Shop commercial grade hand tools for floors and hard surfaces. Free shipping on select products. For assistance in choosing the right machine, please call us at (866) 812-6252. Trade-ins welcome and we offer competitive financing for qualified customers. Conveniently located in Akron, Cleveland, Toledo and Columbus Ohio and Rockledge Florida. Our Rockledge location serves the Greater Orlando area.
Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal.
SAFETY
Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal
SAFETY
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our smallest, most compact inline scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
12CS100 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's Inline Needle & Chisel Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Vibration Reduced scalers (VRS) offer similiar impact and functionality as our standard scalers but with dramatically reduced vibration levels providing more operator safety along with further comfort.
Features & Benefits
• small lightweight compact scalers
• 2200-3800 blows per minute gives maximum performance
• 2mm, 3mm Flat or 3mm chisel Tip Needles (Needle Scaler Models}
• 3/4", 1", 2", 3" heavy duty 1/2" square shank chisels (Chisel Scaler Models)
• Steel components offer durability and long-life
• Low air consumption allows for use on small, portable compressors
• Converts to either a chisel or needle scaler in seconds
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our smallest, most compact inline scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds12NS100 -Needle Scalers
• Equipped with 12pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS100 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact vibration reduced scaler
• Inline configuration allows for access of tight areas
• Steel components offer durability and long-life
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration.
• Operator safety and comfort
VRS019CS -Inline Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19NS100 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19NS100 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact vibration reduced scaler
• Inline configuration allows for access of tight areas
• Steel components offer durability and long-life
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration.
• Operator safety and comfort
VRS019NS -Inline Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Tool-less needle replacement for easy field replacement
• Dust collection shrouds available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's vacuum shrouded "VSE" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. Our VSE scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
19SVSE120 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 3000 blows per minute
• 2mm Optional Needle Holders available
• Lighter in weight for longer run times
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's shrouded vibration reduced "VRS" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. The VRS scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Vibration dampening technology
• Tool-less needle change out
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
28NSVSE110 -Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2200 blows per minute
• 2mm Optional Needle Holders available
• More power for faster production times
The 28PG Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 28PG VRS scalers are our most powerful pistol grip vibration scalers.These models significantly decreases the posibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact, pistol grip vibration reduced scaler
• Pistol grip configuration is ergonomic and comfortable
• Steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration
• Operator safety and comfort
VRS028NPG -Pistol Grip Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Tool-less needle replacement for easy field replacement
• Dust collection shrouds available
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0021 - Workhead w/Roller Kit
• Workhead complete with all its accessories
• Workhead Roller Attachment
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
Novatek's "Ergo" ergonomic designed Long Reach has a unique "S" shape designed to reduce back strain. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials and much more with our chisel and scraper attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. To help save on backaches, try utilizing our ergonomically designed Python Long Reach.
Features & Benefits
• Curved steel configuration for added comfort
• Vibration reducing top handle standard
• Nylon shoulder strap for operator comfort and reducing operator fatigue
• Heavy-duty steel ball retainer
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
