Hand Tools Archives

Novatek 5 inch Electric Shrouded Grinder

$908.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 35 Needle Scaler Kit

$923.00

Questions? Call us at (866) 812-6252

The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our most powerful offset scaler • Powerful and light-weight • All steel components offer durability and long-life • 1800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 35CS100 -1/2" Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 7 inch Electric Shrouded Grinder

$935.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 5 inch Air Shrouded Grinder

$967.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 7 inch Air Shrouded Grinder

$993.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek Contained Blast Systems Workhead with Roller Kit

$1,093.00

Questions? Call us at (866) 812-6252

Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry. Features & Benefits • All steel body for maximum durability • Can be fitted to existing blasting equipment • Works off standard 3/4" blast hose • Utilizes standard blast nozzles • 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator • Replaceable front steel wear sleeves for increased workhead life • Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces • 3" blast pattern • Can be fitted to most existing blast equipment CBS0021 - Workhead w/Roller Kit • Workhead complete with all its accessories • Workhead Roller Attachment • 1 x #4 Blasting Nozzle • 2 x Internal Corner Brushes • 2 x External Corner Brushes • 2 x 2" Steel Wear Sleeves • 2 x 4" Steel Wear Sleeves
Novatek 28PG Vibration Reduced Needle Scaler Kit

$1,115.00

Questions? Call us at (866) 812-6252

Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 2200-3000 blows per minute gives maximum performance • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • Steel components offer durability and long-life • 2mm Flat & 3mm Flat or chisel Tip Needles available • Vibration dampening technology (VRS Models) • Tool-less needle change out (VRSModels) Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Works on irregular surfaces • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors

National 3435 5″ Hand Held Grinder

$1,392.94

Questions? Call us at (866) 812-6252

Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal SAFETY

Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud

COMFORT

Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue

PERFORMANCE

Accommodates multiple styles of diamond turbo cup wheels

National 3535 Corner Preparation & Polishing Tool

$1,392.94

Questions? Call us at (866) 812-6252

This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames. SAFETY

Loop handle enables precision handling

PERFORMANCE

Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion

Novatek Hydra 2 inch Kit

$1,450.00

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
Novatek Hydra – Complete Kit 2 and 2.5 inch

$1,475.00

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
Novatek 2 inch Air RotoPeen with Star Cutter

$1,587.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen with Star Cutters

$1,595.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Air RotoPeen with Flaps

$1,638.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen with Flaps

$1,725.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Star Cutter

$1,803.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Flaps

$1,849.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Electric RotoPeen with Flaps

$1,849.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Air RotoPeen Kit

$2,117.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen Kit

$2,117.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen Kit

$2,648.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek Nova-Strip Eco-Strip 100 115V

$2,995.00

Questions? Call us at (866) 812-6252

The EcoStrip 100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs. and utilizing a 15 amp, 110volt grounded outlet makes this an all around winner. The Ecostrip heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. Features • 196 square inch footprint removes 1 - 12”x12” in one cycle • Operates on 110V -15amp current • Safety sensor shuts down machine if left unattended • Compact design allows easy access to tight including steps and closets • The perfect compliment to the N378 and N1026 models • Heavy duty and light-weight aluminum construction
Novatek Nova-Strip 378

$4,975.00

Questions? Call us at (866) 812-6252

The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles. Features • 378 square inch footprint removes 2-12”x12” in one cycle • Operates off of 110v - 20amp current • Identical controller to the N1026 • Compact design allows easy access to tight spaces. • Heavy duty and light-weight aluminum construction
Novatek Infrared Nova-Strip 1026

$9,345.00

Questions? Call us at (866) 812-6252

The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal. This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.

Features & Benefits • 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle • Ceramic coated heat panel provides long life and durability • Computerized control systems guarantee precise and dependable operation • 100% solid state electronics. No mechanical relays or solenoids • Rapid heat up and cool down • Powder coated aluminum is durable and light-weight • Triple redundant safety features for operator safety • Integrated temperature indicator allows for monitoring of panel base • Operate on standard 220v, 50amp service eliminating external buck boosters” • 12v DC controls allow for safe, cool operation and long life • Case grounded for added safety

Title