Industrial Cleaning & Surface Preparation Equipment Specialists (866) 662-6710
  • Questions? Call us at (866) 812-6252

    With the Clarke CA30 ™ 17E, you can experience the agility of a 17 inch wide cleaning path and the added convenience of a 65 foot safety yellow power cord to improve your cleaning productivity. Engineered for heavy daily use in a variety of commercial applications, the CA30 17E features a heavy-duty cast aluminum assembly housing a rounded squeegee that delivers quick, complete solution pick-up day in and day out.
    • Easy-to-use fingertip controls
    • Low profile design for cleaning tight, hard-to-reach areas
    • Rounded squeegee for easy and complete solution pick-up
    • Long, 65 foot safety yellow power cord for non-stop cleaning
  • Advance SC250 Walk Behind Scrubber

    $3,294.00$3,659.00

    Questions? Call us at (866) 812-6252

    Efficient Cleaning in a Compact Design The battery-powered SC250™ walk-behind micro scrubber delivers cleaning performance in a compact size. Designed for fast and effective single pass hard floor cleaning in shops, schools, restaurants, cafes, bakeries, fast food chains, hotels and more. Benefits of SC250 Walk-Behind Floor Scrubbers The SC250 is an effective, easy-to-use, maneuverable floor scrubber ideal for cleaning in tight corners or under tables and chairs. Ensure a clean, dry, more hygienic environment and reduce slip-and-fall accidents by sweeping, scrubbing and drying at the same time, and picking up water in forward and reverse. Simplify operation with the user-friendly control panel and innovative handle-activated scrubbing action Minimize the need for pre-sweeping by easily raising the front squeegee to sweep up small debris Optimize cleaning time (up to 40 minutes of run time) with the powerful 36 V Lithium battery, and provide a safer cleaning environment thanks to the cordless design Clean during the day or in noise-sensitive areas thanks to the low sounds levels (66 dB A) Easily transport and store with the adjustable and foldable handle
  • Questions? Call us at (866) 812-6252

    Dump your mops and buckets! Everyday floor scrubbing and cleanups just got easier and more hygienic. With the compact, battery-powered Clarke® MA30™ 13B Micro Scrubber, you can quickly clean up small messes—or scrub entire areas—without messy mops and buckets. In just one pass, the Clarke MA30 13B sweeps, scrubs and dries, removing dirt and small debris quickly and leaving your floors clean, dry and more hygienic. Effective. Compact. Sanitary. To operate the Clarke MA30, simply place your hands on the innovative handle touch points and engage the scrubbing action—the control panel is built right in to the handle. To increase water flow for tougher cleaning areas, simply toggle the two solution control settings. That’s it! And the Clarke MA30 Scrubber is as easy to put away as it is to use, with a compact footprint and innovative fold-over handle. The result? Fast, effective cleaning + maximum productivity. So you can quickly finish your floors and get on with your day. Compact scrubber cleans under tables and chairs and into tight corners Innovative scrubber technology picks up water in both forward and backward directions, ensuring a cleaner, more hygienic environment and less chance of slip-and-falls Powerful, 36-Volt lithium battery provides up to 40 minutes of run time Cordless power ensures safer, easier cleaning Lightweight, tank-in-tank design makes emptying and refilling easy Adjustable, fold-over handle with touch sensors simplifies both operation and transport Wide range of accessories allow cleaning of almost any environment.
  • Questions? Call us at (866) 812-6252

      The Cimex Carpet Machine sets the industry standard for low moisture carpet encapsulation cleaning. This method of shampooing uses a polymer solution that encases or “encapsulates” the dirt particles. The low moisture aspect of this approach means that it uses very little water compared to the more common hot water extraction technique. As such, you can feel good about reducing waste water and ultimately operating cost. That being said, the main reason to use this machine is the science behind the encapsulation process itself. A frequent problem with regular carpet cleaning is that extractors use a soapy detergent that leaves behind a sticky residue. New dirt particles cling to this residue left on the carpet fibers, thus causing re-soiling. The encapsulation process creates a hard crystal shell around the dirt. Said dirt is then completely removed by vacuuming. Afterwards, the dust bags are neatly discarded. This stands in stark contrast to the dumping of many gallons of dirty water.
  • Questions? Call us at (866) 812-6252

    The AS380/15 is a compact and user-friendly micro scrubber/dryer perfect for cleaning in narrow areas. Perfect for daily indoor scrubbing and drying in light to medium duty areas such as offices, hotels, hospitals, schools, smaller supermarkets and other retail outlets. With this compact micro scrubber/dryer you can easily clean the floors in narrow areas. The AS380/15 is easy to use and with handles on the side of the water tank makes it highly user-friendly. The foldable handles makes it easy to transport and storage the machine. Extremely compact machine that makes it easy to maneuver and transport.
    • Ergonomic, adjustable and foldable handle
    • Extremely compact
    • Easy to maneuver, transport and storage
    • Easy to use and service
    • Easy to clean, refill and empty
    • Suitable for application in narrow area
    • Rotationally molded tank
    • Robust handle lock
    • Two tanks system
    • Battery and Cable versions EU and UK versions.
  • Questions? Call us at (866) 812-6252

    The Kärcher BDS 43/Duo C is an all-surface cleaning, scrubbing, sanding, polishing, extraction and grinding floor machine. The patented dual-action Orb Technology gives the BDS 43/Duo C the versatility to clean multiple floor surfaces. Ideal for hard floor areas up to 7,500 square feet per hour and 3,000 square feet per hour of carpeted surfaces. This is truly an all-surface floor machine. Unlike traditional machines, the Kärcher BDS 43/Duo C generates thousands of 3/8” orbital contacts points that spin at 1725 rpms, while at the same time spinning at 80 RPM. The patented Orb Technology is a superior orbital mechanics system. It allows the machine to be more versatile and work on eight different floor surfaces.  
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Designed specifically for professional wood floor sanding contractors, the AVAC 26 dust containment system is the perfect mix of power and performance. Its compact design makes it highly portable, and yet it still boasts a large 26 gallon capacity tank with superior filtration capabilities. Its high suction, high filtration, and ease of transport make it the vacuum of choice in the wood floor sanding market. Features:
    • Dual 2” vacuum ports collect dust from multiple sanding machines.
    • Clear polycarbonate lid makes it easy to monitor the tank capacity.
    • 50 foot detachable power cord.
    • 26 gallon canister.
    • Convenient handle for lifting.
    • Non-marking, heavy duty casters.
    • Three 800 watt, dual stage motors which run independently of each other.
    • Uses reusable and disposable filters to capture sanding dust.
    • High performance filtration. (H.E.P.A. filter is also available as an option)
  • Questions? Call us at (866) 812-6252

    The Fast Clean SS WSC21 is a nimble battery operated floor scrubber suitable for small and medium areas. Its compact, flexible and easy to learn controls combine with a spacious water tank and extensive battery life – helping you complete a variety of cleaning jobs.
    Voltage: 24 v (two 12 v batteries, 120 ah) Continuous Run Time: 4 hrs
    Cleaning Path: 21″ Weight: 428 lbs
    Brush Motors: 0.87 hp (650 w) Tank Coverage: 22,600 ft²/hr @ 2.5 mph
    Solution Tank: 13.2 gal Recovery Tank: 14.5 gal
    Vacuum Motor: 0.67 hp (500 w) Dimensions: 46″l x 21″w x 42″h
    Squeegee Width: 30″ Warranty: 3 years parts, 1 year labor, 12 months prorated batteries
  • Questions? Call us at (866) 812-6252

    A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine. VERSATILE • Strip, deep scrub, and scrub • 2.5 gal. (9,5 liter) solution tank PRODUCTIVE • 120V 1 HP totally enclosed motor • 12” x 18” (30,5 cm x 45,8 cm) pad size • 3,600orbits per minute • 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug USER FRIENDLY OPERATION • Adjustable, anti-fatigue soft-touch handle • Dual lever on/off safety switch for left or right hand operation • Large, non-marking, transport wheels
  • Questions? Call us at (866) 812-6252

    The New Method

    Apply chemical at a high level, let ProWash do the scrubbing while gravity pulls down the chemical, gently move ProWash from side to side and easily rinse with on demand fresh water. The cleaning results from 360rpm are incredible making light work of heavily soiled surfaces. ProWash is excellent for cleaning vinyl siding, cladding, guttering, commercial signage, trucks, trains, planes, boats and any large vehicle. For an all-in-one professional cleaning system, ProWash is the only choice.

    Key Benefits
    • 4 x faster scrubbing than manual methods.

    • Capable of spraying chemical where other systems use only pure water. In many cases, this is not suitable and chemical is a must. 

    • Save chemical cost by setting your percentage and only spraying when needed. 

    • 360rpm drastically cuts exhaustive manual labour. 

    • Achieve like new results.

    • Users love MotorScrubber making cleaning enjoyable.

    • Very simple to use, no need to learn complicated controls. Plug and go! 

    • 100%* waterproof and rust proof 

  • Questions? Call us at (866) 812-6252

    Consistent, High-Performance Floor Polishing Advolution™ 20 & 20XP corded electric floor burnishers are designed to maximize performance, productivity and ease-of-use. With a 20” burnishing surface and our unique Flex Floor™ Technology for reliable polishing results. Benefits of Advolution 20 & 20 XP Corded Electric Burnishers The Advolution 20 & 20XP features our unique Flex Floor Technology that enables the motor to pivot and hug the contours of the floor’s surface. Combined with our patented gas spring technology that regulates head pressure for maximum shine (regardless of operator experience), you’ll get a high-quality, consistent gloss, every time.
    • Choose the right burnisher for your job — Advolution 20 with 20” burnishing surface running at 1,500 RPM, or 20XP 20” dust control model that runs at 2,000 RPM
    • Work during the day thanks to the low sound levels of 67 dB A (the volume of standard conversation)
    • Improve safety and efficiency with the 75 ft. SuperFlex™ cord with quick-release hook, hospital-grade plug and SafeStart™ function
    • Minimize storage space, and easily access the burnishing pad, thanks to EZ Store™ construction
    • Expedite service with carbon brush replacement indicator light, electrically detachable motor, easy-access dust bag and maintenance-free transmission and direct drive motors
  • Questions? Call us at (866) 812-6252

    The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
    • DL2000 Dust Collector, 115 V
    SAFETY
    • Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    • Heavy-duty, anti-static collection hose provides durability and safety
    PERFORMANCE
    • Primary filter
    • State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
  • Questions? Call us at (866) 812-6252

    Highly productive, highly affordable Floor scrubbing doesn’t get much easier—or more affordable—than using the Clarke® MA50™ 15B Walk-Behind Floor Scrubber. Simple. Rugged. Affordable. Featuring a 15-inch scrubbing path, an onboard battery that runs up to 2 hours, and a highly efficient, curved squeegee, the Clarke MA50 15B Scrubber can clean up to 8,000 square feet per hour. It just might be the best value in the floor-scrubbing category—ideal for classrooms, offices, bathrooms and much more!
    • Fingertip controls are easy and intuitive to use
    • Low-profile design cleans even tight, hard-to-reach spaces
    • Onboard battery charger and auxiliary cable allow “away from home” charging
    • Innovative, rounded squeegee helps ensure one-pass solution pickup
    • Fold-down handle simplifies storage and transport
    • 3.5-gallon cleaning solution and recovery tanks maximize scrubbing runs
    • Lift-off recovery tank simplifies dumping
  • Questions? Call us at (866) 812-6252

    Cimex Machine Includes: 1 Box of Pads Qty 15 1 Quart of Strike Out Spotter 1 Quart of Odor Zyme 4 Gallons of Crystallizing Cleaner The Cimex Carpet Machine sets the industry standard for low moisture carpet encapsulation cleaning. This method of shampooing uses a polymer solution that encases or “encapsulates” the dirt particles. The low moisture aspect of this approach means that it uses very little water compared to the more common hot water extraction technique. As such, you can feel good about reducing waste water and ultimately operating cost. That being said, the main reason to use this machine is the science behind the encapsulation process itself. A frequent problem with regular carpet cleaning is that extractors use a soapy detergent that leaves behind a sticky residue. New dirt particles cling to this residue left on the carpet fibers, thus causing re-soiling. The encapsulation process creates a hard crystal shell around the dirt. Said dirt is then completely removed by vacuuming. Afterwards, the dust bags are neatly discarded. This stands in stark contrast to the dumping of many gallons of dirty water.
  • Questions? Call us at (866) 812-6252

    Easily converts from cart to skid. Corrosion-resistant and light-weight, Mako Shark Series HD aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Honda powered pressure washers offer a bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Honda GX engine Belt or direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated. Weldless, corrosion resistant aluminum frame Modular design - converts easily from cart to skid Stainless steel nozzles U-Seal technology  
  • Questions? Call us at (866) 812-6252

    The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.
    • Resurfaces hundreds of sq ft per hour
    • Compatible with EDCO Vortex 200 Vacuum for dust-free working
    • At only 90lbs it fits inside car trunks when the handlebar is collapsed
    • Accepts EDCO Magna-Trap® Slide-On Tooling
  • Daily

    $70

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $220

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $660

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus, Toledo Ohio & Rockledge Florida Locations. The Rockledge Florida branch serves the Greater Orlando area. Limited delivery options are available. Please contact us for more information.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-Sand orbital floor sander features a powerful three-motor, triple-head design that allows it to effectively sand large, open areas. At the same time, the compact design makes it easy to sand edges, wall lines and closets. Its modular design allows the handle to quickly separate from the base of the machine, making it incredibly easy to transport to and from any home or job-site. The EZ-Sand is equipped with a self-contained dust collection system or it may be attached to an external dust containment system. Features:
    • Safety interlock prevents accidental starts.
    • U-Joint style handle base for easy maneuverability.
    • Rugged 1.5 inch steel handle tube is chrome plated to prevent corrosion.
    • Rear mounted dust bag for excellent visibility.
    • Lifting handle for easy transport.
    • Die-cast aluminum handle with molded on rubber grips for durability and comfort.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Husqvarna's CG 200 is a highly productive scarifier, designed to remove concrete fast and aggressively. Applications include removing coatings (heavy floor tile mastics and epoxy materials), light or heavy milling, grooving and texturing of walkways to make them slip resistant, removing trip hazards, and levelling misaligned concrete joints and uneven surfaces.
  • Questions? Call us at (866) 812-6252

    The Puzzi 30/4 spray extraction cleaner is the economical cleaning solution for large carpet surfaces and makes cleaning ergonomic, stress-free and quick. With a noise level of 66 dB(A), the Puzzi 30/4 spray extraction cleaner is the quietest wet vacuum cleaner in its class and ideal for low-noise cleaning. With an 8 gallon fresh water capacity and a 14" floor nozzle, this innovative spray extraction cleaner is especially suitable for cleaning large carpet areas. The machine design focuses on ergonomic, stress-free and time-saving cleaning. The EASY Operation concept and the ergonomic upright stance make handling much easier. The learning curve is short thanks to easily understandable pictograms. The dirty water tank is removable, and the handle and shape of the tank are designed for ergonomic carrying. The tank is easy to clean, which also makes it suitable for filling the fresh water tank. The short setup period saves time and money. The drying time with this machine is up to 30% shorter than with competitive products. This is partiallydue to the flexible suction lip, which always assures an optimal suction angle. The Puzzi 30/4 is easy to carry, even when lying flat with a full fresh water tank, and its large castor wheels make it easy to transport over stairs.  
  • Questions? Call us at (866) 812-6252

    Clarke is carrying on their long tradition of durable, user-friendly extractors with the introduction of the EX40™ 16ST and 18LX self-contained extractors. These CRI certified cleaning machines are proven to very effectively remove soil from your carpets, improving indoor air quality and extending the life of your carpets. As cleaning professionals have come to expect, these Clarke machines are also compact, extremely versatile and easy to operate. Plus, with One-Touch™ control cleaning your carpets is as simple as switching on and selecting your cleaning mode.
    • Increased capacity 9 or 12 gallon water tank
    • Ergonomic handle for improved control
    • High-contact floating brush head
    • Easy access front-mounted drain hose
    • Optional integrated hand tool for spot-cleaning
    • Self-aligning vacuum shoe provides improved suction
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The random-orbital sanding action of the OBS-18 and OBS-18DC removes the scratch patterns left by drum or rotary sanders, leaving a smooth, flat floor ready for refinishing. At 3,600 orbits per minute, the OBS-18 sands faster than any other orbital sander available. With torque-less operation for enhanced operator comfort, the OBS-18 and OBS-18DC are perfect for interim “screen and recoat” and fine finish sanding jobs. Features:
    • The totally enclosed, fan cooled motor, eliminates overheating and the need for motor cleaning.
    • Heavy duty cast aluminum main frame and pad driver plate for added strength.
    • Independent dust pickup fan for effective dust containment (DC model only).
    • Dust pipe allows for easy attachment of 1-1/2 or 2 inch vacuum hoses for improved dust containment.
    • Bristle dust skirt to aid in dust containment (not shown).
    • Transparent molded plug has an internal light that serves as a power indicator (not shown).
  • Questions? Call us at (866) 812-6252

    The Kärcher HDS 1.7/12 U Ed is an entry-level upright hot water pressure washer designed for the professional market. Powerful, robust and incredibly maneuverable, this unit is compact, light, and easy to transport. The HDS upright features a holding clip for the spray lance, power cord storage, nozzle compartment, accessory storage and tank lock, and includes support points for horizontal transport and a step trough for tipping the unit. Includes an integrated detergent injector, adjustable push handles and easy-to-fill tanks for operator convenience. Features This high-performance, robust upright machine offers outstanding maneuverability, easy transport and intuitive operation. Ideal for tradesmen, commercial use and contract cleaners. * Effortless transport over landings or stairs and space saving storage * Large, flat-free tires for unpaved surfaces * Large fine mesh filter reliably protects against dirt particle damage * Easy! Force gun with cruise control like technology - uses its own recoil force to hold the trigger down — so no more sore hands after hours of use
  • Questions? Call us at (866) 812-6252

    The SG-8 is our compact and robust surface grinder with a fixed grinding head allowing for a fast and easy transition to edge grinding. To help facilitate consistent passes and even tool wear, the SG-8 comes equipped with our floating tool driver. The tool driver along with the preset wheel position settings result in extremely smooth operation. Lastly, the 2-position handle provides an ergonomic position and an easy way to transport and store the unit. All of these features are complemented by our powder-coated ¼” steel frame to provide durability, longevity, and reduce harsh vibrations. Proudly made in the USA.

    Features

    Excellent dust control                                                                 Self-leveling head

    Fixed head for edge grinding                                                     3-segment floating head taper lock system

    3-point hold down                                                                       Built-in transport handles

    Built-in tool storage                                                                    Wrench holder

    2″ dust port

     
  • Questions? Call us at (866) 812-6252

    For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding, and coating removal. RELIABLE PERFORMANCE • 1.5 HP, 2 speed, high torque motor • Driver speed 175 or 300 rpm • Strong triple planetary gearbox • Rugged, all metal construction • Non-conductive, commercial grade switch housing SUPERIOR PRODUCTIVITY • 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr) • 2.5 gal. (9,5 liter) no-spill solution tank • Dust containment port for dry applications • Splash/dust skirt for wet applications • HydraShine diamond driver uses a passive planetary system for a superior polish
  • Questions? Call us at (866) 812-6252

    • Three-position articulating frame adjustment for left angle, right angle or straight position grinding
    • Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
    • Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
    • Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
    • Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
    • Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
    • New & improved tapered roller bearings provide less maintenance and longer life
  • Questions? Call us at (866) 812-6252

    Built for heavy-duty industrial purposes, the X-Scrub Pro gets the job done. See why you need our floor scrubber in your arsenal.

    WHY THE X-SCRUB PRO?

    The X-Scrub Pro can clean virtually any hard surface found in industrial settings. No matter the mess, dirt, or grime, this powerful floor cleaner can handle demanding situations that mops can only dream of addressing. Our dual brush, folding, 360-degree swivel micro floor scrubber is ideal for manufacturing, education, commercial buildings, BSCs, airports, restaurants, and other industrial settings. It deposits clean water every time and can be used with various interchangeable brushes:
    • Soft brushes for finished floors.
    • Aggressive brushes for restorations.
    • Daily brushes for everyday clean-up jobs.
  • Questions? Call us at (866) 812-6252

    Unit is backorded Designed for large carpeted areas, the CarpeTriever™ 28 thoroughly vacuums a 28-inch (71 cm) path in one pass. No need for repetitious back and forth movement. For Sale, The CarpeTriever™ maneuvers easily around obstacles. Its motorized carpet brush helps propel the machine, minimizing operator fatigue, and it adjusts to any carpet pile. The chevron bristle pattern draws dirt to the vacuum intake for efficient cleaning. A 1/3 hp brush motor drives the carpet brush at 1,300 rpm for effective dirt and debris recovery. Squeeze-grip controls turn the brush on and off. The dual 1-1⁄8 hp vacuum motors provide generous pick-up power for thorough cleaning. Both motors are protected from dust by secondary filters, which remove easily for cleaning and inspection. An optional Microstat® filtration kit provides 99.94% effective filtration of 0.3 micron particles. The standard cloth filter and collector bag on the CarpeTriever™ is big, holding over 1 bushel (39.5 L), and yielding more productive cleaning time. Paper bags are also available, and a hinged access door gives easy access to change or empty the bag. Simple fingertip controls make operation easy, and a built-in hose and wand on the CarpeTriever™ adds convenience for off-the-floor cleaning.
    • Dual 1-1⁄8 hp vacuum motors are protected by secondary dust filters, with easy access for cleaning and service
    • Sealed bag compartment confines dust, while hinged door makes changing the collector bag simple
    • Convenient control knob switches vacuum air flow from floor to wand for off-floor cleaning
    • Eight-position adjustment sets the carpet brush height for any carpet pile
    • Effortless maneuverability provided by large 8-inch (20 cm) rear wheels and twin 2-inch (5 cm) casters
    • Tough, rotomolded polyethylene housing has 10-year warranty
  • Questions? Call us at (866) 812-6252

    For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
  • Questions? Call us at (866) 812-6252

    The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
    • Rigid, compact design
    • Quick Lift – Pulls Cutters In/Out of Cut
    • 50mm dust extraction port Dust free when operated with a suitable vacuum
    • Large diameter wheels for excellent mobility and stability
    • Welded construction is rigid, strong and lower control
    • Fine Adjust- Screw type raise and lower control
    • Firm engine mounting plate
    • Front wheels protected from debris
    • Height adjustment at the handle
  • Questions? Call us at (866) 812-6252

    The VIPER AS4335C and AS4325 are walk-behind microscrubbers built to simplify daily medium-scale floorcare with easy operation, reliable performance, and reduced resourceconsumption. The cable-powered AS4335C and batterypowered AS4325 both offer fast, high-efficiency cleaning with wide brush decks, large tank capacities for the micro-scrubber class, and features that help keep resource costs to a minimum. Both are excellent solutions for maintaining cleanliness standards in retail, hospitality, and schools, providing excellent results across various common surface types with minimal training and maintenance. Key features include: • Eco Mode optimizes use of water and detergent to extend runtime and increase productivity (battery version) • Silent Mode allows for cleaning in sound-sensitive areas, or during daytime (battery version) • Ergonomic handle reduces operator fatigue and can adjust to different operators; also reduces space requirements for transport, storage, and operation • Safety switches make it easy to control brush start and stop • Intuitive dashboard-based control of all functions for both models
  • Questions? Call us at (866) 812-6252

    Unit sold as is and is not in working condition. Great for parts or a refurbishing project. For additional details please contact us. We have hundreds of commercial cleaning  and surface preparation equipment cores available at any of our four Ohio locations located in Akron, Cleveland, Toledo and Columbus. These units come from several sources such as local trade ins and out of our short or long-term rental fleet.
       
  • Questions? Call us at (866) 812-6252

    The Dirty Escalator Solution.

    The Cimex Escalator Cleaner provides a simple solution to the problem of dirty escalators by quickly and efficiently cleaning the treads. The machine can utilize two different brush sets; The Tynex Brush for aggressive sweeping or the Nylon Brush for routine maintenance. Thorough cleaning of the treads is achieved by dual powered 290 rpm twin brushes which loosen dirt and grit. The grimy residue is then instantly removed by the Escalator Cleaners dual vacuum motors, leaving the escalator working at peak performance and keeping surfaces clean and sanitary. A well maintained escalator or moving walkway helps to not only to improve overall appearance but reduce service costs as well. The quick-change disposable bag system is fast and easy, providing an eco-friendly disposal option.
  • Questions? Call us at (866) 812-6252

    For Sale. With the introduction of the ES300™ and ES400™ self contained extractors, Advance has entered a new era of carpet cleaning. Built on the industry leading AquaClean® platform, these multi-purpose machines are ideal for cleaning your high-traffic carpeted areas. Featuring LIFT ™ as well as our Dual Cleaning Mode technologies, the ES300™ XP and ES400™ XLP allow you to perform deep cleaning or interim cleaning with super-quick dry times. With the Carpet and Rug Institute Seal of Approval, you can be certain that these machines not only thoroughly remove dirt and water, but also meet the highest standards in the industry to help extend the life of your carpets.
    • 1.5 hp, 3-stage vacuum motor, 120 inch waterlift
    • LIFT™ Technology for low-moisture cleaning
    • Deep Treat™ cleaning for pre-spray and post cleaning treatment.
    • Adjustable handle for maneuverability in tight spaces
  • Questions? Call us at (866) 812-6252

    The Kärcher SG1 Bp is a lighter weight version of the SG2. Safe to use on stone, concrete and even carpet. Great for maintaining sidewalks, schools, and retail locations. Turn up the heat on removing gum once and for all. Features a 1-year warranty and long-life lithium battery for extending working times. Vaporize gum in seconds: Biodegradable vegetable extract heats up debonding agents disolving gum without residue or mess. Low pressure fuel canisters are designed to ensure the delivery of proper fuel volume and safe operation. Ultimate portability: No cords or water required. The long-life lithium battery pack provides cleaning power for up to 4 hours. Lighter weight than many conventional battery back pack systems.
  • Viper AS5160 Walk Behind Scrubber

    $4,125.00$4,960.00

    Questions? Call us at (866) 812-6252

    The Viper AS5160 is a highly productive walk-behind scrubber dryer with high battery endurance and tank capacity to clean for hours. Being easy and comfortable to use with their ergonomic design, these robust machines are ready for an in-depth performance on indoor surfaces. Ideal for cleaning in hotels and restaurants, bus and train stations, factories, supermarkets, shopping malls, hospitals, schools, and other institutions. With a working width of 51 cm and a powerful 450 W brush motor, these machines will get the job done with both speed and ease. Especially if you go for the model AS5160 T – for Traction – equipped with a 150 W drive motor bringing the scrubber dryer forward. The machines are well-balanced and easy to maneuver thanks to their big wheels and strong casters. Hour meter and water level indicator will keep you updated, and the speed reducing gear drive system of the Traction version ensure smooth operation with a minimum of effort. For intensive cleaning or maintaining large coated floor areas the AS5160TO with orbital scrub deck ensures multidirectional cleaning performance with low solution and detergent consumption and the square deck gives easy to access corners.
    • Orbital version saving water and detergent equipped with traction motor and automatic raise and lowering of the scrub deck
    • AS5160T - Traction-model: 150W drive motor
    • Easy to maneuver and transport: Big wheels and strong caters, making the machine well-balanced
    • Easy and convenient operation: 2 pcs safety switches
    • Control panel with intuitive display and buttons
    • Productive: Working width 51 cm
    • Brush and pad driver can be installed/un-installed automatically
    • Hour meter: Check how many hours the machine has been running
    • Water level indicator with volume visible on the tank
    • High capacity for increased productivity: 61-liter water tank/ 61-liter recovery tank
    • Robust and solid: Steady chassis system and rotationally molded tanks
    • Reliable: Heavy duty 79 cm aluminum squeegee
    • Accessories: Brush, pad holder, batteries 12V x2 and onboard charger
    • Optional brush skirt kit prevents the machine from splashing water splashing water
  • Questions? Call us at (866) 812-6252

    230V/3.6KW TS3000 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.
  • Questions? Call us at (866) 812-6252

    110V/2.4KW TS3100 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.
  • Questions? Call us at (866) 812-6252

    The AS430/510 are a simple to use medium-sized walk-behind scrubber dryers. The perfect solution for scrubbing and drying in mid-sized and heavy-traffic areas. Suitable for cleaning in middle sized areas of hotels, restaurants, schools, shopping malls and other retail outlets, as well as hospitals and metro/train stations.
    • Easy to use: Both the built in charger, reduced pushing force and ergonomic start/stop switch gives the user a better handling of the product
    • Simple and user-friendly: The solution and recovery tank is integrated into one mold to create higher tank capacity
    • Great value for money: Available in both cable and battery version to give the customer the flexibility to choose the best way to cover their cleaning needs
  • Questions? Call us at (866) 812-6252

    Kärcher’s cold water, Dual Mister Cart easily converts from a pressure washer to a mister for dispensing sanitizer or disinfectants, such as Vital Oxide®.1 This reliable electric powered pressure washer comes standard with a humidifying nozzle and an Easy!Valve that allows the operator to easily switch from pressure washing to misting mode. It comes on an easy-to-maneuver cart with flat-free tires, two mounted hose reels, and provides a bypass loop for additional pump protection. In short, this unit is designed to combat viruses and bacteria in misting mode, or it can be used as a high pressure washer to clean surfaces.
  • Out of stock

    Questions? Call us at (866) 812-6252

    Advance’s rugged, low-maintenance SC750 & SC800 walk behind scrubbers deliver incredible value on a walk-behind platform. High productivity per tankful allows for 84 minutes of continuous scrubbing, which reduces dump/refill cycles & helps provide fast ROI. We have a large selection of used cleaning machines & surface preparation equipment including: trade-ins, off-lease, & great condition pre-owned machines for you to choose from. Our quality pre-owned equipment is guaranteed ready to use. Our factory-trained technicians carefully inspect all equipment & replace worn parts to restore every machine to excellent working condition. Includes 30 day part warranty.
  • Questions? Call us at (866) 812-6252

    MODELS: CPL-8E, CPL-8G
    • 8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
    • 8-Inch, 6-Shaft drum accepts carbide and steel cutters
    • Etch the surface for new coatings
    • Available in 1.5HP Electric or 5.5HP Gasoline
    • Comes standard with universal vacuum port hookup
    • Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD is a 230V dual speed, multi-purpose machine with the muscle to handle the toughest floor jobs. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:
    • 230V, 2.5HP motor for loads of low-end torque without overloading household circuits.
    • Dual speed capability for use with various grits, wood types, and job site conditions.
    • Removable weight bracket to provide better access to tight spaces.
    • Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.
    • Bright, flexible LED light (with replaceable bulb) for improved visibility.
    • Heavy duty 6” wheels for added stability.
    • Exclusive tilt-back wheel system protects pad drivers from damage.
    • Dust control ready.
    • Durable rigid, low profile skirt contains dust and allows close access to wall lines
  • Questions? Call us at (866) 812-6252

    Versatility in a portable extractor.

    Take control of your dirty floors with this deep-cleaning portable extractor. The Puzzi™ 50/35 C and Puzzi™ 50/14 E provide deep cleaning power and versatility in easy to transport machine. It features a user-friendly design that makes training easy and also increases productivity. Functional and powerful Adjustable 0-500 psi spray pressure provides versatility to clean delicate upholstery and the power to clean the dirtiest carpet. Wide open accessibility to service components for easy maintenance and cleaning. All controls are conveniently positioned in one easy-to-reach location.
  • Questions? Call us at (866) 812-6252

    Features
    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • Questions? Call us at (866) 812-6252

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas.
  • Out of stock

    Husqvarna S 36 Dust Extractor

    $4,769.56$5,039.60

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes.
  • Questions? Call us at (866) 812-6252

    The Vantage 14’s easily-accessible, removable 3 gallon recovery tank and 2.5 gallon solution tank can be quickly filled, drained and cleaned away from the machine, ensuring less mess and minimal equipment maintenance. All machine components are accessible without the need for tools—including the squeegee, which features simple, one hand removal. When you’re done, simply fold the handle and transport the Vantage 14 to storage. Never skip those hard-to-reach areas again. The Vantage 14’s integrated rotating deck enables complete scrubbing in both forward and backward directions, allowing operators to easily clean under and around obstacles. Simply push the machine forward; then when needed, easily flip the machine up to allow the deck to quickly rotate for reverse scrubbing operation. With fast and easy scrubbing and water pick-up in all directions, the Vantage 14 leaves a clean, dry surface to boost your facility’s appearance. Employing brush-assisted operation, the Vantage 14 does the hard pushing for you, requiring significantly less physical labor. Adjustable water flow allows you to quickly switch between high or low flow settings, making it easy to tackle the job at hand. Say goodbye to annoying cords and limited scrubbing time and maximize your productivity with the Vantage 14’s fully-accessible, maintenance-free battery, which provides up to 100 minutes of scrubbing on a single charge. An onboard battery charger allows operators to charge the machine in any electrical outlet.
    • Patented, rotating deck enables complete scrubbing in both forward and backward directions
    • Full battery-powered operation and onboard battery charger minimizes downtime and guarantees continuous scrubbing performance
    • Compact, maneuverable design allows cleaning in areas with limited space
    • Quiet operation, at only 64 dB A, makes daytime cleaning possible
    • Brush-assisted operation minimizes required physical labor, allowing operators to scrub longer
Go to Top