Surface Prep Equipment Archives

Edco 8″ Walk-Behind Crete-Planer

$6,485.31 – $10,793.48

Questions? Call us at (866) 812-6252

MODELS: CPM-8G, CPM-8E

8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″
Removes traffic lines at 800-1,000 lineal ft. per hour
Power source over drum to eliminate vibration and maximize surface contact
Compact design
Front-mounted lifting handle makes loading and unloading easy
Vacuum port equipped

DG-25 Diamond Grinder/Polisher Attachment (for SCB-1200)

Questions? Call us at (866) 812-6252

The DG-25 Diamond Grinder/Polisher is designed for coating removal to high gloss polishing on totally dry concrete. A rubber mounted grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200-K, while removing all material off the surface and reducing cleanup costs and effort. With twin, one piece 16” rubber mounted, belt driven grinding heads that are adjusted up and down using air pressure, giving you infinite adjustability.. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing.

Edco Magna-Trap 10″ Turbo Grinder

$6,378.30 – $9,877.50

Questions? Call us at (866) 812-6252

The TG-10 is four times faster than conventional grinders.

10″ Working width will grind approximately 400-500 sq. ft. per hour at 1/16″ with an Magna-Trap® Dyma-Dots
Grind wet or dry
Includes 10″ Magna-Trap Multi-Tooling Disc & standard vacuum port
Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
Less torque on operator
Tapered roller bearings have improved seals for longer life and less maintenance
Adjust your grinder disc or multi-accessory plate with the rear wheel mounted level kit
Easy access turn style knob
Install different height diamond accessories and level them to ensure maximum productivity

Novatek Infrared Nova-Strip 1026

$9,345.00

Questions? Call us at (866) 812-6252

The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal. This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.

Features & Benefits • 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle • Ceramic coated heat panel provides long life and durability • Computerized control systems guarantee precise and dependable operation • 100% solid state electronics. No mechanical relays or solenoids • Rapid heat up and cool down • Powder coated aluminum is durable and light-weight • Triple redundant safety features for operator safety • Integrated temperature indicator allows for monitoring of panel base • Operate on standard 220v, 50amp service eliminating external buck boosters” • 12v DC controls allow for safe, cool operation and long life • Case grounded for added safety

Edco 3 Head Crete-Crusher

$8,757.06

Questions? Call us at (866) 812-6252

MODEL: CD-3

Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
Delivers 1,200 hits per minute for fast surface removal
Requires only 100 CFM at 100 PSI Heavy-duty 1/4″ steel frame
2″ Vacuum Port for dust-free operation Automatic in-line lubricator (oiler)
WHIPCHEK Cable assures safe air hose hookup
Three, 5 Point Carbide Bits included

Blastrac BDC-33 Dust Collector

$8,595.00
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The heavy-duty dust collection system is remarkably quiet and designed for multi-purpose use with medium to large grinding and polishing machines. The vertical profile is compact and offers great maneuverability with large wheels and two swiveling/locking casters. The ergonomic design also features easily accessible components for care and maintenance. The BDC-33 is an advanced unit that helps eliminate most all of the airborne dust and particulate generated with grinding and polishing equipment. The PPT is equipped with a wheeled dust-bin that dismounts smoothly for quick debris disposal and with a capacity of 143 lbs. make those efforts infrequent. The BDC-33 dust collector is equipped with the Longopac® bagging system and is perfect for a clean disposal. This powerful industrial vacuum is also perfect for contractors who must utilize a system that satisfies environmental concerns.

Compact unit is easy to maneuver

Fully automatic self-cleaning system for prolonged filter life

HEPA filter included

Quick release-and-attach dust bin

Maintenance friendly design

Durable steel construction

Overload relief valve to save blower engine

SPE BEF 275 Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

American Sanders FloorCrafter Belt Sander

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The FloorCrafter upholds a long tradition of providing precision instruments to a craftsman’s trade. The FloorCrafter, engineered to be the most aggressive belt machine in the industry, was also designed to provide reduced vibration. Its cutting ability allows the hardwood sanding professional the ability to increase production while achieving perfect results. With the patented Dolly Transport system, the FloorCrafter is truly a unique and innovative approach to hardwood floor sanding. Features:

Precision balanced drum with machined spiral cooling slots.

Patented one-tool leveling adjustment.

Recessed drum door provides better air seal and eases abrasive installation and adjustments.

Patented Dolly Transport System eases transport to and from job sites.

Exclusive “feathering” drum lowering handle eases operation.

Exclusive split rear caster for smooth forward/reverse transitions.

Husqvarna HTC 270 220-240 V Floor Grinder

$8,113.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. HTC 270 EG is a professional edge grinding machine allowing you to grind and polish edges quickly, efficiently and in an ergonomic manner. Instead of working in an uncomfortable position, grinding edges with handheld equipment, this machine makes it possible to tackle edges just as any other part of the floor, standing upright and progressing fast. Every step of the grinding and polishing process can be followed by mounting the same tools under the HTC 270 edge grinder as under the main floor grinder. The high head pressure and ingenious design (which allows for both left and right edge grinding) has earned praise from floor grinding specialists around the world. Additionally the low grinding head height of only 100 mm, enables grinding under shelves or other low-hanging obstacles. The floating cover follows the floor at all times and transportation is easy thanks to the detachable chassis.

Edco Magna-Trap Dual-Disc Floor Grinder

$6,595.00 – $8,056.00

Questions? Call us at (866) 812-6252

MODELS: 2EC-NG, 2GC-NG

The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.

GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight! Multi-Vac port for use with 2″ or 3″ vacuum hose 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts Gas & electric power options available Includes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control 6 grinding accessories required per loading

Edco 10″ Walk-Behind Crete-Planer

$6,984.00 – $8,053.20

Questions? Call us at (866) 812-6252

Models: CPM-10G, CPM-10E

10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
1/4” steel frame
Heavy-duty, oversized bearings
Weighs 299 lbs. with cutters
Tethered emergency stop switch
Larger 6” wheels in the rear for easy handling
Gasoline or Electric models available
Vacuum port standard for dust-free cutting
6-Shaft and 8-Shaft easy change, side loading drums available
Tungsten carbide or steel cutters available

Husqvarna BS 75 Floor Scraper

$7,866.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.

BS 75 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. This machine has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor stripper requires almost no maintenance. In addition, this floor scraper can be disassembled into 3 pieces for easy transportation up flights of stairs and into vehicles. It is also possible to add an additional 10 kg weight to mount on the weight block in order to make BS 75 more efficient on resilient floors. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.

Husqvarna BG 250P Floor Grinder

$7,838.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The BG 250P is a petrol-powered grinder designed to give you all the functionality and versatility you need for a wide range of surfaces. With a single grinding head, this machine focuses all its pressure onto a single diamond disc for more effective and aggressive grinding. The BG 250P is ideal for applications requiring heavy duty surface preparation of small to medium sized floors such as surface levelling, the removal of coating defects and adhesives, preparation before coating and much more. Other applications include industrial flooring, concrete preparation and decontamination. This machine is easy to transport and its 3 in diameter dust hose connection manages dust more efficiently, for a safer work environment. Without the need for power cables, you can also enjoy greater mobility on job sites and make more of your time count.

Husqvarna BG 250 230 V Floor Grinder

$7,838.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. BG 250 is a single disc concrete grinder designed for heavy duty surface preparation applications. BG 250 is very easy and comfortable to use with low vibrations. Thanks to its two front handles, it is possible to lift the machine up a flight of stairs. BG 250 has an asymmetric dust exhaust with a built-in deflector for improved/optimised dust extraction. In addition, it is equipped with a special drive system for optimum load distribution.

SPE BEF 275 Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Planing / Scarifying made easy...

Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.

275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life

National 5280 Floor Scraper

$7,610.94

Questions? Call us at (866) 812-6252

Click here for the full National Flooring Equipment catalogue This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces. Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.

Variable speed, 12 to 50 feet per minute
Self-contained, limited-maintenance hydraulic fluid
Removable 49-pound saddle weight helps increase or decrease down pressure and traction
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs

Husqvarna PG 450 Floor Grinder

$6,662.64 – $6,881.94

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. PG 450 is a versatile and user-friendly planetary floor grinder. Perfect for a wide range of applications, e.g. coating removal, concrete grinding and concrete polishing. It is ideal for rental and both professional and semi-professional applications due to its many self-adjusting benefits.

Husqvarna PG 400 Floor Grinder

$6,772.80

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. PG 400 is a versatile and very productive single disc floor grinder for a wide range of applications. With its 400 mm wide grinding width it efficiently grinds adhesives, paint, epoxy and spackle on medium to large concrete areas.

National Helix Floor Grinder

$6,687.91

Questions? Call us at (866) 812-6252

Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency. SAFETY

Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine

COMFORT

Fully adjustable handle accommodates a range of operating positions

PERFORMANCE

Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed

American Sanders Epoch HD-20 Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD-20 is a 20” version of the famed 230V dual speed Epoch HD. This multi-purpose machine delivers power and productivity. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand 20, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:

230V, 2.5HP motor for loads of low-end torque without overloading household circuits.

Dual speed capability for use with various grits, wood types, and job site conditions.

Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.

Removable weight bracket to provide better access to tight spaces.

Bright, flexible LED light (with replaceable bulb) for improved visibility.

Exclusive tilt-back wheel system protects pad drivers from damage.

Dust control ready.

Durable rigid, low profile skirt contains dust and allows close access to wall lines

With HydraSand 20 compared to traditional 20” planetary head:

32% less amp draw

14% more aggressive cut.

BW SC-12 Scarifier Head Attachment (for SCB-1200)

Questions? Call us at (866) 812-6252

BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one-handed operation controls for raising and lowering heads, and easy to turn manual steering were designed with the contractor in mind. The SC-12 Scarifying Head attachment is a state of the art design that is self-leveling, automatically adjusting itself to different contours of the floor or pavement. You will achieve an accurate removal of thin mill coatings to 1/4” overlays. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages you can go from steel to carbide cutters as well as different cage widths in minutes. The SCB-1200 with SC-12 Scarifier Head Attachment will put you ahead of the competition with its faster production rates, and a vacuum collector system that eliminates dust and removes all material from the scarified surface.

Rubber Membrane Removal
Concrete Milling
Line Striping
Bridge and Parking Decks

National DL3000 Dust Collector

$6,045.06

Questions? Call us at (866) 812-6252

The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.

DL3000 Dust Collector, 230 V

SAFETY

Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use

PERFORMANCE

Primary filter
Heavy-duty, anti-static collection hose provides durability and safety

Lite Prep SG-20 Spyrogrinder

Request a Quote

Questions? Call us at (866) 812-6252

Comes with (2) 30lb weights

With A working width of 20” and a wide range of grinding, sanding, polishing, and scraping attachments, the Spirogrinder series is highly versatile and delivers excellent results on a wide variety of floor surfaces including marble, terrazzo, stone and concrete. All Spirogrinder machines may be used for wet or dry applications, and the VS models offer complete control over operating speed. Three specially designed rotating heads mounted on a counter-rotating planetary driver grind coatings and paint off of hard floor surfaces to leave a smooth, open, professional finish. Brush skirt and optional vac system enables dust-free operation on all models, and optional, add-on stackable 20, 30 or 35 lb. weights are also available. Spirogrinder machines are well-engineered, sturdy, economical, efficient, and so easy to use that even unskilled personnel can produce expert results.
Gorilla GCT-XE Dustless Joint Saw

$5,928.24
Questions? Call us at (866) 812-6252

Features

Excellent dust control

Front and rear blade pointers

Cable depth adjustment

Integrated wrench holders

1/4" steel frame

Heavy duty bearings

Dual drive belts

2-3" dust port
American Sanders EZ-8 Drum Sander

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you “feather” the drum like the pros. Features:

Heavy duty 1-1/2 hp dual capacitor motor provides power for the most demanding jobs.

Disassembles easily for transport or storage.

Totally enclosed dust free motor eliminates motor cleaning.

40 ft. gray rubber covered power cable provides longer reach.

Rugged cast aluminum construction designed for years of service.

Cimex CR48DF Diamond Finisher

$5,325.00

Questions? Call us at (866) 812-6252

First-Class Floor Polishing.

The Cimex Diamond Finisher allows for successive stages of floor preparation on concrete, marble, granite, terrazzo and stone floors to be completed more rapidly and with less effort than is possible by conventional methods. The three-headed, counter rotating system of our Cimex Diamond Finisher works in tandem with a selection of diamond faced finishing discs. These discs are graded from coarse to fine to accommodate newly laid floors, damaged stone and surface re-polishing. The generous 6.6 gallon solution tank allows for long stretches of uninterrupted usage during wet applications. Thanks to its superior design, the Cimex Diamond Finisher maintains constant pressure on all surfaces. This allows for clean, even cutting without the rotational scoring often found in other floor finishing systems. Also featured is the forward and reverse function. This allows the machine to operate in both directions, ensuring a smooth finish.

American Sanders 3DS Orbital Sanders

Request a Quote

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. When you need the ultimate fine finish, the 3DS Orbital Sander outperforms the competition with three rotating discs that provide cross-grain sanding and efficient dust control. The 3DS is perfect for providing a smooth, flat floor on parquet, herringbone and ornamental pattern wood floors. Features:

(3) 8″ high speed rotating discs eliminate the need for “with grain” sanding.
3 HP fully-enclosed motor requires less maintenance.
Large non-marking tires provide ease of transport.
Vacuum operates independent of sander–performs double duty.
Large dust containment chamber provides longer operation times.

American Sanders Epoch HD Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD is a 230V dual speed, multi-purpose machine with the muscle to handle the toughest floor jobs. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:

230V, 2.5HP motor for loads of low-end torque without overloading household circuits.

Dual speed capability for use with various grits, wood types, and job site conditions.

Removable weight bracket to provide better access to tight spaces.

Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.

Bright, flexible LED light (with replaceable bulb) for improved visibility.

Heavy duty 6” wheels for added stability.

Exclusive tilt-back wheel system protects pad drivers from damage.

Dust control ready.

Durable rigid, low profile skirt contains dust and allows close access to wall lines
Gorilla GCT-XEE Dustless Joint Saw

$5,207.10
Questions? Call us at (866) 812-6252

Features

Excellent dust control

Front and rear blade pointers

Cable depth adjustment

Integrated wrench holders

1/4" steel frame

Heavy duty bearings

Dual drive belts

2-3" dust port

Husqvarna FS 600 E Flat Saw

$5,185.95

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. FS 600 E is a versatile CE-Eurotest certified electric small push floor saw for left and right hand sawing suitable for indoor sawing. Optimised weight and balance to ensure ergonomic working position and zero CO₂ emissions during use. The built in water tank enables to cut without external water supply. Suitable for small sized service and repair jobs for a majority of floor sawing applications.

Cimex R48HD Surface Scarifier

$5,125.00

Questions? Call us at (866) 812-6252

Commercial Grinding Greatness. Comes with (1) 30lb weight The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects. The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios. These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring.

Husqvarna S 36 Dust Extractor

$4,769.56 – $5,039.60

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes.

Novatek Nova-Strip 378

$4,975.00

Questions? Call us at (866) 812-6252

The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles. Features • 378 square inch footprint removes 2-12”x12” in one cycle • Operates off of 110v - 20amp current • Identical controller to the N1026 • Compact design allows easy access to tight spaces. • Heavy duty and light-weight aluminum construction

Edco Magna Trap Single Disc Floor Grinder

$4,664.24

Questions? Call us at (866) 812-6252

GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders

Gorilla GCT-X Dustless Joint Saw

$4,661.40
Questions? Call us at (866) 812-6252

Features

Excellent dust control

Front and rear blade pointers

Cable depth adjustment

Integrated wrench holders

1/4" steel frame

Heavy duty bearings

Dual drive belts

2-3" dust port

BW SB-6 Shot Blaster

Questions? Call us at (866) 812-6252

The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.

Edco 8″ Walk-Behind Scari-Lite Crete-Planer

$4,519.80

Questions? Call us at (866) 812-6252

MODELS: CPL-8E, CPL-8G

8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
8-Inch, 6-Shaft drum accepts carbide and steel cutters
Etch the surface for new coatings
Available in 1.5HP Electric or 5.5HP Gasoline
Comes standard with universal vacuum port hookup
Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane

Edco 20″ Walk Behind Saw – Downcut

$3,108.60 – $4,447.80

Questions? Call us at (866) 812-6252

Model: DS-20 BLADE NOT INCLUDED

20″ Blade Capacity
NEW & Improved throttle cable
Easy turn crank, for lowering and raising blades in and out of cut
Heavy-Duty Anti-Vibration engine mount!
Screw boot belt tensioner prevents frame damage
7-gauge steel blade guard with welded protective segment flap
Heavy-Duty lifting bail for easy loading and unloading
13 HP gasoline engine or 7.5 HP electric options
Heavy-Duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
Solid-Steel lifting handles
High quality molded rubber wheels

American Sanders OBS-18 & OBS-18DC Orbital Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The random-orbital sanding action of the OBS-18 and OBS-18DC removes the scratch patterns left by drum or rotary sanders, leaving a smooth, flat floor ready for refinishing. At 3,600 orbits per minute, the OBS-18 sands faster than any other orbital sander available. With torque-less operation for enhanced operator comfort, the OBS-18 and OBS-18DC are perfect for interim “screen and recoat” and fine finish sanding jobs. Features:

The totally enclosed, fan cooled motor, eliminates overheating and the need for motor cleaning.

Heavy duty cast aluminum main frame and pad driver plate for added strength.

Independent dust pickup fan for effective dust containment (DC model only).

Dust pipe allows for easy attachment of 1-1/2 or 2 inch vacuum hoses for improved dust containment.

Bristle dust skirt to aid in dust containment (not shown).

Transparent molded plug has an internal light that serves as a power indicator (not shown).
Bersi TS3100 H13 HEPA Dust Extractor

$4,200.00

Questions? Call us at (866) 812-6252

110V/2.4KW TS3100 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.
Bersi TS3000 H13 HEPA Dust Extractor

$4,200.00

Questions? Call us at (866) 812-6252

230V/3.6KW TS3000 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.

SPE BEF200N-2A Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

Edco Magna-Trap 7″ Turbo Edge Grinder

$3,895.00

Questions? Call us at (866) 812-6252

Three-position articulating frame adjustment for left angle, right angle or straight position grinding
Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
New & improved tapered roller bearings provide less maintenance and longer life

Gorilla SG-8 Dustless Electric Floor Grinder

$3,818.88

Questions? Call us at (866) 812-6252

The SG-8 is our compact and robust surface grinder with a fixed grinding head allowing for a fast and easy transition to edge grinding. To help facilitate consistent passes and even tool wear, the SG-8 comes equipped with our floating tool driver. The tool driver along with the preset wheel position settings result in extremely smooth operation. Lastly, the 2-position handle provides an ergonomic position and an easy way to transport and store the unit. All of these features are complemented by our powder-coated ¼” steel frame to provide durability, longevity, and reduce harsh vibrations. Proudly made in the USA.
Features

Excellent dust control Self-leveling head

Fixed head for edge grinding 3-segment floating head taper lock system

3-point hold down Built-in transport handles

Built-in tool storage Wrench holder

2″ dust port
American Sanders EZ-Sand Orbital Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-Sand orbital floor sander features a powerful three-motor, triple-head design that allows it to effectively sand large, open areas. At the same time, the compact design makes it easy to sand edges, wall lines and closets. Its modular design allows the handle to quickly separate from the base of the machine, making it incredibly easy to transport to and from any home or job-site. The EZ-Sand is equipped with a self-contained dust collection system or it may be attached to an external dust containment system. Features:

Safety interlock prevents accidental starts.

U-Joint style handle base for easy maneuverability.

Rugged 1.5 inch steel handle tube is chrome plated to prevent corrosion.

Rear mounted dust bag for excellent visibility.

Lifting handle for easy transport.

Die-cast aluminum handle with molded on rubber grips for durability and comfort.

Edco Magna-Trap Turbo Lite Grinder

$3,661.99

Questions? Call us at (866) 812-6252

The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.

Resurfaces hundreds of sq ft per hour
Compatible with EDCO Vortex 200 Vacuum for dust-free working
At only 90lbs it fits inside car trunks when the handlebar is collapsed
Accepts EDCO Magna-Trap® Slide-On Tooling

National DL2000 Dust Collector

$3,589.97

Questions? Call us at (866) 812-6252

The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.

DL2000 Dust Collector, 115 V

SAFETY

Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
Heavy-duty, anti-static collection hose provides durability and safety

PERFORMANCE

Primary filter
State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use

American Sanders Epoch Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Epoch is a dual speed, multi-purpose machine designed to meet the many demands of wood floor sanding. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of adjustment. Features:

Heavy duty 60 amp DC rectified motor to provide more low end torque.

Dual speed capability for use with various grits, wood types, and job site conditions.

Adjustable 25lb weight kit allows for adjustments in sanding aggressiveness.

Bright, flexible LED light for improved visibility.

Ergonomic handle.

Dust control ready.

Durable canvas, low profile skirt contains dust and allows close access to wall lines.
American Sanders AVAC 26 Dust Containment System

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Designed specifically for professional wood floor sanding contractors, the AVAC 26 dust containment system is the perfect mix of power and performance. Its compact design makes it highly portable, and yet it still boasts a large 26 gallon capacity tank with superior filtration capabilities. Its high suction, high filtration, and ease of transport make it the vacuum of choice in the wood floor sanding market. Features:

Dual 2” vacuum ports collect dust from multiple sanding machines.

Clear polycarbonate lid makes it easy to monitor the tank capacity.

50 foot detachable power cord.

26 gallon canister.

Convenient handle for lifting.

Non-marking, heavy duty casters.

Three 800 watt, dual stage motors which run independently of each other.

Uses reusable and disposable filters to capture sanding dust.

High performance filtration. (H.E.P.A. filter is also available as an option)

Husqvarna DE 120 H Dust Extractor

$3,003.12

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. It is designed for use with larger hand-held power-tools, floor and hand grinders, shotblasters, scarifiers and more. Its performance and sturdiness make the DE 120 ideal for demanding, heavy-duty applications. It features a user-friendly HMI and an e-flow function that automatically adjusts air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.

Planing / Scarifying made easy...

MODELS: 2EC-NG, 2GC-NG

Planing / Scarifying made easy...

First-Class Floor Polishing.

Title