Shop | Jordan Power

Cimex CR48DF Diamond Finisher

$5,325.00

Questions? Call us at (866) 812-6252

First-Class Floor Polishing.

The Cimex Diamond Finisher allows for successive stages of floor preparation on concrete, marble, granite, terrazzo and stone floors to be completed more rapidly and with less effort than is possible by conventional methods. The three-headed, counter rotating system of our Cimex Diamond Finisher works in tandem with a selection of diamond faced finishing discs. These discs are graded from coarse to fine to accommodate newly laid floors, damaged stone and surface re-polishing. The generous 6.6 gallon solution tank allows for long stretches of uninterrupted usage during wet applications. Thanks to its superior design, the Cimex Diamond Finisher maintains constant pressure on all surfaces. This allows for clean, even cutting without the rotational scoring often found in other floor finishing systems. Also featured is the forward and reverse function. This allows the machine to operate in both directions, ensuring a smooth finish.

Cimex CR48CM Carpet Machine Rental

Daily
$100
(8 Hours)
Rent this machine for 8 hours per day.
Weekly
$300
(40 Hours)
Rent this machine for 40 hours per week.
Monthly
$900
(120 Hours)
Rent this machine for 120 hours per month.
6 Months
Call
(6 Months)
Rent this machine for 6 full months.
12 Months
Call
(1 Year)
Rent this machine for 1 full year.
24+ Months
Call
(2 or More Years)
Rent this machine for 2 full years or more.
Unit is available at our Tallmadge, Cleveland, Columbus, Toledo Ohio & Rockledge Florida Locations. The Rockledge Florida branch serves the Greater Orlando area. Limited delivery options are available. Please contact us for more information.

Cimex CR48CM Carpet Machine

$3,600.00

Questions? Call us at (866) 812-6252

Cimex Machine Includes: 1 Box of Pads Qty 15 1 Quart of Strike Out Spotter 1 Quart of Odor Zyme 4 Gallons of Crystallizing Cleaner The Cimex Carpet Machine sets the industry standard for low moisture carpet encapsulation cleaning. This method of shampooing uses a polymer solution that encases or “encapsulates” the dirt particles. The low moisture aspect of this approach means that it uses very little water compared to the more common hot water extraction technique. As such, you can feel good about reducing waste water and ultimately operating cost. That being said, the main reason to use this machine is the science behind the encapsulation process itself. A frequent problem with regular carpet cleaning is that extractors use a soapy detergent that leaves behind a sticky residue. New dirt particles cling to this residue left on the carpet fibers, thus causing re-soiling. The encapsulation process creates a hard crystal shell around the dirt. Said dirt is then completely removed by vacuuming. Afterwards, the dust bags are neatly discarded. This stands in stark contrast to the dumping of many gallons of dirty water.

Cimex CR38CM Carpet Machine

$3,300.00

Questions? Call us at (866) 812-6252

The Cimex Carpet Machine sets the industry standard for low moisture carpet encapsulation cleaning. This method of shampooing uses a polymer solution that encases or “encapsulates” the dirt particles. The low moisture aspect of this approach means that it uses very little water compared to the more common hot water extraction technique. As such, you can feel good about reducing waste water and ultimately operating cost. That being said, the main reason to use this machine is the science behind the encapsulation process itself. A frequent problem with regular carpet cleaning is that extractors use a soapy detergent that leaves behind a sticky residue. New dirt particles cling to this residue left on the carpet fibers, thus causing re-soiling. The encapsulation process creates a hard crystal shell around the dirt. Said dirt is then completely removed by vacuuming. Afterwards, the dust bags are neatly discarded. This stands in stark contrast to the dumping of many gallons of dirty water.

Chem Bottle Assy-Ecoflex 56601545

$133.19

Chem Bottle Assy-Ecoflex 56601545 for Advenger 2800ST and 3400ST, ES4000 Rider Extractor, Warrior ST and EcoFlex, and SC750 and SC800.
Chem Bottle Assembly – AXP 56315503

$183.15

Chem Bottle Assembly - AXP 56315503 for Nilfisk BRX 700 and 700 EDS,Nilfisk AX 651 Multi EDS, Warrior ST and EcoFlex, Clean Track L24, Convertamatic, AquaPLUS - AquaPLUS AXP - Adphibian, AquaRide and AquaRide AXP, Advance Adhancer W28-C and W32-C, Advance Advenger 2400D, Advance Warrior 28D, Advance Convertamatic 24D-C, Advance Adhancer R28-C, and Advance Adgressor 2820D.
Charger Kit – VF89023US

$740.39

Charger Kit - VF89023US for MA50 15B Auto Scrubber, Brady 15B Micro Scrubber, and Auto Scrubber Fang 15B.
Charger Battery Li 100 to 240 Volt 1 9100002058

$149.70

Charger Battery Li 100 to 240 Volt 1 9100002058 for MA30 13B Auto Scrubber and SC250 Autimatic Scrubber.
Charger Battery 36 Volt 21A 41036A

$1,044.93

Charger Battery 36 Volt 21A 41036A for Fusion 20 and 20T, Advolution 20B and 20 BT, Ultra Speed 20 and 20T, and Focus S28 L28 WB.
Cartridge Filter 75-55L 107407300

$73.51

Cartridge Filter 75-55L 107407300 for VL500-55 Tank Vac, VL500-75 Tank Vac, MAXXI 75 Alto, and MAXXI 55 Alto.
Cartridge Filter 35L 107407297

$61.09

Cartridge Filter 35L 107407297 for VL500-35 Tank Vac, and MAXXI 35 ALTO.
Carpet Wand 12 56265305

$623.58

Carpet Wand 12 56265305 for Clean Track 16 18 and 18W-R, AquaClean 16ST 16XP 18FLX 18ST, Clean Track S16 and L18 Extractors, AquaPLUS - AquaPLUS AXP - Adphibian, Nilfisk AX410, and ES300 ST, XP and ES400 XLP.
Carpet Scrub Wand 12 Head-LP CSW-12

$617.05

Carpet Scrub Wand 12 Head-LP CSW-12 for BEXT Pro Carpet Extractor, ET600, ET610, and EX20 Box Extractor.
Carpet Scrub Wand 12 Head HP CSW-12HP

$853.98

Carpet Scrub Wand 12 Head HP CSW-12HP for Image 26E Wash-Rinse Extractor, Image 16i-ix Wash-Rinse, BextSpot, Image 14 230V, Image 20 I-IX Wash - Rinse 230V, Image 26B Wash-Rinse Extractor, Image 16 I-IX 120V, EX20 Box Extractor, ET610, ET600, and BEXT Pro Carpet Extractor.
Carpet Care Kit 107411865

$74.16

Carpet Care Kit 107411865 for MA10 12E Micro Scrubber and SC100 Micro Scrubber.

BW SCB-1200-K Chassis

Questions? Call us at (866) 812-6252

The SCB-1200-K separates itself from the competition with its removable dumping dust bin and attachment interchangeability making it easy for you switch between shot blasting, scarifying and diamond grinding for all your surface preparation needs.

BW SC-12 Scarifier Head Attachment (for SCB-1200)

Questions? Call us at (866) 812-6252

BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one-handed operation controls for raising and lowering heads, and easy to turn manual steering were designed with the contractor in mind. The SC-12 Scarifying Head attachment is a state of the art design that is self-leveling, automatically adjusting itself to different contours of the floor or pavement. You will achieve an accurate removal of thin mill coatings to 1/4” overlays. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages you can go from steel to carbide cutters as well as different cage widths in minutes. The SCB-1200 with SC-12 Scarifier Head Attachment will put you ahead of the competition with its faster production rates, and a vacuum collector system that eliminates dust and removes all material from the scarified surface.

Rubber Membrane Removal
Concrete Milling
Line Striping
Bridge and Parking Decks

BW SB6 Shot Blaster Rental

Daily
$250
(8 Hours)
Rent this machine for 8 hours per day.
Weekly
$600
(40 Hours)
Rent this machine for 40 hours per week.
Monthly
$1825
(120 Hours)
Rent this machine for 120 hours per month.
6 Months
Call
(6 Months)
Rent this machine for 6 full months.
12 Months
Call
(1 Year)
Rent this machine for 1 full year.
24+ Months
Call
(2 or More Years)
Rent this machine for 2 full years or more.
Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.

BW SB-6 Shot Blaster

Questions? Call us at (866) 812-6252

The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.

BW D-1800-FT4 Chassis

Questions? Call us at (866) 812-6252

The D-1800-FT4 separates itself from the competition with its hydraulic dumping dust bin and attachment interchangeability making it easy for you switch between shot blasting, scarifying and diamond grinding for all your surface preparation needs.

Burnout Mark Remover, Pre-Spray, General Degreaser

Request a Quote
Mark Remover, Pre-Spray and General Degreaser. Ready-to-use pre-spray cleaner with all-natural solvency. Available in 1, 5, 55 and 275 gal. This cleaner has been specifically formulated to remove rubber tire marks on floors and other hard surfaces. Also removes greasy soils, crayon marks, lipstick, smoke film, pencil marks and graffiti on walls, exhaust fans, cabinets, machinery or most any other washable surfaces.

Fast Acting

All-Purpose

Low Odor

VOC Compliant

USDA C-1 Rated

CA Prop 65 Compliant
Bubble Buster – GV25014

$23.19

Bubble Buster - GV25014 for Wet and Dry Vac, Shovelnose Wet Dry Vac, Wet Dry Vac and Summit Pro 18SQ.
Brush Wire-Plastic Back 7-08-03193

$21.77

Brush Wire-Plastic Back 7-08-03193 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush Strip Kit – 16HP 56648414

$10.24

Brush Strip Kit - 16HP 56648414 for ReliaVac 16HP, Advance AdVac 16HP, and SelectVac 16HP.
Brush Strip Kit – 12HP 56648413

$10.24

Brush Strip Kit - 12HP 56648413 for Advance ReliaVac 12HP.
Brush Soft Nylon Sectional 7-08-03248

$30.22

Brush Soft Nylon Sectional 7-08-03248 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush Soft Nylon 32-Yellow 56407473

$278.30

Brush Soft Nylon 32-Yellow 56407473 for Advance Adgressor 2820D, Advance I-MAX 28C-32C, Advance Hydro-Retriever 3200, Advance Hydro-Retriever 2800, SC750 and SC800, and SC900 ST Automatic Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush Sect-Plas-Amerfil 0.040 7-08-03196

$20.37

Brush Sect-Plas-Amerfil 0.040 7-08-03196 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush Polypropylene 32 – Red 56407475

$196.98

Brush Polypropylene 32 - Red 56407475 for Advance Adgressor 2820D, Advance I-MAX 28C-32C, Advance Hydro-Retriever 3200, Advance Hydro-Retriever 2800, SC750 and SC800, and SC900 ST Automatic Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush PolyPro Scrub 17 51705A

$87.59 – $97.86

Genuine OEM Nilfisk-Advance or aftermarket version available. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Brush Poly Scrub F32T – VF84330

$86.69

Brush Poly Scrub F32T - VF84330 for CA90 32T Auto Scrubber and Auto Scrubber Fang 32T.
Brush Nozzle Kit 1408244500

$17.50

Brush Nozzle Kit 1408244500 for GD 320, GWD 320, 335, 350, and 375, Terra 4300 B Rider Sweeper, Summit 9 13 20 20D, VP300 Series, GD 5, 10 and 5 Battery Back Pack, and VP300-Saltix 10 Series.
Brush Multi-Surface 56317047

$194.59 – $210.68

Genuine OEM Nilfisk-Advance or aftermarket version available. Brush Multi-Surface 56317047 for Nilfisk AX 651 Multi EDS, Clean Track L24, and AquaPLUS - AquaPLUS AXP - Adphibian.
Brush Magnagrit 17 56505911

$196.98

Brush Magnagrit 17 56505911 for Pacesetter Floor Machines, Advance Pacemaker 17-20, Advance Pacesetter 17HD-20HD, Advance Pacesetter 170-200, Advance High-Speed Matador 17-20, Advance All-Purpose Matador 17-20, SelectLine 13, SelectLine 17TS, Nilfisk SD 17/20, Advance Shadow 17/20, Advance Shadow 17 Two-Speed, Advance SD 4317, Advance SD 17, and Nilfisk BA 430.
Brush Kit VR19120

$71.59 – $78.75

Genuine OEM Nilfisk-Advance, brush or aftermarket version available. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Brush Diameter 370mm 14 in. Prolene Polypropylene 9099999000

$62.38

Brush Diameter 370mm 14 in. Prolene Polypropylene 9099999000 for Vantage 14, and SC351 Scrubber.
Brush D. 370mm 14 in. Union Mix 9100000000

$97.86

Brush D. 370mm 14 in. Union Mix 9100000000 for Vantage 14 and SC351 Scrubber.
Brush Cylinder 340MM Nylon Black 9100002069

$88.61

Brush Cylinder 340MM Nylon Black 9100002069 MA30 13B Auto Scrubber and SC250 Automatic Scrubber.
Brush Cylinder 340MM Micro 9100002068

$68.27

Brush Cylinder 340MM Micro 9100002068 for MA30 13B Auto Scrubber and SC250 Autimatic Scrubber.
Brush Cylinder 340MM Grit 320 Grey 9100002067

$142.40

Brush Cylinder 340MM Grit 320 Grey 9100002067 for MA30 13B Auto Scrubber and SC250 Autimatic Scrubber.
Brush Cylinder 340M Mednylon White 9100002066

$55.83

Brush Cylinder 340M Mednylon White 9100002066 for MA30 13B Auto Scrubber and SC250 Autimatic Scrubber.
Brush Black Nylon-Plastic Back 7-08-03194

$46.77

Brush Black Nylon-Plastic Back 7-08-03194 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush Assy Solid Back 7-08-03262-1

$582.86

Brush Assy Solid Back 7-08-03262-1 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush Assmebly 18 56265099

$278.30

Brush Assmebly 18 56265099 for ES300 ST, XP and ES400 XLP, AquaClean 16ST 16XP 18FLX 18ST, Clean Track S16 and L18 Extractors, and Klenzor 16.
Brush Assembly Lite Grit 14 – 10383A

$284.84

Brush Assembly Lite Grit 14 - 10383A for Clarke Focus II 28 Disc Rider Scrubber.
Brush Assembly Grit Heavy 14 O – 11426B

$305.19

Brush Assembly Grit Heavy 14 O - 11426B for Clarke Focus II 28 Disc Rider Scrubber.
Brush Assembly 16 56265044

$211.23 – $231.05

Genuine OEM Nilfisk-Advance, brush or aftermarket version available. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary. Compatible with the following models: Advance AquaClean 16ST/16XP Clarke Clean Track S16
Brush Amergrit Plastic Back 7-08-03197

$51.89

Brush Amergrit Plastic Back 7-08-03197 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush 80 Grit 32 – Black 56407477

$332.08

Brush 80 Grit 32 - Black 56407477 for SC900 ST Automatic Scrubber, SC750 and SC800, Advance Hydro-Retriever 2800, Advance Hydro-Retriever 3200, Advance I-MAX 28C-32C, and Advance Adgressor 2820D. Genuine OEM Nilfisk-Advance or aftermarket version available.
Brush 20″ Prolite PPL L08837026

$150.06 – $183.15

Genuine OEM Nilfisk-Advance, brush or aftermarket version available. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary. Compatible with the following models: Advance SC450