Hand Tools | Jordan Power

Novatek Shrouded Heavy Duty Single Scaling Hammer – Long Handle

$557.00

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life
Novatek Shrouded Heavy Duty Single Scaling Hammer – Short Handle

$557.00

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life
Novatek Heavy Duty Triple Scaling Hammers – Long Handle

$639.00

Questions? Call us at (866) 812-6252

Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits

• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seals clean pistons on every stroke • Brush seal technology to extend piston life • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek Heavy Duty Triple Scaling Hammers – Short Handle

$639.00

Questions? Call us at (866) 812-6252

Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits

• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seals clean pistons on every stroke • Brush seal technology to extend piston life • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek Shrouded Heavy Duty Triple Scaling Hammers – Long Handle

$876.00

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek Shrouded Heavy Duty Triple Scaling Hammers – Short Handle

$876.00

Questions? Call us at (866) 812-6252

Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.

Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.

Features benefits
• Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek 2 inch Air RotoPeen with Star Cutter

$1,587.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Air RotoPeen with Flaps

$1,638.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Air RotoPeen Kit

$2,117.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen with Star Cutters

$1,595.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen with Flaps

$1,725.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 2 inch Electric RotoPeen Kit

$2,117.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Star Cutter

$1,803.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen with Flaps

$1,849.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Air RotoPeen Kit

$2,648.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 4 inch Electric RotoPeen with Flaps

$1,849.00

Questions? Call us at (866) 812-6252

Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
Novatek 5 inch Air Shrouded Grinder

$967.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 5 inch Electric Shrouded Grinder

$908.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 7 inch Air Shrouded Grinder

$993.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 7 inch Electric Shrouded Grinder

$935.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek 19 Inline Chisel Vibration Reduced Scaler

$526.00

Questions? Call us at (866) 812-6252

The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration. Features & Benefits
• Our most compact vibration reduced scaler • Inline configuration allows for access of tight areas • Steel components offer durability and long-life • 2400 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration. • Operator safety and comfort VRS019CS -Inline Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
Novatek 19 Inline Needle Vibration Reduced Scaler

$526.00

Questions? Call us at (866) 812-6252

The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration. Features & Benefits
• Our most compact vibration reduced scaler • Inline configuration allows for access of tight areas • Steel components offer durability and long-life • 2400 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration. • Operator safety and comfort VRS019NS -Inline Needle Scalers • Equipped with 19pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Tool-less needle replacement for easy field replacement • Dust collection shrouds available
Novatek 28PG Vibration Reduced Needle Scalers

$449.00

Questions? Call us at (866) 812-6252

The 28PG Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 28PG VRS scalers are our most powerful pistol grip vibration scalers.These models significantly decreases the posibility of vibration related injuries. All the power with less vibration. Features & Benefits • Our most compact, pistol grip vibration reduced scaler • Pistol grip configuration is ergonomic and comfortable • Steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration • Operator safety and comfort VRS028NPG -Pistol Grip Needle Scalers • Equipped with 28pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Tool-less needle replacement for easy field replacement • Dust collection shrouds available
Novatek Hydra 2 inch Kit

$1,450.00

Questions? Call us at (866) 812-6252

The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device

Title