The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.
Resurfaces hundreds of sq ft per hour
Compatible with EDCO Vortex 200 Vacuum for dust-free working
At only 90lbs it fits inside car trunks when the handlebar is collapsed
The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used.
NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight!
Multi-Vac port for use with 2″ or 3″ vacuum hose
22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts
Gas & electric power options availableIncludes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories
Counter-rotating discs prevent machine from pulling side to side and give operator greater control
6 grinding accessories required per loading
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used.
Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed
Multi-Vac port for use with 2″ or 3″ vacuum hose
11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets
Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading
EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders
Three-position articulating frame adjustment for left angle, right angle or straight position grinding
Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
New & improved tapered roller bearings provide less maintenance and longer life
Unit sold as is and is not in working condition. Great for parts or a refurbishing project. For additional details please contact us. We have hundreds of commercial cleaning and surface preparation equipment cores available at any of our four Ohio locations located in Akron, Cleveland, Toledo and Columbus. These units come from several sources such as local trade ins and out of our short or long-term rental fleet.
Remove traffic lines from asphalt – and get the job done quickly!
EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones.
Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.