Surface Prep Equipment Archives

National 5625 Ride-On Scraper

$38,028.13 – $42,835.67

Questions? Call us at (866) 812-6252

Click here for the full National Flooring Equipment catalogue The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.

Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Larger/deepened forklift pockets
Nonmarking tires
Compact design fits through standard door frames and elevator doors
Improved exhaust system meets federal OSHA regulations
Front caster wheels allow increased maneuverability in tight spaces
12-volt LED light for increased visibility on the jobsite

Edco 20″ Walk Behind Saw – Downcut

$3,108.60 – $4,447.80

Questions? Call us at (866) 812-6252

Model: DS-20 BLADE NOT INCLUDED

20″ Blade Capacity
NEW & Improved throttle cable
Easy turn crank, for lowering and raising blades in and out of cut
Heavy-Duty Anti-Vibration engine mount!
Screw boot belt tensioner prevents frame damage
7-gauge steel blade guard with welded protective segment flap
Heavy-Duty lifting bail for easy loading and unloading
13 HP gasoline engine or 7.5 HP electric options
Heavy-Duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
Solid-Steel lifting handles
High quality molded rubber wheels

Edco 14″ Compact Saw – Downcut

$2,364.86

Questions? Call us at (866) 812-6252

MODEL: KL-14

14” Blade Capacity
Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
Heavy-Duty Box Frame Construction
Laser Fabricated Thick Steel Material
Easy-Use Hand Wheel Depth Control
Misting system for wet cutting
Thick steel blade guard for added safety
Easy access belts and bearings for fast maintenance
Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint

Edco Traffic Line Remover

$11,343.13

Questions? Call us at (866) 812-6252

MODEL: TLR-7

Remove traffic lines from asphalt – and get the job done quickly!

EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones. Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.

7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters

Edco 10″ Self Propelled Crete-Planer

$15,350.40 – $16,901.00

Questions? Call us at (866) 812-6252

MODELS: CPU-10FC-G, CPU-10-FC-E

10″ working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8″
Adjustable depth control up to 3/16″ working depth per pass
Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
Includes lifting bail, oil alert and hour meter
Optional outrigger axle enables the CPU-10(FC) to follow slab contours closely when working on uneven surfaces
Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes

Edco 10″ Walk-Behind Crete-Planer

$6,984.00 – $8,053.20

Questions? Call us at (866) 812-6252

Models: CPM-10G, CPM-10E

10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
1/4” steel frame
Heavy-duty, oversized bearings
Weighs 299 lbs. with cutters
Tethered emergency stop switch
Larger 6” wheels in the rear for easy handling
Gasoline or Electric models available
Vacuum port standard for dust-free cutting
6-Shaft and 8-Shaft easy change, side loading drums available
Tungsten carbide or steel cutters available

Edco 8″ Walk-Behind Scari-Lite Crete-Planer

$4,519.80

Questions? Call us at (866) 812-6252

MODELS: CPL-8E, CPL-8G

8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
8-Inch, 6-Shaft drum accepts carbide and steel cutters
Etch the surface for new coatings
Available in 1.5HP Electric or 5.5HP Gasoline
Comes standard with universal vacuum port hookup
Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane

Edco 8″ Walk-Behind Crete-Planer

$6,485.31 – $10,793.48

Questions? Call us at (866) 812-6252

MODELS: CPM-8G, CPM-8E

8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″
Removes traffic lines at 800-1,000 lineal ft. per hour
Power source over drum to eliminate vibration and maximize surface contact
Compact design
Front-mounted lifting handle makes loading and unloading easy
Vacuum port equipped

Diamatic BMG-780 UltraPro Floor Grinder

$18,995.00

Questions? Call us at (866) 812-6252

The BMG-780 ULTRAPRO is available in two power options, the 230Volt and the 480 Volt and is the ideal machine to prepare surfaces prior to new coatings, like removal of old coatings or adhesive residues, to smooth or flatten concrete slabs including curled expansion joints, or to just simply remove unsightly surface imperfections. For decorative concrete applications, it is an ideal system for polishing concrete to a high shine or restoring old slabs for newer architectural finishes. The floating shroud with brush skirt is an added feature for those types of processes.

Virtually dust free when connected to BDC-3140LP
3 head planetary design
Variable speed control
Ideal for large jobs such as malls, airports, hotels, schools, hospitals, and food preparation industries