Surface Prep Equipment Archives

Novatek Novair 1000 with Standard Filter

$950.00 – $1,350.00

Questions? Call us at (866) 812-6252

The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.

Features • True 1000 cubic feet per minute air movement with all filters in place. • Powerful 1.00 Hp motor • 110v 60Hz or 220v 50/60Hz • Vertical configuration • Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed motor • “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.

Benefits • Smooth, consistent air flow • Power motor pulls particulate deeper into the media extending filter life • Small footprint-Perfect for tighter areas • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Lightweight and virtually indestructible • Easy to clean and decontaminate
Novatek 5 inch Air Shrouded Grinder

$967.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 7 inch Air Shrouded Grinder

$993.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek Novair 1000 with Alarm and Lights

$1,042.00 – $1,395.00

Questions? Call us at (866) 812-6252

The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.

Features • True 1000 cubic feet per minute air movement with all filters in place. • Powerful 1.00 Hp motor • 110v 60Hz or 220v 50/60Hz • Vertical configuration • Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed motor • “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.

Benefits • Smooth, consistent air flow • Power motor pulls particulate deeper into the media extending filter life • Small footprint-Perfect for tighter areas • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Lightweight and virtually indestructible • Easy to clean and decontaminate
Novatek Contained Blast Systems Workhead with Roller Kit

$1,093.00

Questions? Call us at (866) 812-6252

Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry. Features & Benefits • All steel body for maximum durability • Can be fitted to existing blasting equipment • Works off standard 3/4" blast hose • Utilizes standard blast nozzles • 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator • Replaceable front steel wear sleeves for increased workhead life • Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces • 3" blast pattern • Can be fitted to most existing blast equipment CBS0021 - Workhead w/Roller Kit • Workhead complete with all its accessories • Workhead Roller Attachment • 1 x #4 Blasting Nozzle • 2 x Internal Corner Brushes • 2 x External Corner Brushes • 2 x 2" Steel Wear Sleeves • 2 x 4" Steel Wear Sleeves
American Sanders RS-16 & RS-16DC Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The RS-16 and RS-16DC Rotary Sanders offer strength, durability, and ease of use for those aggressive sanding jobs. Available in standard or dust control (DC) models, these rotary sanders come with a powerful 1.5 hp motor that provides smooth operation and aggressive sanding at an economical price. Features:

Powerful 1.5 hp motor provides smooth operation and aggressive sanding.

Gray non-marking wheels and power cord protect the floor.

Innovative “wiper” style switch keeps the motor contacts clean.

Chrome plated steel housing, motor cover, and handle tube provide maximum durability.

Dust port easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment. (DC model only)

Transparent molded plug has an internal light that serves as a power indicator.

Grip face pad driver supplied with the machine (not shown).
Novatek 28PG Vibration Reduced Needle Scaler Kit

$1,115.00

Questions? Call us at (866) 812-6252

Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 2200-3000 blows per minute gives maximum performance • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • Steel components offer durability and long-life • 2mm Flat & 3mm Flat or chisel Tip Needles available • Vibration dampening technology (VRS Models) • Tool-less needle change out (VRSModels) Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Works on irregular surfaces • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors
Novatek Novair 2000 with Standard Filter

$1,122.00 – $1,890.00

Questions? Call us at (866) 812-6252

The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
Novatek Novair 2000 with HEPA Filter

$1,122.00 – $1,890.00

Questions? Call us at (866) 812-6252

The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
Novatek Novair 2000 with Alarm and Light

$1,210.00 – $1,972.00

Questions? Call us at (866) 812-6252

The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
SPE RMS Magnetic Floor Sweeper

Request a Quote
Questions? Call us at (866) 812-6252

The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place.

Collects ferrous and metallic debris from floor after blasting

Simple operation

50 year magnet life

The simply operated release mechanism enables easy depositing of debris after collection. The permanent magnet will retain its power for 50 years and requires no maintenance. The height is adjustable to cope with large waste and uneven surfaces. The standard sweepers range in size from 310mm to 915mm wide but alternative towable and forklift mounted models are available.

Husqvarna A2000 Air Scrubber

$1,255.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. A 2000 is one of the most advanced portable air cleaners available on the market. It is tested and certified for use as both an air cleaner and a negative air machine. Thanks to a reliable filter system and a design that is perfectly matched to operation with HEPA class H13 filters, that are tested and certified at an efficiency rate of 99.99% at 0.3 microns, the air cleaner puts out superior air quality – be it when dealing with concrete dust, fine sanding dust or gypsum dust. It has two warning lights to indicate when the filters are clogged or leaking. Operates at two very quiet speeds. Thanks to the compact design, the unit is easy to move and transport. Non-marking, lockable wheels allows for easy transport.

National 3435 5″ Hand Held Grinder

$1,392.94

Questions? Call us at (866) 812-6252

Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal SAFETY

Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud

COMFORT

Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue

PERFORMANCE

Accommodates multiple styles of diamond turbo cup wheels

National 3535 Corner Preparation & Polishing Tool

$1,392.94

Questions? Call us at (866) 812-6252

This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames. SAFETY

Loop handle enables precision handling

PERFORMANCE

Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion

Novatek Hydra 2 inch Kit

$1,450.00

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
Novatek Hydra – Complete Kit 2 and 2.5 inch

$1,475.00

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
Novatek 2 inch Air RotoPeen with Star Cutter

$1,587.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen with Star Cutters

$1,595.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Bersi T0 Pre Separator

$1,600.00

Questions? Call us at (866) 812-6252

When large amount of dust produced during the grinding, it is advisable to use a pre-separator. The special cyclone system captures 98% of the material before vacuuming, greatly improve the filter efficiency and protect your dust extractor from clogging easily. T0 can be used in conjunction with all common industrial vacuums and dust extractors.
Novatek 2 inch Air RotoPeen with Flaps

$1,638.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen with Flaps

$1,725.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal

Husqvarna DE 110 H Dust Extractor

$1,784.50

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. It is equipped with a user friendly HMI that monitors performance and an e-flow function that automatically adjusts the air flow, enabling stable air flow and extending intervals between filter-cleanings. Its high water protection allows fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, run-time, service and filter status along with other valuable usage data.

Novatek 4 inch Air RotoPeen with Star Cutter

$1,803.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Flaps

$1,849.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Electric RotoPeen with Flaps

$1,849.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal

Husqvarna DE 110i H Dust Extractor

$1,851.58

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is powered by Husqvarna’s own 36 V BLi batteries and is an excellent match for handheld battery equipment. It features a user-friendly HMI and an e-flow function that automatically adjusts the air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.

Husqvarna DE 110 SH Dust Extractor

$1,881.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. Its three-stage filtration process inlcuding large filter surfaces enables long run-time between filter cleanings. Its high water protection allows fast and efficient decontamination.

Husqvarna FS 309 Flat Saw

$2,107.38

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The FS 300-series includes lightweight and compact floor saws. These saws are ideal for small repair jobs and are very easy to handle. They can be transported in any small vehicle. Shown with OPTIONAL water tank.

Novatek 2 inch Air RotoPeen Kit

$2,117.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen Kit

$2,117.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal

National Power Hammer Trolley

$2,236.94

Questions? Call us at (866) 812-6252

Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition. TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K

Gorilla GCT-9 Silverback Dustless Electric Crack Chaser

$2,286.02
Questions? Call us at (866) 812-6252

Features

Locking/swiveling rear casters

Excellent dust control

Fast depth adjustment

Easy blade lift lower

Multifunctional
Bersi TS2100 H13 HEPA Dust Extractor

$2,350.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.110V/2.4KW TS2100 is a two engine HEPA dust extractor. It is equipped with a main filter as the first and two H13 filter as the final.Each HEPA filter is individually tested and certified to have a minimum efficiency of 99.97% @ 0.3 microns. which meets the new silica requirements.This professional dust extractor is excellent for building, grinding, plaster and concrete dust.

Edco 14″ Compact Saw – Downcut

$2,364.86

Questions? Call us at (866) 812-6252

MODEL: KL-14

14” Blade Capacity
Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
Heavy-Duty Box Frame Construction
Laser Fabricated Thick Steel Material
Easy-Use Hand Wheel Depth Control
Misting system for wet cutting
Thick steel blade guard for added safety
Easy access belts and bearings for fast maintenance
Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint

Husqvarna FS 400 Flat Saw

$2,576.52

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Our robust FS 400 LV is a convenient all-round petrol push floor saw. The adjustable handle ensures an ergonomic working position. Perfect weight distribution gives excellent stability while sawing. Ideal for small road repair jobs in concrete or asphalt, up to 189 mm cutting depth.

American Sanders Super 7R Edger

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Super 7R is the most efficient wood floor edger in the industry. Designed for both power and durability, it has been the edger of choice for the pro contractor for over 50 years. Equipped with a quick release dust bag and the ability to attach directly to a vacuum, this edger continues to outpace the competition. Features:

Hardened steel pinion with brass drive gear reduces vibration.

Precision-balanced sanding pad produces finer finish.

Powerful 1 hp motor maintains speed under the heaviest cutting conditions.

Rotating dust pipe swivels 210 degrees to allow access to tight spaces and easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment.

Quick release dust bag that slides on and off with a simple twist and pull.

Transparent molded plug has an internal light that serves as a power indicator.
Novatek 4 inch Air RotoPeen Kit

$2,648.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Blastrac BDC-22 Dust Collector

$2,700.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Blastrac BDC-22 dust collector is equipped with a Longopac bagging system, which is easy to mount and handle. Thanks to this system, the operators have no more contact with the dust in their direct vicinity. The Blastrac BDC-22 dust collection system is equipped with a M-class star filter and it is very versatile. The BDC-22 is ideally suited for use with medium shot blasting, grinding, polishing and scarifying machines. For a safe, dust free and perfectly clean jobsite Blastrac has designed a full range of consumables and optional items to get the best possible results out of your dust collector. Easy to maneuverer and transport due to the robust wheels with brake systems. User friendly design, just connect the hose to the dust collector and you are ready to go. Limited downtime is essential for any successful job. Due to the special designs our medium dust collection systems allows you to change the dust bag quickly for limited downtime.
American Sanders AVAC 18 Dust Containment System

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The AVAC 18 dust containment system delivers high-end filtration performance and capacity in a more compact unit that is perfect for single machine operations. Features:

Top level power in a compact unit

Easier to transport and store than a larger machine

Superior filtration for dust-free applications

High capacity allows for long single machine run times
American Sanders CE7 Pro+ Edger

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The CE7 Pro+ edger is ideal for sanding under cabinets and along wall lines, closets, and stair landings. This machine is equipped with a powerful two speed motor that delivers superior performance in the most difficult sanding applications. With adjustable handles, vac ready dust control features, and powerful LED lights, this edger is perfect for the professional contractor. Features:

Hook and loop or bolt-on sandpaper-ready.

Dual non-marking casters.

Safety start switch.

Two-speed motor for different surfaces and conditions.

Powerful LED lighting.

Innovative dust bag features internal support.

Dust control vacuum-ready.

Handle height adjustment for operator comfort.

Effectively sands under 3.5” toe-kicks.