For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
The 300BU is a battery operated Ultra-High Speed (“UHS”) burnisher that rapidly produces high levels of gloss on VCT, polished concrete and other hard floor surfaces. The 300BU features SteadyOne™ pad control technology that dramatically improves the performance and life span of burnishing pads while producing excellent single-pass results. This powerful burnisher is available in 20″, 24″, 27″, 28″, and 30″ models.
The 300BU comes with a dust control filter system for clean, quiet and efficient burnishing. Powered by three 12-volt 228 AH batteries, the 300BU can burnish over 26,000 square feet per hour (2400 square meters) and producing only 67 decibels of soft noise. Clean, safe and effective, the 300BU is a burnisher you can count on to maintain floors at any hour in any facility.
Do you ever get inconsistent results with your battery burnisher? It may be because your burnisher doesn’t have the ability to adjust to changing conditions. The 300BU does. With Steadyone Technology built into every 300BU, the burnishing head automatically adjusts to changing floor conditions and changing pad conditions, producing consistent results every time. Exclusive to the 300BU, this “smart” adjustment produces great results – fast – in just a single pass.
SteadyOne™ uses advanced fluid drive technology to maintain constant pad pressure and produce more consistent results. Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today … and tomorrow.
Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition.
TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing.
SAFETY
Dual rear vacuum ports
Removable handle and weights for easy transport
COMFORT
Three-part adjustable angle handle
PERFORMANCE
Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
Variable speed control
Flip-style weights for added or decreased head pressure
18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames.
SAFETY
Loop handle enables precision handling
PERFORMANCE
Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion
Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal
SAFETY
Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal.
SAFETY
Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
SAFETY
Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine
COMFORT
Fully adjustable handle accommodates a range of operating positions
PERFORMANCE
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed
The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
DL2000 Dust Collector, 115 V
SAFETY
Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
Heavy-duty, anti-static collection hose provides durability and safety
PERFORMANCE
Primary filter
State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
DL3000 Dust Collector, 230 V
SAFETY
Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
PERFORMANCE
Primary filter
Heavy-duty, anti-static collection hose provides durability and safety
The GP3000 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor. The 28-inch cleaning path and increased grinding head pressure make this an ideal machine for commercial and industrial projects.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 20-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
The new and improved GP700 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Forward/rear locking pitch-adjustable axle that allows the operator to change the angle of the head pressure from the front to the back to compensate for inclines/declines on uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 7-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
Click here for the full National Flooring Equipment catalogue
This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
21-inch nonmarking tires
Compact design fits through standard door frames and elevator doors
Hydraulic brake system automatically engages when the machine is in the off position
Front caster wheels allow increased maneuverability in tight spaces position
Improved exhaust system meets federal OSHA regulations
Click here for the full National Flooring Equipment catalogue
The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more.
A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.
Angle-adjustment wheel changes pitch of the blade in seconds
1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
Removable front weight provides additional down pressure and facilitates easy loading/unloading
Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Click here for the full National Flooring Equipment catalogue
The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs.
This is a special order machine. Please contact us for more information and lead times.
Additional carts, power packs and chargers are available for purchase if you require longer run times.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head
Extra weight compartments
Larger/deepened forklift pockets
Nonmarking tires
Trailer hitch
Flip-up back lid for quick and easy battery changing
Front debris deflector protects machine from loose material
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Larger/deepened forklift pockets
Nonmarking tires
Compact design fits through standard door frames and elevator doors
Improved exhaust system meets federal OSHA regulations
Front caster wheels allow increased maneuverability in tight spaces
12-volt LED light for increased visibility on the jobsite
Remove traffic lines from asphalt – and get the job done quickly!
EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones.
Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
Factory Cat's Floor Sweepers sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.
The Factory Cat model TR's design was built from the success of our Model 34 walk behind sweeper. The TR's side brooms sweep up dirt in the corners while a huge tubular sweeping broom under the machine sweeps up the dirt and debris from the floor and packs it into the steel hopper. Meanwhile, the second stage vacuums up the dust and traps it in a polypropylene felt "baghouse" filter. Factory Cat's Industrial floor sweepers can pick up whole bags of cement at a time without leaving a trace of dust behind.
Factory Cat's Floor Sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.
The Factory Cat model 34 Walk Behind Sweeper is the machine that built our company. A Industrial Sweeper famous for its ability to survive decades in the harshest applications: including mines, brick manufacturing and rugged steel mills. Designed almost 25 years ago, this floor sweeper can sweep through thick saw dust found in furniture manufacturing plants and the dust in paper mills. Bulk powder packaging clients with concrete powder or copier toner like its sweeping power without it blowing dust everywhere. The battery powers the sweeper for over 4 hours on a single charge and the sweeping broom is self adjusting for wear.
Factory Cat's GTX Rider Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The GTX Floor Scrubber Dryer comes equipped with a powerful front-wheel drive for climbing ramps and max operator ease.
While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the GTX Floor Scrubber Dryer easy to maneuver and simple to service. The deck is protected by heavy duty metal shrouds or large polyurethane rollers to keep the unit from marking walls and your investment safe.
The GTX Scrubbers are available with Disk and Cylindrical scrub heads.
Factory Cat's MICROMINI Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The MICROMINI Walk Behind Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease or a Pad Assist version.
While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the MICROMINI Floor Scrubber Dryer easy to maneuver into tight areas, and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.
The MICROMINI Scrubbers are available with Disk scrub heads.
Disk: Popular in most applications where general cleaning is a concern.
FactoryCat's GTR Rider Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The GTR Floor Scrubber Dryer comes equipped with a powerful front-wheel drive for climbing ramps and max operator ease.
While keeping with the constant durability that FactoryCat machines have to offer, your operators will find the GTR Floor Scrubber Dryer easy to maneuver and simple to service. The deck is protected by the steel frame and large polyurethane rollers to keep the unit from marking walls.
The EX Scrubbers are available with Disk and Cylindrical scrub heads.
FactoryCat's PILOT-HD Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The PILOT-HD Micro Rider Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease.
While keeping with the constant durability that FactoryCat machines have to offer, your operators will find the PILOT-HD Floor Scrubber Dryer easy to maneuver and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.
The PILOT-HD Scrubbers are available with Disk & Cylindrical scrub heads.
Disk: Popular in most applications where general cleaning is a concern.
Cylindrical: Great when small debris is a concern as well as grouted tile lines.
FactoryCat's MAG-HD Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The MAG-HD Walk Behind Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease.
While keeping with the constant durability that FactoryCat machines have to offer, your operators will find the MAG-HD Floor Scrubber Dryer easy to maneuver and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.
The MAG-HD Scrubbers are available with Disk & Cylindrical scrub heads.
Disk: Popular in most applications where general cleaning is a concern.
Cylindrical: Great when small debris is a concern as well as grouted tile lines.
FactoryCat's MINI-HD Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The MINI-HDWalk Behind Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease.
While keeping with the constant durability that FactoryCat machines have to offer, your operators will find the MINI-HD Floor Scrubber Dryer easy to maneuver into tight areas, and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.
The MINI-HD Scrubbers are available with Disk & Cylindrical scrub heads.
Disk: Popular in most applications where general cleaning is a concern.
Cylindrical: Great when small debris is a concern as well as grouted tile lines.
Factory Cat's MICRO-HD Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The MICRO-HD Walk Behind Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease or a Pad Assist version.
While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the MICRO-HD Floor Scrubber Dryer easy to maneuver into tight areas, and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.
The MICRO-HD Scrubbers are available with Disk & Cylindrical scrub heads.
Disk: Popular in most applications where general cleaning is a concern.
Cylindrical: Great when small debris is a concern as well as grouted tile lines.
MICROMAG Walk Behind Floor Scrubber:
Factory Cat's MICROMAG Walk Behind Floor Scrubber Dryer was designed based off of our already well known MAGNUM and MINIMAG. Our goal with the MICROMAG Floor Scrubber is to have the smallest Walk Behind Floor Scrubber Dryer available without sacrificing on solution tank space or productivity in terms of scrubbing performance.
Factory Cat's MICROMAG comes equipped with either a Brush-Assist drive which allows for operator ease with little-to-no pushing, or a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease.
The Brush-Assist drive is great for level surfaces and for a cheaper option in comparison to the Traction.
The Traction drive offers unparalleled performance when climbing steep ramps and working on non-level surfaces.
While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the MICROMAG Floor Scrubber Dryer easy to use, as there is an adjustable handlebar for all heights of operators, and easy to maneuver into tight areas. The deck is protected by a 10 gauge steel frame and polyurethane rollers to keep the unit from marking walls.
Stone Polishing:
Our Disk machines offer nearly 50% more power than other machines. Along with having the ability to scrub your floors, you can also buy separate pads and equip your machine for Stone Polishing. If you would like more information about Stone Polishing, click here.
MICROMAG Walk Behind Floor Scrubber Dryer Specs:
Dimensions (L x W x H): 40" x 18" x 38"
Weight: 317 lbs.
Disk Brush Brush: 17" & 20"
Cleaning Width: 17" & 20"
Cleaning Rate (sq. ft/hr): 20,525
The Cimex Escalator Cleaner provides a simple solution to the problem of dirty escalators by quickly and efficiently cleaning the treads. The machine can utilize two different brush sets; The Tynex Brush for aggressive sweeping or the Nylon Brush for routine maintenance.
Thorough cleaning of the treads is achieved by dual powered 290 rpm twin brushes which loosen dirt and grit. The grimy residue is then instantly removed by the Escalator Cleaners dual vacuum motors, leaving the escalator working at peak performance and keeping surfaces clean and sanitary.
A well maintained escalator or moving walkway helps to not only to improve overall appearance but reduce service costs as well. The quick-change disposable bag system is fast and easy, providing an eco-friendly disposal option.
The Efficient, Rugged and Versatile Large Area Scrubber
The SC6500™ rider floor scrubber combines effortless control and efficient, sustainable scrubbing in one powerful, compact package — ideal for demanding applications including supermarkets, warehouses, manufacturing plants, airports, universities and more.
Benefits of SC6500 Rider Floor Scrubbers
The SC6500 combines aggressive cleaning performance with the tightest turning radius in its class. Delivering efficient single-pass cleaning, heavy-duty, durable construction and the versatility to adapt to any job, including the optional EcoFlex™ System to help you reduce costs by saving water and detergent.
Choose the right floor scrubber for your application — 3 scrubbing widths (40”, 45”, or 48”) in either cylindrical or disc scrubber configurations
Maximize scrubbing time with the large 70 gal. solution and recovery tanks
Clean floors in a single pass thanks to the high-power scrub deck powered by dual 1.5 hp motors
Monitor performance and improve productivity with the optional TrackClean™ centralized fleet management system
Invest in a floor scrubber that’s built to last — industrial bumper, frame-mounted deck protection and high-strength tubular, steel construction
Reduce total cost of ownership and ensure smooth, quiet, precise control with the maintenance-free AC brushless propulsion system
Effectively edge clean with the offset scrub deck and standard side broom on cylindrical models
For Sale, The 7765 collects debris while powerfully scrubbing dirt, grease and grime – all in a single pass – leaving your facility with a clean, dry floor. Big on performance and capacity, this true sweeper-scrubber can handle your toughest cleaning jobs.
The aggressive 7765 features all hydraulic operation and up to 600 pounds of downward scrub brush pressure for deep cleaning. The patented Advance Accu-Track™ squeegee system leaves a clean, dry floor even in tight turns. The 7765 is powered by your choice of an 86 hp General Motors® gas or LP, or a 47.3 hp Mitsubishi® diesel engine – each of which meets stringent EPA emission regulations. Heavy-duty, all-steel construction and welded steel chassis assure durability even in harsh conditions.
The large capacity 7765 features massive 100-gallon stainless steel solution and recovery tanks, and an all-steel 16-cubic-foot debris hopper. The broad 54-inch scrubbing and 60-inch sweeping paths make fast work of large areas. Dust is minimized via the 107-square-foot dust filter with automatic shaker system.
Added productivity comes from low maintenance construction, all hydraulic systems and power steering. The huge recovery tank enables longer floor time, and it tilts out for easy dumping and cleaning.
This rugged sweeper-scrubber also delivers enhanced safety. Electric drive and rack-and-pinion power steering systems give you full control. Rider position assures clear sight lines, and an ergonomic operator’s compartment reduces fatigue.
Independent dry sweeping system picks up dirt and debris, while brush drives aggressively scrub the dirtiest floors
600 pounds of downward brush pressure scrubs off even the deepest embedded grime
100-gallon stainless steel solution/recovery tanks with tilt-out cleaning
Accu-Track™ squeegee provides superior water pickup even in tight turns
Easy-access engine, electrical and hydraulic components make maintenance a breeze
Deeply-padded seat and power steering provide operator comfort
The new green class of industrial cleaning technology has arrived.
For Sale, In a single broad stroke, the Advance CS7010 Combination Sweeper–Scrubber reinvents an entire class of equipment by reducing total cost of ownership — including operation, labor and maintenance, while effectively doubling fuel economy and runtime efficiency. Now, the most economical solution is also the most ecological.
The CS7010 is available in three configurations: LPG/Gas-Hybrid, Diesel-Hybrid and ePower™ Battery. They all deliver unparalleled performance, while replacing power-hungry, high-maintenance hydraulic systems with efficient, state-of-the-art Electric Drive technology. Whichever model you choose, the CS7010 delivers the lowest cost of ownership and the most sustainable cleaning solution in its class
Dedicated dry sweep and wet scrubbing for one-pass cleaning.
Like other combination sweeper–scrubbers, the CS7010 lets you sweep and scrub in a single pass. But that’s where the similarities end. Compared to competitive dual cylindrical sweeper– scrubber designs, the CS7010 utilizes a cylindrical sweeping system and a separate disc scrubbing system. Dedicated sweeping and scrubbing functions with one-pass cleaning power keep dry debris dry without introducing scrub solution into the debris hopper. This provides operators and equipment owners with increased productivity and reduced maintenance.
Lower total cost of ownership.
The CS7010 dispels the complexity and high maintenance of hydraulic systems that power conventional sweeper–scrubbers. We’ve eliminated large hydraulic reservoirs, filters and oil coolers as well as the leak-prone hydraulic hoses, pumps, motors and valves. Hydraulic drives have been replaced with an intelligent system of electronically-controlled, low-maintenance electric drives. This technology shift alone will save the average owner thousands of dollars in reduced maintenance costs.
The new green class of industrial cleaning technology has arrived.
For Sale, In a single broad stroke, the Advance CS7010 Combination Sweeper–Scrubber reinvents an entire class of equipment by reducing total cost of ownership — including operation, labor and maintenance, while effectively doubling fuel economy and runtime efficiency. Now, the most economical solution is also the most ecological.
The CS7010 is available in three configurations: LPG/Gas-Hybrid, Diesel-Hybrid and ePower™ Battery. They all deliver unparalleled performance, while replacing power-hungry, high-maintenance hydraulic systems with efficient, state-of-the-art Electric Drive technology. Whichever model you choose, the CS7010 delivers the lowest cost of ownership and the most sustainable cleaning solution in its class
Dedicated dry sweep and wet scrubbing for one-pass cleaning.
Like other combination sweeper–scrubbers, the CS7010 lets you sweep and scrub in a single pass. But that’s where the similarities end. Compared to competitive dual cylindrical sweeper– scrubber designs, the CS7010 utilizes a cylindrical sweeping system and a separate disc scrubbing system. Dedicated sweeping and scrubbing functions with one-pass cleaning power keep dry debris dry without introducing scrub solution into the debris hopper. This provides operators and equipment owners with increased productivity and reduced maintenance.
Lower total cost of ownership.
The CS7010 dispels the complexity and high maintenance of hydraulic systems that power conventional sweeper–scrubbers. We’ve eliminated large hydraulic reservoirs, filters and oil coolers as well as the leak-prone hydraulic hoses, pumps, motors and valves. Hydraulic drives have been replaced with an intelligent system of electronically-controlled, low-maintenance electric drives. This technology shift alone will save the average owner thousands of dollars in reduced maintenance costs.
The innovative SW5500™ industrial sweeper is easy-to-use, highly productive, and will minimize your total costs to clean by providing efficient sweeping within a small footprint.
The SW5500 Rider Sweeper delivers everything you’d expect and a lot more. With emissions-free battery configurations and a high-capacity high-dump hopper, this sweeper will increase your productivity and reduce your costs, whether you’re sweeping large floors or outdoor areas.
Contribute to your green-cleaning efforts and reduce your cleaning costs with emissions-free battery configurations
Wear-compensating main broom sweeping system extends productivity through the life of the brush
Control dust at the side broom with our available industry exclusive DustGuard™
Improve dumping efficiency with the high-capacity, high-dump hopper
Simplify operation and maximize efficiency — all sweeping functions activated through the OneTouch™ controls and drive pedal
Ensure operator safety with our Clear-View™ design, automatic speed reduction during turns and LED headlights
Easy maintenance, no tools required with MaxAccess™ interlocking compartments for industry-best access to critical components
The Advance SW8000™ is unsurpassed in indoor and outdoor power sweeping. A 50 inch main broom – the widest in this sweeper class – combined with full time dust controlled dual side brooms*, creates an incredible 77 inch sweep path.
On conventional rider sweepers, dust is controlled at the main broom only. The side brooms, the biggest source of dust, must be raised in open areas when fugitive dust is a concern. The SW8000 is not a conventional machine. The innovative DustClear™ Five Stage Dust Control System allows for full time use of the dual side brooms by controlling dust along the entire sweep path – including the side brooms. Productivity is then increased by over 70% compared with conventional sweepers that control dust only at the main broom.
MaxAccess™
– Minimizes downtime and maximizes efficiency, reliability and longevity through quick and easy access to all engine and hydraulic components.
Easy To Operate
– One-Touch™ controls and a single foot pedal controls direction plus activates the brooms and dust control system and offers the operator the easiest machine to use in the industry.
Clear-View™
– Offset hopper allows the operator to view the side broom and the area in front of the sweeper without having to lean outside the frame of the machine making it safer and more comfortable to use.
Operator Safety
– Hopper safety arm is controlled from the operator’s compartment. Operator is safe from moving parts through the interlocking engine cover. Impact-adsorbing roto-molded body structure and 5 mph bumper provides the ultimate in operator safety.
True industrial designed Kubota® engine with enclosed gear driven valve train for reliable cost-effective performance
One-Touch™ lever activates and controls complete sweeping and dust control systems
DustClear™ 5-Stage Dust Control System minimizes fugitive dust
Sweep system only activates when machine is in motion, for increased safety and longer broom life
Wide 50 inch main broom plus the dual side brooms create a superior 77 inch dust controlled sweep path
Comfort ride 21 inch pneumatic tires offer the operator a smoother ride with less jarring on rough surfaces
The Advance SW8000™ is unsurpassed in indoor and outdoor power sweeping. A 50 inch main broom – the widest in this sweeper class – combined with full time dust controlled dual side brooms*, creates an incredible 77 inch sweep path.
On conventional rider sweepers, dust is controlled at the main broom only. The side brooms, the biggest source of dust, must be raised in open areas when fugitive dust is a concern. The SW8000 is not a conventional machine. The innovative DustClear™ Five Stage Dust Control System allows for full time use of the dual side brooms by controlling dust along the entire sweep path – including the side brooms. Productivity is then increased by over 70% compared with conventional sweepers that control dust only at the main broom.
MaxAccess™
– Minimizes downtime and maximizes efficiency, reliability and longevity through quick and easy access to all engine and hydraulic components.
Easy To Operate
– One-Touch™ controls and a single foot pedal controls direction plus activates the brooms and dust control system and offers the operator the easiest machine to use in the industry.
Clear-View™
– Offset hopper allows the operator to view the side broom and the area in front of the sweeper without having to lean outside the frame of the machine making it safer and more comfortable to use.
Operator Safety
– Hopper safety arm is controlled from the operator’s compartment. Operator is safe from moving parts through the interlocking engine cover. Impact-adsorbing roto-molded body structure and 5 mph bumper provides the ultimate in operator safety.
True industrial designed Kubota® engine with enclosed gear driven valve train for reliable cost-effective performance
One-Touch™ lever activates and controls complete sweeping and dust control systems
DustClear™ 5-Stage Dust Control System minimizes fugitive dust
Sweep system only activates when machine is in motion, for increased safety and longer broom life
Wide 50 inch main broom plus the dual side brooms create a superior 77 inch dust controlled sweep path
Comfort ride 21 inch pneumatic tires offer the operator a smoother ride with less jarring on rough surfaces
Industrial Sweeping with Exceptional Dust Control
With its wide 64” sweeping path, exceptional maneuverability and high capacity hopper, the Proterra™ Industrial Rider Sweeper will make fast work of large sweeping jobs in factories, warehouses, parking garages, foundries and more.
Benefits of Proterra Industrial Rider Sweepers
The Advance Proterra is an easy-to-operate, high-performance sweeping solution that comes equipped with our industry exclusive DustGuard™, which uses a light mist to suppress dust at the side brooms. The result is a dust controlled sweep path that’s 75% more productive than its nearest competitor.
Control dust with our industry exclusive DustGuard™, part of our DustClear™ Five-stage Dust Control System
Capture more debris with the tailgate style hopper door
Simplify operation and maximize efficiency — Analog-logic™ interface provides intuitive single motion activation of the sweep system, and the Set-’N-Forget™ pressure setting automatically adjusts sweep pressure as the main broom wears
Ensure operator safety with our Clear-View™ design, large ergonomic operator comfort zone and large pneumatic tires
Invest in a sweeper that’s built to last — rust-proof structural roto-molded hopper, integrated 5 mph bumper and rugged Kubota® industrial engine (battery power also available)
Expedite service and repair with MaxAccess™ interlocking compartments for industry-best access to critical components
Industrial Sweeping with Exceptional Dust Control
With its wide 64” sweeping path, exceptional maneuverability and high capacity hopper, the Proterra™ Industrial Rider Sweeper will make fast work of large sweeping jobs in factories, warehouses, parking garages, foundries and more.
Benefits of Proterra Industrial Rider Sweepers
The Advance Proterra is an easy-to-operate, high-performance sweeping solution that comes equipped with our industry exclusive DustGuard™, which uses a light mist to suppress dust at the side brooms. The result is a dust controlled sweep path that’s 75% more productive than its nearest competitor.
Control dust with our industry exclusive DustGuard™, part of our DustClear™ Five-stage Dust Control System
Capture more debris with the tailgate style hopper door
Simplify operation and maximize efficiency — Analog-logic™ interface provides intuitive single motion activation of the sweep system, and the Set-’N-Forget™ pressure setting automatically adjusts sweep pressure as the main broom wears
Ensure operator safety with our Clear-View™ design, large ergonomic operator comfort zone and large pneumatic tires
Invest in a sweeper that’s built to last — rust-proof structural roto-molded hopper, integrated 5 mph bumper and rugged Kubota® industrial engine (battery power also available)
Expedite service and repair with MaxAccess™ interlocking compartments for industry-best access to critical components
The SW4000™ Rider Sweeper provides high productivity and reliable cleaning performance to attack tough sweeping applications.
Designed with a safe and efficient hydraulic high dump, the SW4000 delivers exceptional productivity. Operator intuitive front wheel steering and front wheel drive offer superior maneuverability in tight corners or narrow aisles. From warehouse and distribution centers to outdoor parking lots and lumber yards, the SW4000 ensures a professionally swept finish for diverse indoor and outdoor applications.
For smooth, easy operation, the SW4000 features One-Touch™ sweeping capabilities—enabling all functions, including the main broom, side brooms, vacuum fan and the optional DustGuard™ misting system, to activate only while the sweeper is moving. This integration provides machine run-time of up to 4.5 hours on a single battery charge while minimizing wear on the brooms. The unobstructed view, high dump hopper easily deposits into a standard dumpster for safe handling and quick dumping. For enhanced sweeping capabilities, the optional DustGuard misting system provides up to 75% greater dust controlled sweepingpath compared to the nearest comparable competitor’s machines.
To ensure the filter remains dust-free for optimal performance, the SW4000 features a timed Liberator™ multi-frequency filter shaker that cleans the filter more effectively to restore airflow for maximum dust control.
The SW4000 is designed to simplify sweeping with retractable, springloaded side brooms and rugged steel guards to virtually eliminate risk of machine damage. It also features a left or right side access driver’s compartment, adjustable seat and column-mounted controls for ergonomic and intuitive operation. Tools-free broom and filter removal and battery compartment makes routine maintenance fast and easy.
Easy-to-use analog controls
Simple, One-Touch™ Sweeping with the drive pedal activates/ de-activates all sweeping procedures
Front-wheel steering and drive provides increased maneuverability
Easy machine charging capabilities located inside
WiRobust polyethylene covers and recyclable materials provide a durable design
Durable side brooms feature flexible mounting and protection using rugged steel guards
The Viper AS5160 is a highly productive walk-behind scrubber dryer with high battery endurance and tank capacity to clean for hours. Being easy and comfortable to use with their ergonomic design, these robust machines are ready for an in-depth performance on indoor surfaces.
Ideal for cleaning in hotels and restaurants, bus and train stations, factories, supermarkets, shopping malls, hospitals, schools, and other institutions.
With a working width of 51 cm and a powerful 450 W brush motor, these machines will get the job done with both speed and ease. Especially if you go for the model AS5160 T – for Traction – equipped with a 150 W drive motor bringing the scrubber dryer forward.
The machines are well-balanced and easy to maneuver thanks to their big wheels and strong casters. Hour meter and water level indicator will keep you updated, and the speed reducing gear drive system of the Traction version ensure smooth operation with a minimum of effort.
For intensive cleaning or maintaining large coated floor areas the AS5160TO with orbital scrub deck ensures multidirectional cleaning performance with low solution and detergent consumption and the square deck gives easy to access corners.
Orbital version saving water and detergent equipped
with traction motor and automatic raise and lowering of the scrub deck
AS5160T - Traction-model: 150W drive motor
Easy to maneuver and transport: Big wheels and strong caters, making the machine well-balanced
Easy and convenient operation: 2 pcs safety switches
Control panel with intuitive display and buttons
Productive: Working width 51 cm
Brush and pad driver can be installed/un-installed automatically
Hour meter: Check how many hours the machine has been running
Water level indicator with volume visible on the tank
High capacity for increased productivity: 61-liter water tank/ 61-liter recovery tank
Robust and solid: Steady chassis system and rotationally molded tanks
Reliable: Heavy duty 79 cm aluminum squeegee
Accessories: Brush, pad holder, batteries 12V x2 and onboard charger
Optional brush skirt kit prevents the machine from splashing water splashing water
