Surface Prep Equipment Archives

Novatek 7 inch Air Shrouded Grinder

$993.00

Questions? Call us at (866) 812-6252

Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5” & 7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives

Edco Magna Trap Single Disc Floor Grinder

$4,664.40

Questions? Call us at (866) 812-6252

GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders

Edco Magna-Trap 7″ Turbo Edge Grinder

$3,895.00

Questions? Call us at (866) 812-6252

Three-position articulating frame adjustment for left angle, right angle or straight position grinding
Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
New & improved tapered roller bearings provide less maintenance and longer life

Edco Magna-Trap Dual-Disc Floor Grinder

$6,595.00 – $8,056.00

Questions? Call us at (866) 812-6252

MODELS: 2EC-NG, 2GC-NG

The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.

GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight! Multi-Vac port for use with 2″ or 3″ vacuum hose 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts Gas & electric power options available Includes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control 6 grinding accessories required per loading

Edco Magna-Trap Turbo Lite Grinder

$3,661.99

Questions? Call us at (866) 812-6252

The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.

Resurfaces hundreds of sq ft per hour
Compatible with EDCO Vortex 200 Vacuum for dust-free working
At only 90lbs it fits inside car trunks when the handlebar is collapsed
Accepts EDCO Magna-Trap® Slide-On Tooling

Edco 18″ Compact Saw – Downcut

$2,974.90

Questions? Call us at (866) 812-6252

Model: KL-18 BLADE NOT INCLUDED

18″ blade capacity
NEW & Improved throttle cable
Easy turn crank, for lowering and raising blades in and out of cut
Screw boot belt tensioner prevents frame damage
7-gauge steel blade guard with welded protective segment flap
Heavy-Duty lifting bail (optional)
13 HP gasoline engine
Heavy-Duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
High quality molded rubber wheels

National 6280HD Gladiator Floor Scraper

$16,075.00

Questions? Call us at (866) 812-6252

1 Available Please contact us for delivery and lead times Click here for the full National Flooring Equipment catalogue The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.

Self-contained, limited-maintenance hydraulic fluid
Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Design incorporates nine isolators for the toughest jobs
Patented isolator overtravel design ensures safety on the toughest jobs

Blastrac BDC-22 Dust Collector

$2,700.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Blastrac BDC-22 dust collector is equipped with a Longopac bagging system, which is easy to mount and handle. Thanks to this system, the operators have no more contact with the dust in their direct vicinity. The Blastrac BDC-22 dust collection system is equipped with a M-class star filter and it is very versatile. The BDC-22 is ideally suited for use with medium shot blasting, grinding, polishing and scarifying machines. For a safe, dust free and perfectly clean jobsite Blastrac has designed a full range of consumables and optional items to get the best possible results out of your dust collector. Easy to maneuverer and transport due to the robust wheels with brake systems. User friendly design, just connect the hose to the dust collector and you are ready to go. Limited downtime is essential for any successful job. Due to the special designs our medium dust collection systems allows you to change the dust bag quickly for limited downtime.
Metabo 7″ Surface Preparation Kit Angle Grinder (US606467800)

$538.10
Questions? Call us at (866) 812-6252

Metabo safety switch prevents unintentional start-up

Tool-free adjustable guard; twist-proof

Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health

Side handle can be mounted at three positions

Swivelling main handle: high safety and better handling when cutting

Auto-stop carbon brushes to protect the motor