6252

The VIPER AS6690T/AS7690T/AS7190TO walk-behind scrubbers prioritize smart performance, simple design, and user-friendly operation for cleaning medium to large sized facilities. The AS6690T and AS7690T are both equipped with dual-brush decks for fast, effective cleaning, while the AS7190TO uses an orbital scrub deck for intensive multidirectional floorcare. Each is an ideal solution for facility-managers and contract cleaners who need impressive results in hard-floor areas, whether they’re performing routine cleaning, heavy-duty scrubbing, or floor finish removal (orbital version).

Eco mode greatly extends battery run time for greater productivity.
Silent mode allows for cleaning in noise sensitive areas and is ideal for daytime cleaning.
Finish removal mode icon enables chemical-free floor finish removal (AS7190TO only).
Traction drive for increased productivity while reducing operator fatigue.
Designed for quick and convenient tools free daily maintenance requirements.

Viper AS7190TO 28″ Walk Behind Scrubber

$11,174.00 – $13,036.00

Questions? Call us at (866) 812-6252

Eco mode greatly extends battery run time for greater productivity.
Silent mode allows for cleaning in noise sensitive areas and is ideal for daytime cleaning.
Finish removal mode icon enables chemical-free floor finish removal (AS7190TO only).
Traction drive for increased productivity while reducing operator fatigue.
Designed for quick and convenient tools free daily maintenance requirements.

Advance Liberty SC50 Autonomous Floor Scrubber

Request a Quote
Questions? Call us at (866) 812-6252

Autonomous floor scrubber for medium to large sized environments. Allows staff to focus on other tasks while the Liberty SC50 scrubs for 6 hours on a single charge. Meet Nilfisk Liberty SC50 autonomous scrubber-dryer. After years of developing, testing, refining, live beta testing and more refining, it’s ready for the biggest and toughest jobs you can throw at it. In airports, schools, gymnasiums, ballrooms and more, Nilfisk Liberty will get the dirtiest floors clean, any time of day, with no one watching over it. Clean consistently every time. Nilfisk Liberty SC50 is precise, meticulous, and easy to use. It gets into those nooks and crannies you might otherwise miss, and it does it every single time. In fact, operators – and most autonomous cleaning machines – typically miss 15% of a space. But Nilfisk Liberty SC50’s unique technology lets you map out a route that delivers between 98% and 99.5% coverage. You can do it with no help from us or anyone else. And as soon as Nilfisk Liberty SC50 has cleaned an area once, it precisely retraces the same path again, and again, and again. Clean more, faster. How much more would you get done if no one had to spend time guiding a scrubber-dryer over all that floor space? Nilfisk Liberty SC50 frees up your staff to do those other important jobs that call for a human touch, while it cleans autonomously for up to six hours on a single charge. It also automatically maps out the most efficient cleaning paths and retraces them every time. So you can clean more space in less time at a lower cost every single day. Plus, you’ll get a text when it’s time for Nilfisk Liberty SC50 to move on to the next task, and you won’t have to think about unnecessary down time either. Nilfisk Liberty SC50 is a fast learner. When it needs to be taught new tricks, you can teach it yourself. You’ll never have to request a service visit just because you find yourself wanting to clean new spaces. Or when circumstances change for any reason – for a while or for good. Just hop on your Nilfisk Liberty SC50, push the button to put it in mapping mode, and you’ll soon be ready to take on something new.

Reliable and Safe: The Liberty SC50 is the only autonomous floor scrubber on the market compliant with CSA/ANSI 336, an OSHA recognized autonomous floorcare safety standard.

Size and Run-Time: The agile design allows the machine to react to changes in the environment and maintain autonomous operation without operator intervention.

Simplicity: We added 3 buttons for autonomy. Record. Play. Stop. This machine is built for a scrubber operator, not a computer programmer.

Fill-in Mode: The operator drives around the site to-be cleaned once, and the SC50 calculates the most efficient path to clean the interior of that space, avoiding obstacles along the way. This revolutionary cleaning method is a Nilfisk exclusive.

Factory Cat Sanitation 30 Walk Behind Scrubber

Questions? Call us at (866) 812-6252

Sanitizing and Disinfecting Floor surfaces is more important than ever.

Make Unlimited Amounts Of Oxidizing Solution Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand. Features • Antimicrobial Tank • Remote Tank and Spray Wand • Non Marking Grey Tires • Onboard ZerO3® • Urethane Squeegee Blades • 0.2 Micron Vac Filter

Factory Cat Sanitation 13 Walk Behind Scrubber

Questions? Call us at (866) 812-6252

Sanitizing and Disinfecting Floor surfaces is more important than ever.

Factory Cat Sanitation 21 Walk Behind Scrubber

Questions? Call us at (866) 812-6252

Sanitizing and Disinfecting Floor surfaces is more important than ever.

Karcher DG-354037 Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

Compact and dependable. The DG Shark Series are tough gasoline-powered direct-drive cold water machines that deliver cleaning power of up to 4000 PSI. Built on compact sturdy steel frames, each unit features a dependable industrial-grade Honda engine, crankcase pump, hose/gun rack and tubed pneumatic tires. Features Steel frame with powder coat finish Honda GX engine Industrial direct-drive crankcase pump with U-Seal technology

Karcher HD 4.0/40 GeB Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

Easily converts from cart to skid. Corrosion-resistant and light-weight, Mako Shark Series HD aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Honda powered pressure washers offer a bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Honda GX engine Belt or direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated. Weldless, corrosion resistant aluminum frame Modular design - converts easily from cart to skid Stainless steel nozzles U-Seal technology

Karcher HD 4.0/40 Ge Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

Cleaning versatility and durability. Corrosion-resistant and light-weight, Kärcher’s direct drive, HD Classic aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Kärcher powered pressure washers offer a 3-year engine warranty, bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Kärcher engine with 3-year warranty Direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated Aluminum frame - modular design - converts easily from cart to skid

Karcher HD 4.0/40 G Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

Karcher HD 3.0/27 G Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

Karcher CD-232437 Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

Durable and dependable. This industrial hand held unit is significantly more rugged than typical consumer substitutes and are built with durable steel frames. This hand-held model comes with a dependable crankcase pump, high pressure hose and a stainless steel wand. Features Durable steel frame Crankcase pump Portable, easy to transport Certified to UL safety standard

Karcher Jarvis SCW 2.4/25G Cold Water Pressure Washer

Request a Quote

Questions? Call us at (866) 812-6252

One-step solution. The Jarvis Series is a complete solution for quick, streak-free cleaning of businesses' entrances, parking lots, tennis courts, pool decks and sidewalks. This easy to use cold water surface cleaner pressure washer is an all-in-one unit with the pump and engine attached to the surface cleaner, and it is designed to attack the superficial dirt sweeping alone does not get. The Jarvis series surface cleaner pressure washer is perfect for all operators - simple on / off operation, flat free tires and a folding handle for easy transport and storage. 21" corrosion-resistant stainless steel surface cleaner housing and a professional grade swivel design for extended, effortless use Reliable Honda GX engine with three-year warranty Flat free tires Folding handle for easy storage and transport Simple on / off operation EASY!Force gun with cruise control like technology - uses its own recoil force to hold the trigger down - so, no more sore hands after hours of use

SPE RMS Magnetic Floor Sweeper

Request a Quote

Questions? Call us at (866) 812-6252

The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place.

Collects ferrous and metallic debris from floor after blasting
Simple operation
50 year magnet life

The simply operated release mechanism enables easy depositing of debris after collection. The permanent magnet will retain its power for 50 years and requires no maintenance. The height is adjustable to cope with large waste and uneven surfaces. The standard sweepers range in size from 310mm to 915mm wide but alternative towable and forklift mounted models are available.

SPE 20DC Dust Collector

Request a Quote

Questions? Call us at (866) 812-6252

SPE 20DC Dust Collector

Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.

SPE 16DC Dust Collector

Request a Quote

Questions? Call us at (866) 812-6252

SPE 16DC Dust Collector

Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.

SPE 12DC Dust Collector

Request a Quote

Questions? Call us at (866) 812-6252

SPE 12DC Dust Collector

Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.

SPE DFG 500 Floor Grinder (Demo Unit)

Request a Quote

Questions? Call us at (866) 812-6252

SPE DFG 500 Floor Grinder

Very little usage on these demo units. Regular price is $14,000. 2 units available. Free shipping to a commercial loading dock.

SPE BEF 275 Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

SPE BEF 275 Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

SPE BEF200N-2A Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

SPE BEF200N-4A Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

Pioneer Eclipse 38 inch 440ST Floor Stripper for sale

Pioneer Eclipse 38″ 440ST Floor Stripper

Request a Quote

Questions? Call us at (866) 812-6252

For Sale The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate. RELIABLE PERFORMANCE • Powerful 18 HP 603cc propane engine with EPSTM technology • Counter rotating brushes reduce stripper splash • Ball throttle with electric clutch ensure smooth start up DESIGNED FOR SAFETY • Operator Presence automatic shutoff system • SAFR Technology keeps emissions low even when air filter is dirty • Muffler system exceeds EPA and CARB minimum requirements COST EFFECTIVE • 5 Times LONGER oil change interval than other machines in its class • Uses 34% LESS fuel than other machines in its class • Low profile deck for edge-to-edge operation • Easy pad changes with Rok-BakTM engineering • Easy access battery service and oil changes

Pioneer Eclipse 30″ 440ST Floor Stripper

Request a Quote

Questions? Call us at (866) 812-6252

Pioneer Eclipse 250ST Floor Stripper

Request a Quote

Questions? Call us at (866) 812-6252

A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine. VERSATILE • Strip, deep scrub, and scrub • 2.5 gal. (9,5 liter) solution tank PRODUCTIVE • 120V 1 HP totally enclosed motor • 12” x 18” (30,5 cm x 45,8 cm) pad size • 3,600orbits per minute • 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug USER FRIENDLY OPERATION • Adjustable, anti-fatigue soft-touch handle • Dual lever on/off safety switch for left or right hand operation • Large, non-marking, transport wheels

Pioneer Eclipse 450GP Concrete Grinder & Polisher

Request a Quote

Questions? Call us at (866) 812-6252

The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces. Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface. Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class. The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.

Pioneer Eclipse 420GPHD Concrete Polisher

Request a Quote

Questions? Call us at (866) 812-6252

The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors. Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class. The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter

Pioneer Eclipse 17″ 225GP Hard Floor Machine

Request a Quote

Questions? Call us at (866) 812-6252

For Sale The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding, and coating removal. RELIABLE PERFORMANCE • 1.5 HP, 2 speed, high torque motor • Driver speed 175 or 300 rpm • Strong triple planetary gearbox • Rugged, all metal construction • Non-conductive, commercial grade switch housing SUPERIOR PRODUCTIVITY • 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr) • 2.5 gal. (9,5 liter) no-spill solution tank • Dust containment port for dry applications • Splash/dust skirt for wet applications • HydraShine diamond driver uses a passive planetary system for a superior polish

Pioneer Eclipse 17 inch FM Floor Maintainer for sale

Pioneer Eclipse 17″ FM Floor Maintainer

Request a Quote

Questions? Call us at (866) 812-6252

For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.

Pioneer Eclipse 20 inch FM Floor Maintainer for sale

Pioneer Eclipse 20″ FM Floor Maintainer

Request a Quote

Questions? Call us at (866) 812-6252

For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.

Pioneer Eclipse 20 inch 225FP Floor Machine for sale

Pioneer Eclipse 20″ 225FP Floor Machine

Request a Quote

Questions? Call us at (866) 812-6252

For Sale The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder. The machine comes equipped with a padholder and is available with an optional solution tank.

Pioneer Eclipse 28″ 440BU Burnisher

Request a Quote

Questions? Call us at (866) 812-6252

For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.

Pioneer Eclipse 24″ 440BU Burnisher

Request a Quote

Questions? Call us at (866) 812-6252

Pioneer Eclipse 21″ 440BU Burnisher

Request a Quote

Questions? Call us at (866) 812-6252

Pioneer Eclipse 40 inch 420BU Burnisher for sale

Pioneer Eclipse 40″ 420BU Burnisher

Request a Quote

Questions? Call us at (866) 812-6252

For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.

Sanitizing and Disinfecting Floor surfaces is more important than ever.

Sanitizing and Disinfecting Floor surfaces is more important than ever.

Sanitizing and Disinfecting Floor surfaces is more important than ever.

SPE 20DC Dust Collector

SPE 16DC Dust Collector

SPE 12DC Dust Collector

SPE DFG 500 Floor Grinder

Planing / Scarifying made easy...

Planing / Scarifying made easy...

Title