The 300BU is a battery operated Ultra-High Speed (“UHS”) burnisher that rapidly produces high levels of gloss on VCT, polished concrete and other hard floor surfaces. The 300BU features SteadyOne™ pad control technology that dramatically improves the performance and life span of burnishing pads while producing excellent single-pass results. This powerful burnisher is available in 20″, 24″, 27″, 28″, and 30″ models.
The 300BU comes with a dust control filter system for clean, quiet and efficient burnishing. Powered by three 12-volt 228 AH batteries, the 300BU can burnish over 26,000 square feet per hour (2400 square meters) and producing only 67 decibels of soft noise. Clean, safe and effective, the 300BU is a burnisher you can count on to maintain floors at any hour in any facility.
Do you ever get inconsistent results with your battery burnisher? It may be because your burnisher doesn’t have the ability to adjust to changing conditions. The 300BU does. With Steadyone Technology built into every 300BU, the burnishing head automatically adjusts to changing floor conditions and changing pad conditions, producing consistent results every time. Exclusive to the 300BU, this “smart” adjustment produces great results – fast – in just a single pass.
SteadyOne™ uses advanced fluid drive technology to maintain constant pad pressure and produce more consistent results. Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today … and tomorrow.
The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder.
The machine comes equipped with a padholder and is available with an optional solution tank.
For Sale
The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder.
The machine comes equipped with a padholder and is available with an optional solution tank.
For Sale
The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
For Sale
The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
For Sale
The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding,
and coating removal.
RELIABLE PERFORMANCE
• 1.5 HP, 2 speed, high torque motor
• Driver speed 175 or 300 rpm
• Strong triple planetary gearbox
• Rugged, all metal construction
• Non-conductive, commercial grade switch housing
SUPERIOR PRODUCTIVITY
• 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr)
• 2.5 gal. (9,5 liter) no-spill solution tank
• Dust containment port for dry applications
• Splash/dust skirt for wet applications
• HydraShine diamond driver uses a passive planetary system
for a superior polish
The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors.
Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class.
The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces.
Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface.
Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class.
The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.
A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine.
VERSATILE
• Strip, deep scrub, and scrub
• 2.5 gal. (9,5 liter) solution tank
PRODUCTIVE
• 120V 1 HP totally enclosed motor
• 12” x 18” (30,5 cm x 45,8 cm) pad size
• 3,600orbits per minute
• 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
USER FRIENDLY OPERATION
• Adjustable, anti-fatigue soft-touch handle
• Dual lever on/off safety switch for left or right hand operation
• Large, non-marking, transport wheels
For Sale
The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate.
RELIABLE PERFORMANCE
• Powerful 18 HP 603cc propane engine with EPSTM technology
• Counter rotating brushes reduce stripper splash
• Ball throttle with electric clutch ensure smooth start up
DESIGNED FOR SAFETY
• Operator Presence automatic shutoff system
• SAFR Technology keeps emissions low even when air filter is dirty
• Muffler system exceeds EPA and CARB minimum requirements
COST EFFECTIVE
• 5 Times LONGER oil change interval than other machines in its class
• Uses 34% LESS fuel than other machines in its class
• Low profile deck for edge-to-edge operation
• Easy pad changes with Rok-BakTM engineering
• Easy access battery service and oil changes
For Sale
The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate.
RELIABLE PERFORMANCE
• Powerful 18 HP 603cc propane engine with EPSTM technology
• Counter rotating brushes reduce stripper splash
• Ball throttle with electric clutch ensure smooth start up
DESIGNED FOR SAFETY
• Operator Presence automatic shutoff system
• SAFR Technology keeps emissions low even when air filter is dirty
• Muffler system exceeds EPA and CARB minimum requirements
COST EFFECTIVE
• 5 Times LONGER oil change interval than other machines in its class
• Uses 34% LESS fuel than other machines in its class
• Low profile deck for edge-to-edge operation
• Easy pad changes with Rok-BakTM engineering
• Easy access battery service and oil changes
Tough, well-built buffers
Keeping your floors buffed, polished and looking their best is an important, never-ending task that requires tough, long-lasting machines. Clarke® CFP Pro® 17HD and 20HD Floor Machines are built Clarke Tough for years of beautiful, high-gloss floors
Simple. Rugged. Affordable.
Clarke CFP Pro 17HD & 20HD Floor Machines are all-metal constructed machines that are easy to use, with foot-activated handle locks, fingertip controls, powerful motors and long cords. Safety features like handle-mounted lockout switches help keep operation safe. And powerful motors get the job done fast.
All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
1.5 hp motor provides plenty of power
Easy-to-use fingertip controls and universal clutch plate make operation simple
Tough, well-built buffers
Keeping your floors buffed, polished and looking their best is an important, never-ending task that requires tough, long-lasting machines. Clarke® CFP Pro® 17HD and 20HD Floor Machines are built Clarke Tough for years of beautiful, high-gloss floors
Simple. Rugged. Affordable.
Clarke CFP Pro 17HD & 20HD Floor Machines are all-metal constructed machines that are easy to use, with foot-activated handle locks, fingertip controls, powerful motors and long cords. Safety features like handle-mounted lockout switches help keep operation safe. And powerful motors get the job done fast.
All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
1.5 hp motor provides plenty of power
Easy-to-use fingertip controls and universal clutch plate make operation simple
Dual speeds, one result: beautiful, high gloss floors, fast
Your floors say a lot about the quality of your organization. The Clarke® CFP Pro® 20DS Floor Machine helps ensure years of beautiful, high gloss finishes that are sure to be noticed.
Simple. Rugged. Versatile.
Featuring rugged, all-metal construction and a high-powered 1.5 hp motor with Dual-Speed rotating action, the Clarke CFP Pro 20DS Floor Machine delivers heavy-duty performance in a wide range of flooring environments. Fingertip controls, handle-mounted lockout switch and safety-yellow cord with convenient cord wrap help maximize safety, simplify use and expedite storage.
Two buffing speeds improve floor care productivity
All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
1.5 hp motor provides plenty of power
Easy-to-use fingertip controls and universal clutch plate make operation simple
Powerful performance. Versatile application.
Continuing the legacy of their extremely popular predecessor, the Clarke® BOS-18, Clarke® FM40™ ST & LX Floor Machines are a significant step forward for Clarke orbital scrubbing floor technology. Available in a standard ST version and a feature-rich LX edition, Clarke FM40 floor machines are engineered to give you the ultimate combination of ease of use and versatility. The result is unmatched performance in both wet and dry applications.
Don’t let their compact size fool you: Clarke FM40 ST & LX Floor Machines have full 1.5 hp motors, 160 pounds of down pressure and 3,540 rpm pad drivers. That means cleaner floors with fewer passes and less strain on your operators.
Do more, work less
Featuring standardized 14-inch x 20-inch pad decks, versatile Clarke FM40 ST & LX Floor Machines are ideal replacements for a variety of other equipment, too. In addition to scrubbing small, hard-to-reach areas where large floor scrubbers are simply ineffective, Clarke FM40s also supplement Clarke scrubbers with BOOST® Technology to remove floor finish without chemicals.
With the right pads, you can even use Clarke FM40s to clean grout in bathrooms, prep or recoat gym floors, bonnet clean carpet, and burnish terrazzo, marble and concrete.
Clean baseboards, too
Now you can clean baseboards without having to purchase a separate machine or, worse, getting down on your hands and knees to scrub. Clarke FM40 ST & LX floor machines come standard with an innovative baseboard cleaner that attaches to the front of the machine to provide a fast, convenient solution for those hard-to-clean baseboards.
1.5 hp motor, 3,540-rpm deck and 20 x 14 inch cleaning path quickly buff wide areas
Three, 21-lb weights maximize down pressure and cleaning effectiveness
Quiet, low-vibration design (68 dB A) allows cleaning in noise-sensitive environments
Baseboard attachment eliminates hand cleaning baseboards
Wheels-up or wheels-down operating modes allow quick switching from traditional floor machine mode to back-and-forth burnisher mode (LX only)
Disassembles without tools to make transport between job sites easy and fast (LX only)
Powerful performance. Versatile application.
Continuing the legacy of their extremely popular predecessor, the Clarke® BOS-18, Clarke® FM40™ ST & LX Floor Machines are a significant step forward for Clarke orbital scrubbing floor technology. Available in a standard ST version and a feature-rich LX edition, Clarke FM40 floor machines are engineered to give you the ultimate combination of ease of use and versatility. The result is unmatched performance in both wet and dry applications.
Don’t let their compact size fool you: Clarke FM40 ST & LX Floor Machines have full 1.5 hp motors, 160 pounds of down pressure and 3,540 rpm pad drivers. That means cleaner floors with fewer passes and less strain on your operators.
Do more, work less
Featuring standardized 14-inch x 20-inch pad decks, versatile Clarke FM40 ST & LX Floor Machines are ideal replacements for a variety of other equipment, too. In addition to scrubbing small, hard-to-reach areas where large floor scrubbers are simply ineffective, Clarke FM40s also supplement Clarke scrubbers with BOOST® Technology to remove floor finish without chemicals.
With the right pads, you can even use Clarke FM40s to clean grout in bathrooms, prep or recoat gym floors, bonnet clean carpet, and burnish terrazzo, marble and concrete.
Clean baseboards, too
Now you can clean baseboards without having to purchase a separate machine or, worse, getting down on your hands and knees to scrub. Clarke FM40 ST & LX floor machines come standard with an innovative baseboard cleaner that attaches to the front of the machine to provide a fast, convenient solution for those hard-to-clean baseboards.
1.5 hp motor, 3,540-rpm deck and 20 x 14 inch cleaning path quickly buff wide areas
Three, 21-lb weights maximize down pressure and cleaning effectiveness
Quiet, low-vibration design (68 dB A) allows cleaning in noise-sensitive environments
Baseboard attachment eliminates hand cleaning baseboards
Wheels-up or wheels-down operating modes allow quick switching from traditional floor machine mode to back-and-forth burnisher mode (LX only)
Disassembles without tools to make transport between job sites easy and fast (LX only)
The Puzzi 8/1 C spray-extraction unit can be used efficiently for upholstery cleaning or for spot cleaning on carpeted floors. Because of the very low residual moisture, cleaned carpets and upholstery dry faster and can be used again more quickly. The handy, compact and powerful Puzzi 8/1 C spray extraction
cleaner is ideal for small areas and interim cleaning with excellent cleaning results.
Includes 8-foot hose, complete with couplings & 4-inch upholstery hand tool.
The Puzzi 30/4 spray extraction cleaner is the economical cleaning solution for large carpet surfaces and makes cleaning ergonomic, stress-free and quick. With a noise level of 66 dB(A), the Puzzi 30/4 spray extraction cleaner is the quietest wet vacuum cleaner in its class and ideal for low-noise cleaning. With an 8 gallon fresh water capacity and a 14" floor nozzle, this innovative spray extraction cleaner is especially suitable for cleaning large carpet areas. The machine design focuses on ergonomic, stress-free and time-saving cleaning. The EASY Operation concept and the ergonomic upright stance make handling much easier. The learning curve is short thanks to easily understandable pictograms. The dirty water tank is removable, and the handle and shape of the tank are designed for ergonomic carrying. The tank is easy to clean, which also makes it suitable for filling the fresh water tank. The short setup period saves time and money. The drying time with this machine is up to 30% shorter than with competitive products. This is partiallydue to the flexible suction lip, which always assures an optimal suction angle. The Puzzi 30/4 is easy to carry, even when lying flat with a full fresh water tank, and its large castor wheels make it easy to transport over stairs.
Think outside of the box. Round is the new square. Why? Simply because it performs better, costs less and is easier to use all day. The versatile Radiant features ORB technology and provides true dual-motion orbital mechanics without the operator experiencing harsh vibrations from the machine. Our pad lies flat on the floor resulting in better productivity, more even pad wear, and improved results. • Provides even pad wear resulting in better, faster performance • Integrated solution system allows for improved control and less waste • Low-vibration design allows for hours of fatigue-free usage • Chemical-free floor finish removal • Clean carpet with low-moisture encapsulation • Make tile & grout shine with the nylon scrub brush • Polish stone with our complete restoration kit • Remove finish from wood, VCT and vinyl floors • Clean indoor and outdoor concrete • Deck can be raised to change pads without tipping machine on its back • Large 10-inch wheels make transportation easy • No isolators to wear out or replace • Every point on the pad oscillates at 1725 rpm while the entire pad spins at 80 rpm • True dual-motion orbital mechanics
The Kärcher BDS 43/Duo C is an all-surface cleaning, scrubbing, sanding, polishing, extraction and grinding floor machine. The patented dual-action Orb Technology gives the BDS 43/Duo C the versatility to clean multiple floor surfaces. Ideal for hard floor areas up to 7,500 square feet per hour and 3,000 square feet per hour of carpeted surfaces. This is truly an all-surface floor machine. Unlike traditional machines, the Kärcher BDS 43/Duo C generates thousands of 3/8” orbital contacts points that spin at 1725 rpms, while at the same time spinning at 80 RPM. The patented Orb Technology is a superior orbital mechanics system. It allows the machine to be more versatile and work on eight different floor surfaces.
Provides exceptional cleaning results and leaves carpets dry enough to re-entry in only 20 minutes. Using encapsulation technology the machine cleans carpets thoroughly with the minimum of effort and downtime. Kärcher’s interim carpet cleaner BRS 43/500 C provides exceptional cleaning results. Interim cleaning works by spraying the carpet with water and detergent, agitating with counter-rotating brushes and vacuuming 20 minutes later with an upright vacuum cleaner. The carpet is then ready for re-entering. By using Kärcher’s innovative Fast Drying Carpet Cleaner RM 768 detergent, which encapsulates dirt particles to separate them from the carpet fibres, the interim process is highly effective and gives amazing results quickly.
Whether in a restaurant, store, hotel or kitchen, the BR 30/4 C scrubs and dries all hard surfaces gently and effectively. Simple to operate as upright vacuum cleaner. The Kärcher BR 30/4 features an upright design for maneuverablity similar to an upright vacuum. 10x contact pressure with the floor combined with a brush that spins at 1,500 RPM gives the BR 30/4 much more cleaning power than a mop. For very sticky dirt, the squeegees can be lifted with a foot pedal. Chemicals have more time to react, for better overall cleaning. Hard to reach areas (e.g., under furniture) are no problem thanks to the very low brush head.
This is the first battery-powered electric broom for commercial users. With its roller brush and dirt container, it functions as a broom and dustpan. Can be used on hard floors and carpets. The EB 30/1 has a foot-operated on/off switch. At 90 mm tall, the unit is flat enough to reach beneath radiators and furniture with low ground clearance. It picks up loose dirt within just 2 mm of its edges. The telescopic broomstick has a push handle and can be adjusted to suit the operator’s height, while a universal joint enables it to move in all directions. When not in use, it locks into the vertical position. The electric broom can run for roughly 30 minutes on carpets and 45 minutes on hard floors before the powerful nickel cadmium battery requires recharging. Charging time can be reduced from 12 hours to 50 minutes using the optional fast charger. Batteries can be swapped to permit uninterrupted working. No tools are required to change batteries or remove the roller brush. Any fibers that get wound around the brush can be removed by running a knife along a specially designed groove to sever them.
This vacuum allows the operator to move around quickly and easily allowing for maximum productivity. To take full advantage of this productivity, we have fitted the BV 7/1 HEPA with a lightweight, ergonomic backpack harness for hours of pain-free operation. The standard HEPA-level filter ensures that this vac is leaving the air in your facility clean and healthy. Clean quietly without worrying about being a noisy distraction. Operating at a mere 67 dBA, this powerful vacuum is quiet, making it perfect for daytime cleaning.
The Kärcher BV 11/1 HEPA backpack vacuum is ergonomically designed, making it comfortable to wear and easy to use. The power switch is mounted on the hip within easy view and reach of the operator. A chest strap ensures better weight distribution and operator comfort. A swivel hose connection is integral to the design for both left-handed and right-handed operators. Included vacuum attachments stow conveniently on the harness for easy accessibility. In addition, the quiet operation of the BV 11/1 HEPA allows for daytime cleaning. The ten quart filter bag provides extra volume for additional productivity. To ensure ultimate air quality, the vacuum is designed with four-stage vacuum filtration. A powerful 1.7 hp vacuum motor powers the BV 11/1 HEPA backpack vacuum's rugged construction and simple design for increased durability.
Rugged Construction The body of the ECO! T11 CartVac is backed by a 10-year warranty for years of use. The front shelf may be used for other cleaning equipment other than the trash can, providing versatility to tackle a variety of cleaning tasks. Easy to Operate Large, well placed handles make maneuvering the Kärcher ECO! T11 Bp Liner CartVac easy. Simple one-touch power switch. Coiled, retractable power cord is easy to manage and discretely stored. Quiet Operation Despite the strong vacuum motor, the 58 dBA noise level is ideal for daytime cleaning. Operating noise level is measured at ear level, using the wand / floor tool. While the sound level at the machine body is actually only 53 dBA. These measurements are done per ISO test standards. The large 12" rear wheels allow for easier maneuverability and less noise especially when transported over thresholds and flooring imperfections. Configured for Productivity Convenience of 4:1 flex hose with aluminum telescoping wand for increased range of motion and productivity. The Home Base supply pouch and mop/broom clips keep everything you need discretely within reach. The industry-leading 100-minute continuous battery run time and 10-quart vacuum bag capacity allows for extended cleaning time.
The BR 47/35 escalator cleaner is perfect for cleaning most types of escalators. It features two counter-rotating brushes, a centering skid and a compact, maneuverable design. Its tank-in-tank design is easy to maintain and the handle folds down for transport making this machine perfect for your facility.
The Kärcher SG1 Bp is a lighter weight version of the SG2. Safe to use on stone, concrete and even carpet. Great for maintaining sidewalks, schools, and retail locations.
Turn up the heat on removing gum once and for all. Features a 1-year warranty and long-life lithium battery for extending working times. Vaporize gum in seconds: Biodegradable vegetable extract heats up debonding agents disolving gum without residue or mess. Low pressure fuel canisters are designed to ensure the delivery of proper fuel volume and safe operation. Ultimate portability: No cords or water required. The long-life lithium battery pack provides cleaning power for up to 4 hours. Lighter weight than many conventional battery back pack systems.
The compact SG 4/4 Steam Cleaner with powerful steam pressure. With variable steam volume control and VapoHydro function this steam cleaner provides perfect cleaning results without the use of chemicals.
The SG 4/4 is a compact and robust steam cleaner which offers outstanding power and certified disinfection*. Optimal cleaning is achieved thanks to 58 PSI steam pressure, variable steam control and the VapoHydro function (continuous regulation of steam saturation). The 2-tank system can be refilled at any time. A rapid heat-up time of the water provides uninterrupted operation. The temperature indicator also helps to provide optimal cleaning results. The SG 4/4 Steam Cleaner is extremely versatile and cleans without the use of chemicals. Standard equipment includes two floor nozzles (for abrasive and hygienic cleaning), an integrated storage compartment for accessories, an integrated cord hook and a pipe intake for space-saving storage. (*According to prEN 16615, PVC floor, machine: SG 4/4 (floor nozzle with slats, 30 cm/sec, max. steam pressure, min. VapoHydro), test bacteria: Enterococcus hirae ATCC 10541)
Steam cleaner and wet/dry vacuum cleaner in one: the user-friendly SGV 6/5 allows steam to be applied and the resulting water to be vacuumed in a single operation.
The easy-to-use SGV 6/5 Steam Cleaner offers hygienic cleanliness. A single machine that is a steam cleaner and wet and dry vacuum cleaner in one. With EASY Operation switch, secure accessory integration and hand tool for controlling the steam/vacuum function. Accessories can be stored directly on the machine, protecting them from dirt and ensuring they are always close to hand.
Stop wash water from flowing down a drain or away from your area by collecting the wastewater from pressure washing. As EPA laws become more prevalent and strive to conserve water quality, contract cleaners and construction sites will need to recover their wash water and runoff.
Eliminate the problem of run off water with the Mississippi Recovery series that is capable of recovering and transferring up to 30 GPM of water and transferring to a holding tank. Its small footprint allows the Mississippi to be mounted on a trailer. Paired directly with the Mosmatic surface cleaner and a pressure washer for a simple and mobile closed loop system. Be fully in control of water flow with the optional water dikes and drain covers to stop water from flowing down a drain or away from your site.
Excellent dust containment is a vital element to producing a quality finish or refinish wood floor job. The new AVAC Q-10 back pack vacuum fills the gap between on-board dust containment and the larger 18 and 26 gallon American Sander vacuums.
This lightweight yet rugged back pack vacuum is ideal for pre and post floor cleaning. Great for screen and re-coat applications using rotary or square buff sanders. This unit includes a 5 stage filtration when H.E.P.A. is installed.
Features:
147 CFM of suction power.
10 quart capacity tank.
Side mounted ON/OFF switch for convenience.
Exhaust air directed away from operator and floor.
Durable locking levers ensure quick access to the bag.
Consistent, High-Performance Floor Polishing
Advolution™ 20 & 20XP corded electric floor burnishers are designed to maximize performance, productivity and ease-of-use. With a 20” burnishing surface and our unique Flex Floor™ Technology for reliable polishing results.
Benefits of Advolution 20 & 20 XP Corded Electric Burnishers
The Advolution 20 & 20XP features our unique Flex Floor Technology that enables the motor to pivot and hug the contours of the floor’s surface. Combined with our patented gas spring technology that regulates head pressure for maximum shine (regardless of operator experience), you’ll get a high-quality, consistent gloss, every time.
Choose the right burnisher for your job — Advolution 20 with 20” burnishing surface running at 1,500 RPM, or 20XP 20” dust control model that runs at 2,000 RPM
Work during the day thanks to the low sound levels of 67 dB A (the volume of standard conversation)
Improve safety and efficiency with the 75 ft. SuperFlex™ cord with quick-release hook, hospital-grade plug and SafeStart™ function
Minimize storage space, and easily access the burnishing pad, thanks to EZ Store™ construction
Expedite service with carbon brush replacement indicator light, electrically detachable motor, easy-access dust bag and maintenance-free transmission and direct drive motors
Turn this extractor into a portable disinfecting machine with the optional Viper Hand Sprayer KitExcellent cleaning and drying performance
The Viper CEX410 is a professional self-contained and silent carpet extractor. With its excellent cleaning performance, you can maintain a variety of textiles such as carpets and upholstery in an efficient and easy way, plus the powerful vacuum motor ensures fast dry-time.
Benefits of CEX410 Self-Contained Carpet Extractor
Low sound level of only 68 ±3 dB(A) enabling daytime cleaning
Productive 120 psi pump working pressure
Easy to service, with tools free maintenance for simplicity
Upholstery and floor tool accessories available for versatility
Foot operated parking stand for brush protection
Compact design with adjustable handle and large transport wheels for maneuverability
STORM™ - Invented specifically for fast, targeted disinfection of common touch points in the fight against Coronavirus..
COMPLETE PRODUCT ADVANTAGES
• Quickly disinfect common touch points, reducing risk of cross infection
• Spray disinfectant evenly to give you solid coverage
• Easy to use system
• Hangs neatly on the wall - GRAB & GO
• Give customers peace of mind - seeing you be proactive in virus control
• Use EPA approved and registered disinfectants proven to kill Coronavirus
• Can be used safely during the day. No risk of setting off fire alarms, unlike Foggers.
STORM WAND ADVANTAGES
• Targeted mist spray on demand
• Use with any disinfectant*
• Super lightweight - 0.6lbs
JET3 - Fitting into spaces other machines simply cannot reach, its powerful scrubbing action releases ingrained dirt from any surface. The M10 Motor delivers considerably high torque (10,000rpm geared to 360rpm) generating exceptional cleaning results. Designed for scrubbing walls up to 3m (9.8ft), JET3 is extremely lightweight at under 2kg (3.3lbs), making it perfect for prolonged use.
Targeted Spray On Demand.
Solution is delivered through the powerful, high pressure pump for targeted application.
The Freedom To Clean Anywhere.
Powered by MotorScrubber Backpack Technology, JET3 allows you access to all the hard to reach areas.
Stair Cleaning Made Easy.
Combine JET3 and the Stair Brush to effortlessly remove dirt and improve the overall hygiene of stairs and skirting boards. The on demand, targeted Spray-Scrub technology allows JET3 to quickly deep clean floors, walls and stairs, removing the need for buckets.
Convert your walk behind scrubber into the ultimate cleaning machine. Delivering industrial cleaning performance on a small scale, attach FORCE to any scrubber dryer to deep clean 100% of the floor.
No More Cleaning Cupboard Visits.
Simply unclip FORCE from the large scrubber dryer, to clean compact spaces as you pass them.
Limitation Free Cleaning.
FORCE vastly improves hygiene results, allowing you to clean areas previously inaccessible with a large scrubber dryer.
Deep Clean & Dry.
A single hose carries power, solution and suction to FORCE from the large scrubber dryer.
Novatek’s durable line of pneumatic & electric HEPA backpack vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous or non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s HEPA backpack vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 3.3 gallon stainless steel backpack recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac. in seconds
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only)
• Tool on/off valve attached to vacuum (pneumatic model only)
• Includes 6' of crush proof vacuum hose
Novatek’s durable line of pneumatic & electric HEPA backpack vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous or non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s HEPA backpack vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 3.3 gallon stainless steel backpack recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac. in seconds
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only)
• Tool on/off valve attached to vacuum (pneumatic model only)
• Includes 6' of crush proof vacuum hose
