Scarifiers & Scabblers

Commercial scarification machines for sale.

Shop all makes and models of scarifying equipment for floors and hard surfaces.Free shipping on select products. For assistance in choosing the right machine, please call us at (866) 812-6252. Trade-ins welcome and we offer competitive financing for qualified customers. Conveniently located in Akron, Cleveland, Toledo and Columbus Ohio and Rockledge Florida. Our Rockledge location serves the Greater Orlando area.

Husqvarna CG 200 Floor Scarifier

$3,695.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Husqvarna's CG 200 is a highly productive scarifier, designed to remove concrete fast and aggressively. Applications include removing coatings (heavy floor tile mastics and epoxy materials), light or heavy milling, grooving and texturing of walkways to make them slip resistant, removing trip hazards, and levelling misaligned concrete joints and uneven surfaces.

BW SB-6 Shot Blaster

Questions? Call us at (866) 812-6252

The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.

Lite Prep SG-20 Spyrogrinder

Request a Quote

Questions? Call us at (866) 812-6252

Comes with (2) 30lb weights

With A working width of 20” and a wide range of grinding, sanding, polishing, and scraping attachments, the Spirogrinder series is highly versatile and delivers excellent results on a wide variety of floor surfaces including marble, terrazzo, stone and concrete. All Spirogrinder machines may be used for wet or dry applications, and the VS models offer complete control over operating speed. Three specially designed rotating heads mounted on a counter-rotating planetary driver grind coatings and paint off of hard floor surfaces to leave a smooth, open, professional finish. Brush skirt and optional vac system enables dust-free operation on all models, and optional, add-on stackable 20, 30 or 35 lb. weights are also available. Spirogrinder machines are well-engineered, sturdy, economical, efficient, and so easy to use that even unskilled personnel can produce expert results.

DG-25 Diamond Grinder/Polisher Attachment (for SCB-1200)

Questions? Call us at (866) 812-6252

The DG-25 Diamond Grinder/Polisher is designed for coating removal to high gloss polishing on totally dry concrete. A rubber mounted grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200-K, while removing all material off the surface and reducing cleanup costs and effort. With twin, one piece 16” rubber mounted, belt driven grinding heads that are adjusted up and down using air pressure, giving you infinite adjustability.. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing.

BW SC-12 Scarifier Head Attachment (for SCB-1200)

Questions? Call us at (866) 812-6252

BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one-handed operation controls for raising and lowering heads, and easy to turn manual steering were designed with the contractor in mind. The SC-12 Scarifying Head attachment is a state of the art design that is self-leveling, automatically adjusting itself to different contours of the floor or pavement. You will achieve an accurate removal of thin mill coatings to 1/4” overlays. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages you can go from steel to carbide cutters as well as different cage widths in minutes. The SCB-1200 with SC-12 Scarifier Head Attachment will put you ahead of the competition with its faster production rates, and a vacuum collector system that eliminates dust and removes all material from the scarified surface.

Rubber Membrane Removal
Concrete Milling
Line Striping
Bridge and Parking Decks

SPE BEF 275 Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

SPE BEF 275 Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

SPE BEF200N-2A Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

SPE BEF200N-4A Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

Edco 3 Head Crete-Crusher

$8,757.06

Questions? Call us at (866) 812-6252

MODEL: CD-3

Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
Delivers 1,200 hits per minute for fast surface removal
Requires only 100 CFM at 100 PSI Heavy-duty 1/4″ steel frame
2″ Vacuum Port for dust-free operation Automatic in-line lubricator (oiler)
WHIPCHEK Cable assures safe air hose hookup
Three, 5 Point Carbide Bits included

Edco 5 Head Crete-Crusher

$14,627.99

Questions? Call us at (866) 812-6252

MODEL: CD-5

Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
Delivers 1,200 hits per minute for fast surface removal
Requires only 160 CFM at 100 PSI Heavy-duty 1/4″ steel frame
2″ Vacuum Port for dust-free operation
Automatic in-line lubricator (oiler)
WHIPCHEK Cable assures safe air hose hookup
Five, 5 Point Carbide Bits included

Edco 10″ Self Propelled Crete-Planer

$15,350.40 – $16,901.00

Questions? Call us at (866) 812-6252

MODELS: CPU-10FC-G, CPU-10-FC-E

10″ working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8″
Adjustable depth control up to 3/16″ working depth per pass
Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
Includes lifting bail, oil alert and hour meter
Optional outrigger axle enables the CPU-10(FC) to follow slab contours closely when working on uneven surfaces
Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes

Edco 10″ Walk-Behind Crete-Planer

$6,984.00 – $8,053.20

Questions? Call us at (866) 812-6252

Models: CPM-10G, CPM-10E

10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
1/4” steel frame
Heavy-duty, oversized bearings
Weighs 299 lbs. with cutters
Tethered emergency stop switch
Larger 6” wheels in the rear for easy handling
Gasoline or Electric models available
Vacuum port standard for dust-free cutting
6-Shaft and 8-Shaft easy change, side loading drums available
Tungsten carbide or steel cutters available

Edco 8″ Walk-Behind Scari-Lite Crete-Planer

$4,519.80

Questions? Call us at (866) 812-6252

MODELS: CPL-8E, CPL-8G

8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
8-Inch, 6-Shaft drum accepts carbide and steel cutters
Etch the surface for new coatings
Available in 1.5HP Electric or 5.5HP Gasoline
Comes standard with universal vacuum port hookup
Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane

Edco 8″ Walk-Behind Crete-Planer

$6,485.31 – $10,793.48

Questions? Call us at (866) 812-6252

MODELS: CPM-8G, CPM-8E

8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″
Removes traffic lines at 800-1,000 lineal ft. per hour
Power source over drum to eliminate vibration and maximize surface contact
Compact design
Front-mounted lifting handle makes loading and unloading easy
Vacuum port equipped

Cimex R48HD Surface Scarifier

$5,125.00

Questions? Call us at (866) 812-6252

Commercial Grinding Greatness. Comes with (1) 30lb weight The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects. The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios. These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring.