Rogue is the newest Walk-behind Scraper from National. This all-electric scraper has an infinitely adjustable blade angle and powers through both hard and soft goods removal. Simplified toggle controls, increased travel speed, and fewer loose parts are a few of the features that set this machine apart. Designed as a solution for the global surface prep market, Rogue works in any country with the simple swap of a cord.
A non-acid cleaner and disinfectant for use in a wide range of facilities: schools, hospitals, nursing homes;
anywhere where infection prevention is of prime importance
DISINFECTION, DEODORIZING AND CLEANING
Remove gross filth or heavy soil prior to application of the product. Hold container six to eight inches from
surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and the
surface to remain wet for 3 minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1
minute and for HBV and HCV 5 minutes). No scrubbing is necessary. Wipe off with a clean cloth, mop or
sponge. The product will not leave grit or soap scum.
One-step cleaning and disinfection of toilet bowls and urinals:
Remove water from bowl by forcing water over trap with a swab mop applicator. Press swab mop against
side of the bowl to remove excess water from applicator. Apply 1 to 2 ounces of this product evenly,
allowing sufficient time for product to cover entire surface of bowl for maximum cleaning. Swab
bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 3
minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1 minute and for HBV and HCV 5
minutes) and flush.
Remediation, air scrubbing, restoration, healthcare, and clean rooms are only a few applications for the new Novair 700 portable air filtration unit. Available in a variety of power sources (115v-220v 50/60Hz) and filter configurations.• More power: The Novair 700 is the most powerful impeller driven variable speed adjustment, is capable of delivering 200-700 CFM and dramatically increases filter life.
• Versatility: The Novair 700 portable air filtration is at home in applications ranging from asbestos removal, restoration projects, airborne pathogens and medical uses. The tri gasketing and HEPA filter sealing flange, guarantee leak proof operation. The quick release intake door accepts MERV, carbon, and standard dust filters. Integrated nesting allows for the stacking of multiple machines. The built-in GFCI outlet allows you to connect multiple equipment up to 15 amps.
• Virtually indestructible: The heavy duty roto molded polyethylene shell, is dent proof, leak proof and virtually indestructible.
• Standard filters: 16” x 16” x 3” high capacity HEPA filter is standard. No outrageously priced proprietary filters needed. These economical filters are readily available.
• Low power requirements: Drawing only 3 amps, the 700 can be daisy chained up to three units. The built in GFCI outlets allow for safe and effective operation. The Novair’s straight through design makes it ideal for virtually any application.
• Utilizes standard "Lay flat" or flex ducting: 10 to 12 inch vacuum ports allows for maximum airflow with little restriction.
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our smallest, most compact inline scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
12CS100 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's Inline Needle & Chisel Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Vibration Reduced scalers (VRS) offer similiar impact and functionality as our standard scalers but with dramatically reduced vibration levels providing more operator safety along with further comfort.
Features & Benefits
• small lightweight compact scalers
• 2200-3800 blows per minute gives maximum performance
• 2mm, 3mm Flat or 3mm chisel Tip Needles (Needle Scaler Models}
• 3/4", 1", 2", 3" heavy duty 1/2" square shank chisels (Chisel Scaler Models)
• Steel components offer durability and long-life
• Low air consumption allows for use on small, portable compressors
• Converts to either a chisel or needle scaler in seconds
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our smallest, most compact inline scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds12NS100 -Needle Scalers
• Equipped with 12pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
Novatek’s line of pneumatic & electric HEPA floor vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous and non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Applications
• High capacity cleanup
• Liquid pickup with optional wet/dry adapter
• Asbestos removal
• Use with dust-free power tool systems
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 15 gallon cold rolled steel finished exterior with epoxy coated interior
• 4 stages of filtration assures long HEPA life
• Individually tested and certified HEPA filters
• Front swivel casters, large rear wheels for easy transport
• Air filter/dryer standard (pneumatic models only)
• 25’ heavy duty power cord (electric models only)
• Includes 6' of crush proof 1.5" vacuum hose
• Optional wet/dry float
Novatek’s line of pneumatic & electric HEPA floor vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous and non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Applications
• High capacity cleanup
• Liquid pickup with optional wet/dry adapter
• Asbestos removal
• Use with dust-free power tool systems
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 15 gallon cold rolled steel finished exterior with epoxy coated interior
• 4 stages of filtration assures long HEPA life
• Individually tested and certified HEPA filters
• Front swivel casters, large rear wheels for easy transport
• Air filter/dryer standard (pneumatic models only)
• 25’ heavy duty power cord (electric models only)
• Includes 6' of crush proof 1.5" vacuum hose
• Optional wet/dry float
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS100 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact vibration reduced scaler
• Inline configuration allows for access of tight areas
• Steel components offer durability and long-life
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration.
• Operator safety and comfort
VRS019CS -Inline Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19NS100 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19NS100 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact vibration reduced scaler
• Inline configuration allows for access of tight areas
• Steel components offer durability and long-life
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration.
• Operator safety and comfort
VRS019NS -Inline Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Tool-less needle replacement for easy field replacement
• Dust collection shrouds available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's vacuum shrouded "VSE" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. Our VSE scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
19SVSE120 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 3000 blows per minute
• 2mm Optional Needle Holders available
• Lighter in weight for longer run times
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's shrouded vibration reduced "VRS" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. The VRS scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Vibration dampening technology
• Tool-less needle change out
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
28NSVSE110 -Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2200 blows per minute
• 2mm Optional Needle Holders available
• More power for faster production times
The 28PG Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 28PG VRS scalers are our most powerful pistol grip vibration scalers.These models significantly decreases the posibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact, pistol grip vibration reduced scaler
• Pistol grip configuration is ergonomic and comfortable
• Steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration
• Operator safety and comfort
VRS028NPG -Pistol Grip Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Tool-less needle replacement for easy field replacement
• Dust collection shrouds available
Novatek’s durable line of pneumatic & electric HEPA backpack vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous or non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s HEPA backpack vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 3.3 gallon stainless steel backpack recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac. in seconds
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only)
• Tool on/off valve attached to vacuum (pneumatic model only)
• Includes 6' of crush proof vacuum hose
Novatek’s durable line of pneumatic & electric HEPA backpack vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous or non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s HEPA backpack vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 3.3 gallon stainless steel backpack recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac. in seconds
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only)
• Tool on/off valve attached to vacuum (pneumatic model only)
• Includes 6' of crush proof vacuum hose
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0020 - Workhead Kit
• Workhead complete with all its accessories
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0021 - Workhead w/Roller Kit
• Workhead complete with all its accessories
• Workhead Roller Attachment
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
Novatek's "Ergo" ergonomic designed Long Reach has a unique "S" shape designed to reduce back strain. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials and much more with our chisel and scraper attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. To help save on backaches, try utilizing our ergonomically designed Python Long Reach.
Features & Benefits
• Curved steel configuration for added comfort
• Vibration reducing top handle standard
• Nylon shoulder strap for operator comfort and reducing operator fatigue
• Heavy-duty steel ball retainer
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device.
Features & Benefits
• Focused water stream reaches heights of 100ft. or more (30 meters or more)
• Corrosion resistant, solid stainless steel body
• Heavy-duty tripod provides a rugged and stable platform
• No moving parts to wear
• Swiveling head allows for simple operation
• Integrated “ball valve” for regulating jet stream and pressure
• Easy quick cam connections for easy and rapid connection of hoses
• Recognized anti-piracy device
The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device.
Features & Benefits
• Focused water stream reaches heights of 100ft. or more (30 meters or more)
• Corrosion resistant, solid stainless steel body
• Heavy-duty tripod provides a rugged and stable platform
• No moving parts to wear
• Swiveling head allows for simple operation
• Integrated “ball valve” for regulating jet stream and pressure
• Easy quick cam connections for easy and rapid connection of hoses
• Recognized anti-piracy device
The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal.
This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.
Features & Benefits
• 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle
• Ceramic coated heat panel provides long life and durability
• Computerized control systems guarantee precise and dependable operation
• 100% solid state electronics. No mechanical relays or solenoids
• Rapid heat up and cool down
• Powder coated aluminum is durable and light-weight
• Triple redundant safety features for operator safety
• Integrated temperature indicator allows for monitoring of panel base
• Operate on standard 220v, 50amp service eliminating external buck boosters”
• 12v DC controls allow for safe, cool operation and long life
• Case grounded for added safety
The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.
To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles.
Features
• 378 square inch footprint removes 2-12”x12” in one cycle
• Operates off of 110v - 20amp current
• Identical controller to the N1026
• Compact design allows easy access to tight spaces.
• Heavy duty and light-weight aluminum construction
The EcoStrip 100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs. and utilizing a 15 amp, 110volt grounded outlet makes this an all around winner.
The Ecostrip heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.
Features
• 196 square inch footprint removes 1 - 12”x12” in one cycle
• Operates on 110V -15amp current
• Safety sensor shuts down machine if left unattended
• Compact design allows easy access to tight including steps and closets
• The perfect compliment to the N378 and N1026 models
• Heavy duty and light-weight aluminum construction
The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Features
• True 1000 cubic feet per minute air movement with all filters in place.
• Powerful 1.00 Hp motor
• 110v 60Hz or 220v 50/60Hz
• Vertical configuration
• Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed motor
• “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.
Benefits
• Smooth, consistent air flow
• Power motor pulls particulate deeper into the media extending filter life
• Small footprint-Perfect for tighter areas
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Lightweight and virtually indestructible
• Easy to clean and decontaminate
The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Features
• True 1000 cubic feet per minute air movement with all filters in place.
• Powerful 1.00 Hp motor
• 110v 60Hz or 220v 50/60Hz
• Vertical configuration
• Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed motor
• “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.
Benefits
• Smooth, consistent air flow
• Power motor pulls particulate deeper into the media extending filter life
• Small footprint-Perfect for tighter areas
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Lightweight and virtually indestructible
• Easy to clean and decontaminate
The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Features
• True 1000 cubic feet per minute air movement with all filters in place.
• Powerful 1.00 Hp motor
• 110v 60Hz or 220v 50/60Hz
• Vertical configuration
• Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed motor
• “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.
Benefits
• Smooth, consistent air flow
• Power motor pulls particulate deeper into the media extending filter life
• Small footprint-Perfect for tighter areas
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Lightweight and virtually indestructible
• Easy to clean and decontaminate
The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Powerful-High Volume
• True 2000 cubic feet per minute with filters in place
• Powerful 2 HP motor, (the most powerful in it’s class)
• Horizontal Configuration
• Uses Standard 24x24x11.5 HEPA filters
• Utilizes HEPA filters or Nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed configuration
• Integrated molded carrying handles
• Caster nest for stacking
• Integrated rib for strapping
Benefits
• Move the same air with fewer machines
• Longer filter life. Motor pulls more particulate deeper in the filter
• Light and compact. Fits through standard doorways
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Light weight and virtually indestructible
• Easy to decontaminate or clean
The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Powerful-High Volume
• True 2000 cubic feet per minute with filters in place
• Powerful 2 HP motor, (the most powerful in it’s class)
• Horizontal Configuration
• Uses Standard 24x24x11.5 HEPA filters
• Utilizes HEPA filters or Nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed configuration
• Integrated molded carrying handles
• Caster nest for stacking
• Integrated rib for strapping
Benefits
• Move the same air with fewer machines
• Longer filter life. Motor pulls more particulate deeper in the filter
• Light and compact. Fits through standard doorways
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Light weight and virtually indestructible
• Easy to decontaminate or clean
The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern. Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
Powerful-High Volume
• True 2000 cubic feet per minute with filters in place
• Powerful 2 HP motor, (the most powerful in it’s class)
• Horizontal Configuration
• Uses Standard 24x24x11.5 HEPA filters
• Utilizes HEPA filters or Nuisance dust filters
• Polyethylene shell is seamless and dent proof
• 2 speed configuration
• Integrated molded carrying handles
• Caster nest for stacking
• Integrated rib for strapping
Benefits
• Move the same air with fewer machines
• Longer filter life. Motor pulls more particulate deeper in the filter
• Light and compact. Fits through standard doorways
• Replacement filters readily available
• Filters for hazardous material or nuisance dust
• Dent proof, leak proof polyethylene. Light weight and virtually indestructible
• Easy to decontaminate or clean
Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required.
Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Brush seal technology to extend piston life
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
For light duty scrubbing applications. Genuine OEM Nilfisk-Advance, brush or aftermarket version available. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
Genuine OEM Nilfisk-Advance, brush or aftermarket version available. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, main broom or aftermarket version available. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
American-Lincoln 7760
American-Lincoln 7765
Advance SC7765
Genuine OEM Nilfisk-Advance, side broom or aftermarket version available. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
American-Lincoln 7760
American-Lincoln 7765
Advance SC7765
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, brush. Jordan Power Cleaning Equipment offers fast shipping for select Nilfisk-Advance parts. If you need help determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Genuine OEM Nilfisk-Advance, filter. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
American-Lincoln 7765
Advance SC7765
Genuine OEM Nilfisk-Advance, filter. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
Advance Proterra Battery Rider Sweeper
Advance SW8000
Genuine OEM Nilfisk-Advance filter. Jordan Power Cleaning Equipment offers free shipping for select Nilfisk-Advance parts. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Prices valid for online orders only. In store prices may vary. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
American-Lincoln 7750
Genuine OEM Advance Paper Air Filter 1463523000. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Image is for demonstration purposes only. Actual product appearance may vary.
Compatible with the following models:
Advance Terra 4300B
For Sale, The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder.
The machine comes equipped with a padholder and is available with an optional solution tank.
For Sale
The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding,
and coating removal.
RELIABLE PERFORMANCE
• 1.5 HP, 2 speed, high torque motor
• Driver speed 175 or 300 rpm
• Strong triple planetary gearbox
• Rugged, all metal construction
• Non-conductive, commercial grade switch housing
SUPERIOR PRODUCTIVITY
• 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr)
• 2.5 gal. (9,5 liter) no-spill solution tank
• Dust containment port for dry applications
• Splash/dust skirt for wet applications
• HydraShine diamond driver uses a passive planetary system
for a superior polish
For Sale
The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
For Sale
The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder.
The machine comes equipped with a padholder and is available with an optional solution tank.
For Sale
The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine.
VERSATILE
• Strip, deep scrub, and scrub
• 2.5 gal. (9,5 liter) solution tank
PRODUCTIVE
• 120V 1 HP totally enclosed motor
• 12” x 18” (30,5 cm x 45,8 cm) pad size
• 3,600orbits per minute
• 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
USER FRIENDLY OPERATION
• Adjustable, anti-fatigue soft-touch handle
• Dual lever on/off safety switch for left or right hand operation
• Large, non-marking, transport wheels
