The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
STORM™ - Invented specifically for fast, targeted disinfection of common touch points in the fight against Coronavirus..
COMPLETE PRODUCT ADVANTAGES
• Quickly disinfect common touch points, reducing risk of cross infection
• Spray disinfectant evenly to give you solid coverage
• Easy to use system
• Hangs neatly on the wall - GRAB & GO
• Give customers peace of mind - seeing you be proactive in virus control
• Use EPA approved and registered disinfectants proven to kill Coronavirus
• Can be used safely during the day. No risk of setting off fire alarms, unlike Foggers.
STORM WAND ADVANTAGES
• Targeted mist spray on demand
• Use with any disinfectant*
• Super lightweight - 0.6lbs
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Unit is available at our Tallmadge, Cleveland, Columbus, Toledo Ohio & Rockledge Florida Locations. The Rockledge Florida branch serves the Greater Orlando area. Limited delivery options are available. Please contact us for more information.
Questions? Call us at (866) 812-6252
Industrial Grade Cleaning Productivity The SC6000™ is a next generation ride-on scrubber with the size, speed and innovative technology to clean large areas at a low Total Cost of Ownership — making it a preferred choice at production sites, warehouses, supermarkets, airports and more.
Benefits of SC6000 Industrial Rider Floor Scrubbers The SC6000, designed to deliver hours of superior, high-speed cleaning and drying, provides 30% greater runtime/productivity than the nearest competitor in its class. Equipped with SmartFlow™ Technology or the optional EcoFlex™ System, the green-cleaning SC6000 will save you money on water and detergent while maximizing your runtime.
Choose the right floor scrubber for your application — 3 scrubbing types (36” Cylindrical, 34” Disc, or 40” Disc) Control user access with our innovative SmartKey™ System Invest in a floor scrubber that’s built to last — protected scrub deck, tubular frame and extended life cylindrical deck components Effectively clean hard-to-reach areas with the offset scrub deck Simplify maintenance with the tool-free design and click-on brushes Suppress dust and deliver true edge cleaning with our optional DustGuard™ misting system
Novatek's vacuum shrouded "VSE" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. Our VSE scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
19SVSE120 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 3000 blows per minute
• 2mm Optional Needle Holders available
• Lighter in weight for longer run times
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's shrouded vibration reduced "VRS" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. The VRS scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Vibration dampening technology
• Tool-less needle change out
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
28NSVSE110 -Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2200 blows per minute
• 2mm Optional Needle Holders available
• More power for faster production times
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's "Ergo" ergonomic designed Long Reach has a unique "S" shape designed to reduce back strain. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials and much more with our chisel and scraper attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. To help save on backaches, try utilizing our ergonomically designed Python Long Reach.
Features & Benefits
• Curved steel configuration for added comfort
• Vibration reducing top handle standard
• Nylon shoulder strap for operator comfort and reducing operator fatigue
• Heavy-duty steel ball retainer
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0020 - Workhead Kit
• Workhead complete with all its accessories
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0021 - Workhead w/Roller Kit
• Workhead complete with all its accessories
• Workhead Roller Attachment
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
JET3 - Fitting into spaces other machines simply cannot reach, its powerful scrubbing action releases ingrained dirt from any surface. The M10 Motor delivers considerably high torque (10,000rpm geared to 360rpm) generating exceptional cleaning results. Designed for scrubbing walls up to 3m (9.8ft), JET3 is extremely lightweight at under 2kg (3.3lbs), making it perfect for prolonged use.
Targeted Spray On Demand.
Solution is delivered through the powerful, high pressure pump for targeted application.
The Freedom To Clean Anywhere.
Powered by MotorScrubber Backpack Technology, JET3 allows you access to all the hard to reach areas.
Stair Cleaning Made Easy.
Combine JET3 and the Stair Brush to effortlessly remove dirt and improve the overall hygiene of stairs and skirting boards. The on demand, targeted Spray-Scrub technology allows JET3 to quickly deep clean floors, walls and stairs, removing the need for buckets.
Remediation, air scrubbing, restoration, healthcare, and clean rooms are only a few applications for the new Novair 700 portable air filtration unit. Available in a variety of power sources (115v-220v 50/60Hz) and filter configurations.• More power: The Novair 700 is the most powerful impeller driven variable speed adjustment, is capable of delivering 200-700 CFM and dramatically increases filter life.
• Versatility: The Novair 700 portable air filtration is at home in applications ranging from asbestos removal, restoration projects, airborne pathogens and medical uses. The tri gasketing and HEPA filter sealing flange, guarantee leak proof operation. The quick release intake door accepts MERV, carbon, and standard dust filters. Integrated nesting allows for the stacking of multiple machines. The built-in GFCI outlet allows you to connect multiple equipment up to 15 amps.
• Virtually indestructible: The heavy duty roto molded polyethylene shell, is dent proof, leak proof and virtually indestructible.
• Standard filters: 16” x 16” x 3” high capacity HEPA filter is standard. No outrageously priced proprietary filters needed. These economical filters are readily available.
• Low power requirements: Drawing only 3 amps, the 700 can be daisy chained up to three units. The built in GFCI outlets allow for safe and effective operation. The Novair’s straight through design makes it ideal for virtually any application.
• Utilizes standard "Lay flat" or flex ducting: 10 to 12 inch vacuum ports allows for maximum airflow with little restriction.
The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Features
• True 1000 cubic feet per minute air movement with all filters in place.
• Powerful 1.00 Hp motor
• 110v 60Hz or 220v 50/60Hz
• Vertical configuration
• Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed motor
• “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.
Benefits
• Smooth, consistent air flow
• Power motor pulls particulate deeper into the media extending filter life
• Small footprint-Perfect for tighter areas
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Lightweight and virtually indestructible
• Easy to clean and decontaminate
The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device.
Features & Benefits
• Focused water stream reaches heights of 100ft. or more (30 meters or more)
• Corrosion resistant, solid stainless steel body
• Heavy-duty tripod provides a rugged and stable platform
• No moving parts to wear
• Swiveling head allows for simple operation
• Integrated “ball valve” for regulating jet stream and pressure
• Easy quick cam connections for easy and rapid connection of hoses
• Recognized anti-piracy device
Convert your walk behind scrubber into the ultimate cleaning machine. Delivering industrial cleaning performance on a small scale, attach FORCE to any scrubber dryer to deep clean 100% of the floor.
No More Cleaning Cupboard Visits.
Simply unclip FORCE from the large scrubber dryer, to clean compact spaces as you pass them.
Limitation Free Cleaning.
FORCE vastly improves hygiene results, allowing you to clean areas previously inaccessible with a large scrubber dryer.
Deep Clean & Dry.
A single hose carries power, solution and suction to FORCE from the large scrubber dryer.
The EcoStrip 100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs. and utilizing a 15 amp, 110volt grounded outlet makes this an all around winner.
The Ecostrip heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.
Features
• 196 square inch footprint removes 1 - 12”x12” in one cycle
• Operates on 110V -15amp current
• Safety sensor shuts down machine if left unattended
• Compact design allows easy access to tight including steps and closets
• The perfect compliment to the N378 and N1026 models
• Heavy duty and light-weight aluminum construction
The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal.
This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.
Features & Benefits
• 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle
• Ceramic coated heat panel provides long life and durability
• Computerized control systems guarantee precise and dependable operation
• 100% solid state electronics. No mechanical relays or solenoids
• Rapid heat up and cool down
• Powder coated aluminum is durable and light-weight
• Triple redundant safety features for operator safety
• Integrated temperature indicator allows for monitoring of panel base
• Operate on standard 220v, 50amp service eliminating external buck boosters”
• 12v DC controls allow for safe, cool operation and long life
• Case grounded for added safety
The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.
To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles.
Features
• 378 square inch footprint removes 2-12”x12” in one cycle
• Operates off of 110v - 20amp current
• Identical controller to the N1026
• Compact design allows easy access to tight spaces.
• Heavy duty and light-weight aluminum construction
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
