Surface Prep Equipment Archives

Novatek 28 Pistol Grip Chisel Scaler

Request a Quote

Questions? Call us at (866) 812-6252

The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.

Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds

28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 28 Pistol Grip Needle Kit Super Scraper

Request a Quote

Questions? Call us at (866) 812-6252

The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.

Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds

28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 28 Pistol Grip Needle Scaler Kit

Request a Quote

Questions? Call us at (866) 812-6252

The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.

Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds

28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 28 Pistol Grip Super Scraper Scaler

Request a Quote

Questions? Call us at (866) 812-6252

The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.

Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds

28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 28PG Vibration Reduced Needle Scaler Kit

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 2200-3000 blows per minute gives maximum performance • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • Steel components offer durability and long-life • 2mm Flat & 3mm Flat or chisel Tip Needles available • Vibration dampening technology (VRS Models) • Tool-less needle change out (VRSModels) Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Works on irregular surfaces • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors
Novatek 28PG Vibration Reduced Needle Scaler Package

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's shrouded vibration reduced "VRS" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. The VRS scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Features • Vibration dampening technology • Tool-less needle change out • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • 2mm Flat & 3mm Flat or chisel Tip Needles available Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors 28NSVSE110 -Needle Scalers • Equipped with 28pcs -3mm x 7" chisel tip needles • 2200 blows per minute • 2mm Optional Needle Holders available • More power for faster production times
Novatek 28PG Vibration Reduced Needle Scalers

Request a Quote

Questions? Call us at (866) 812-6252

The 28PG Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 28PG VRS scalers are our most powerful pistol grip vibration scalers.These models significantly decreases the posibility of vibration related injuries. All the power with less vibration. Features & Benefits • Our most compact, pistol grip vibration reduced scaler • Pistol grip configuration is ergonomic and comfortable • Steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration • Operator safety and comfort VRS028NPG -Pistol Grip Needle Scalers • Equipped with 28pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Tool-less needle replacement for easy field replacement • Dust collection shrouds available
Novatek 35 Chisel Scaler

Request a Quote

Questions? Call us at (866) 812-6252

The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our most powerful offset scaler • Powerful and light-weight • All steel components offer durability and long-life • 1800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 35CS100 -1/2" Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 35 Needle Scaler Kit

Request a Quote

Questions? Call us at (866) 812-6252

The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our most powerful offset scaler • Powerful and light-weight • All steel components offer durability and long-life • 1800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 35CS100 -1/2" Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 4 inch Air RotoPeen Kit

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Flaps

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Star Cutter

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Electric RotoPeen with Flaps

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 5 ft. Aluminum Long Reach Scaler

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Aluminum Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel internal components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
Novatek 5 ft. Aluminum Long Reach Scalers with Needle Attachment

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Aluminum Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel internal components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
Novatek 5 ft. Steel Long Reach Scaler

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Steel Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
Novatek 5 ft. Steel Long Reach Scalers with Needle Attachment

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Steel Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
Novatek 5 inch Air Shrouded Grinder

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 5 inch Electric Shrouded Grinder

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 7 inch Air Shrouded Grinder

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 7 inch Electric Shrouded Grinder

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek Contained Blast Systems Workhead with Roller Kit

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry. Features & Benefits • All steel body for maximum durability • Can be fitted to existing blasting equipment • Works off standard 3/4" blast hose • Utilizes standard blast nozzles • 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator • Replaceable front steel wear sleeves for increased workhead life • Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces • 3" blast pattern • Can be fitted to most existing blast equipment CBS0021 - Workhead w/Roller Kit • Workhead complete with all its accessories • Workhead Roller Attachment • 1 x #4 Blasting Nozzle • 2 x Internal Corner Brushes • 2 x External Corner Brushes • 2 x 2" Steel Wear Sleeves • 2 x 4" Steel Wear Sleeves
Novatek ERGO Steel Long Reach Scaler

Request a Quote

Questions? Call us at (866) 812-6252

Novatek's "Ergo" ergonomic designed Long Reach has a unique "S" shape designed to reduce back strain. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials and much more with our chisel and scraper attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. To help save on backaches, try utilizing our ergonomically designed Python Long Reach. Features & Benefits • Curved steel configuration for added comfort • Vibration reducing top handle standard • Nylon shoulder strap for operator comfort and reducing operator fatigue • Heavy-duty steel ball retainer • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor
Novatek Heavy Duty Single Scaling Hammer – Long Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits

• Hard hitting / fractures coatings • 2500 blows per minute • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seal cleans piston on every stroke • Brush seal technology helps extend piston life • Screw top cap for simple head and piston replacement • Single piece piston and tips assure durability
Novatek Heavy Duty Single Scaling Hammer – Short Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits

• Hard hitting / fractures coatings • 2500 blows per minute • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seal cleans piston on every stroke • Brush seal technology helps extend piston life • Screw top cap for simple head and piston replacement • Single piece piston and tips assure durability
Novatek Heavy Duty Triple Scaling Hammers – Long Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits

• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seals clean pistons on every stroke • Brush seal technology to extend piston life • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek Heavy Duty Triple Scaling Hammers – Short Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits

• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seals clean pistons on every stroke • Brush seal technology to extend piston life • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek Hydra – Complete Kit 2 and 2.5 inch

Request a Quote

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
Novatek Hydra 2 inch Kit

Request a Quote

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
Novatek Infrared Nova-Strip 1026

Request a Quote

Questions? Call us at (866) 812-6252

The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal. This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.

Features & Benefits • 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle • Ceramic coated heat panel provides long life and durability • Computerized control systems guarantee precise and dependable operation • 100% solid state electronics. No mechanical relays or solenoids • Rapid heat up and cool down • Powder coated aluminum is durable and light-weight • Triple redundant safety features for operator safety • Integrated temperature indicator allows for monitoring of panel base • Operate on standard 220v, 50amp service eliminating external buck boosters” • 12v DC controls allow for safe, cool operation and long life • Case grounded for added safety
Novatek Nova-Strip 378

Request a Quote

Questions? Call us at (866) 812-6252

The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles. Features • 378 square inch footprint removes 2-12”x12” in one cycle • Operates off of 110v - 20amp current • Identical controller to the N1026 • Compact design allows easy access to tight spaces. • Heavy duty and light-weight aluminum construction
Novatek Nova-Strip Eco-Strip 100 115V

Request a Quote

Questions? Call us at (866) 812-6252

The EcoStrip 100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs. and utilizing a 15 amp, 110volt grounded outlet makes this an all around winner. The Ecostrip heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. Features • 196 square inch footprint removes 1 - 12”x12” in one cycle • Operates on 110V -15amp current • Safety sensor shuts down machine if left unattended • Compact design allows easy access to tight including steps and closets • The perfect compliment to the N378 and N1026 models • Heavy duty and light-weight aluminum construction
Novatek Novair 1000 with Alarm and Lights

Request a Quote

Questions? Call us at (866) 812-6252

The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.

Features • True 1000 cubic feet per minute air movement with all filters in place. • Powerful 1.00 Hp motor • 110v 60Hz or 220v 50/60Hz • Vertical configuration • Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed motor • “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.

Benefits • Smooth, consistent air flow • Power motor pulls particulate deeper into the media extending filter life • Small footprint-Perfect for tighter areas • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Lightweight and virtually indestructible • Easy to clean and decontaminate
Novatek Novair 1000 with Standard Filter

Request a Quote

Questions? Call us at (866) 812-6252

The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.

Features • True 1000 cubic feet per minute air movement with all filters in place. • Powerful 1.00 Hp motor • 110v 60Hz or 220v 50/60Hz • Vertical configuration • Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed motor • “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.

Benefits • Smooth, consistent air flow • Power motor pulls particulate deeper into the media extending filter life • Small footprint-Perfect for tighter areas • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Lightweight and virtually indestructible • Easy to clean and decontaminate
Novatek Novair 2000 with Alarm and Light

Request a Quote

Questions? Call us at (866) 812-6252

The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
Novatek Novair 2000 with HEPA Filter

Request a Quote

Questions? Call us at (866) 812-6252

The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
Novatek Novair 2000 with Standard Filter

Request a Quote

Questions? Call us at (866) 812-6252

The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
Novatek Shrouded Heavy Duty Single Scaling Hammer – Long Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life
Novatek Shrouded Heavy Duty Single Scaling Hammer – Short Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life
Novatek Shrouded Heavy Duty Triple Scaling Hammers – Long Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek Shrouded Heavy Duty Triple Scaling Hammers – Short Handle

Request a Quote

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)

Pioneer Eclipse 420GPHD Concrete Polisher

Request a Quote

Questions? Call us at (866) 812-6252

The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors. Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class. The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter

Pioneer Eclipse 450GP Concrete Grinder & Polisher

Request a Quote

Questions? Call us at (866) 812-6252

The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces. Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface. Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class. The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.

SPE 12DC Dust Collector

Request a Quote

Questions? Call us at (866) 812-6252

SPE 12DC Dust Collector

Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.

SPE 16DC Dust Collector

Request a Quote

Questions? Call us at (866) 812-6252

SPE 16DC Dust Collector

Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.

SPE 20DC Dust Collector

Request a Quote

Questions? Call us at (866) 812-6252

SPE 20DC Dust Collector

Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.

SPE BEF 275 Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

SPE BEF 275 Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

SPE BEF200N-2A Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

SPE BEF200N-4A Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle