Industrial Cleaning & Surface Preparation Equipment Specialists (866) 662-6710
  • Questions? Call us at (866) 812-6252

    MODELS: CPU-10FC-G, CPU-10-FC-E
    • 10″ working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8″
    • Adjustable depth control up to 3/16″ working depth per pass
    • Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
    • Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
    • Includes lifting bail, oil alert and hour meter
    • Optional outrigger axle enables the CPU-10(FC) to follow slab contours closely when working on uneven surfaces
    • Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes
  • Questions? Call us at (866) 812-6252

    Models: CPM-10G, CPM-10E
    • 10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
    • 1/4” steel frame
    • Heavy-duty, oversized bearings
    • Weighs 299 lbs. with cutters
    • Tethered emergency stop switch
    • Larger 6” wheels in the rear for easy handling
    • Gasoline or Electric models available
    • Vacuum port standard for dust-free cutting
    • 6-Shaft and 8-Shaft easy change, side loading drums available
    • Tungsten carbide or steel cutters available
  • Questions? Call us at (866) 812-6252

    MODEL: KL-14
    • 14” Blade Capacity
    • Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
    • Heavy-Duty Box Frame Construction
    • Laser Fabricated Thick Steel Material
    • Easy-Use Hand Wheel Depth Control
    • Misting system for wet cutting
    • Thick steel blade guard for added safety
    • Easy access belts and bearings for fast maintenance
    • Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint
  • Questions? Call us at (866) 812-6252

    Model: KL-18 BLADE NOT INCLUDED
    • 18″ blade capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail (optional)
    • 13 HP gasoline engine
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • High quality molded rubber wheels
  • Questions? Call us at (866) 812-6252

    Model: DS-20 BLADE NOT INCLUDED
    • 20″ Blade Capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Heavy-Duty Anti-Vibration engine mount!
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail for easy loading and unloading
    • 13 HP gasoline engine or 7.5 HP electric options
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • Solid-Steel lifting handles
    • High quality molded rubber wheels
  • Edco 20″ Self-Propelled Saw

    $10,035.45$12,971.58

    Questions? Call us at (866) 812-6252

    Model: SS-20
    • Stressproof, precision-machined, 1 3/4″ steel arbor shaft
    • Includes electric start, 12-volt battery and heavy-duty 15-amp charging system
    • Swing-away, rear 3-gallon fuel tank
    • Screw-type depth control w/lock guarantees accurate cutting
  • Edco 2EC Grinder Surfacer (As-Is)

    $1,500.00$1,800.00

    Questions? Call us at (866) 812-6252

    Unit sold as is and is not in working condition. Great for parts or a refurbishing project. For additional details please contact us. We have hundreds of commercial cleaning  and surface preparation equipment cores available at any of our four Ohio locations located in Akron, Cleveland, Toledo and Columbus. These units come from several sources such as local trade ins and out of our short or long-term rental fleet.
       
  • Questions? Call us at (866) 812-6252

    MODEL: CD-3
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 100 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Three, 5 Point Carbide Bits included
  • Questions? Call us at (866) 812-6252

    MODEL: CD-5
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 160 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation
    • Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Five, 5 Point Carbide Bits included
  • Edco 8″ Walk-Behind Crete-Planer

    $6,485.31$10,793.48

    Questions? Call us at (866) 812-6252

    MODELS: CPM-8G, CPM-8E
    • 8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″
    • Removes traffic lines at 800-1,000 lineal ft. per hour
    • Power source over drum to eliminate vibration and maximize surface contact
    • Compact design
    • Front-mounted lifting handle makes loading and unloading easy
    • Vacuum port equipped
  • Questions? Call us at (866) 812-6252

    MODELS: CPL-8E, CPL-8G
    • 8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
    • 8-Inch, 6-Shaft drum accepts carbide and steel cutters
    • Etch the surface for new coatings
    • Available in 1.5HP Electric or 5.5HP Gasoline
    • Comes standard with universal vacuum port hookup
    • Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane
  • Daily

    $325

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $825

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $2400

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
  • Daily

    $325

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $825

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $2400

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
  • Daily

    $250

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $750

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $2200

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
  • Questions? Call us at (866) 812-6252

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders
  • Questions? Call us at (866) 812-6252

    The TG-10 is four times faster than conventional grinders.
    • 10″ Working width will grind approximately 400-500 sq. ft. per hour at 1/16″ with an Magna-Trap® Dyma-Dots
    • Grind wet or dry
    • Includes 10″ Magna-Trap Multi-Tooling Disc & standard vacuum port
    • Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
    • Less torque on operator
    • Tapered roller bearings have improved seals for longer life and less maintenance
    • Adjust your grinder disc or multi-accessory plate with the rear wheel mounted level kit
    • Easy access turn style knob
    • Install different height diamond accessories and level them to ensure maximum productivity
  • Questions? Call us at (866) 812-6252

    • Three-position articulating frame adjustment for left angle, right angle or straight position grinding
    • Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
    • Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
    • Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
    • Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
    • Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
    • New & improved tapered roller bearings provide less maintenance and longer life
  • Questions? Call us at (866) 812-6252

    MODELS: 2EC-NG, 2GC-NG

    The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight! Multi-Vac port for use with 2″ or 3″ vacuum hose 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts Gas & electric power options available Includes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control 6 grinding accessories required per loading
  • Questions? Call us at (866) 812-6252

    • 22″ Working Width grinds approximately 500 sq. ft. per hour at 1/32″ – 1/16″ per pass with Magna-Trap® Dyma-Dots
    • Includes 2-Slide-On Multi-Accessory Discs, which accept all EDCO Magna-Trap® Tooling
    • 2-3″ Vacuum Port and Water Port
    • 6 Magna-Trap® Tooling accessories required per loading
    • Fully adjustable rubber dust shroud
    • Optional triangular polishing head for full coverage available
  • Questions? Call us at (866) 812-6252

    The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.
    • Resurfaces hundreds of sq ft per hour
    • Compatible with EDCO Vortex 200 Vacuum for dust-free working
    • At only 90lbs it fits inside car trunks when the handlebar is collapsed
    • Accepts EDCO Magna-Trap® Slide-On Tooling
  • Questions? Call us at (866) 812-6252

    MODEL: TLR-7

    Remove traffic lines from asphalt – and get the job done quickly!

    EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones. Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
    • 7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
Go to Top