Surface Prep Equipment Archives

American Sanders EZ-E Entension Edger

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-E Extension Edger is the perfect tool for tackling the most difficult edging challenges, including toe-kicks and radiators. Available in 8″ and 13″ interchangeable configurations, the EZ-E gives you the reach needed to deliver beautiful results. The EZ-E can be run with the included quick release dust bag or can attach directly to a vacuum and comes with a soft case for storage and transport. Features:

Extension arm allows for reaching under toe-kicks or radiators

Precision-balanced sanding pad produces finer finish.

Powerful 1 hp motor maintains speed under the heaviest cutting conditions.

Rotating dust pipe swivels 210 degrees to allow access to tight spaces and easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment.

Quick release dust bag slides on and off with a simple twist and pull.

Tool-free adjustment of rear casters speeds adjustments.
American Sanders Sander 1600DC Rotary Sander

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Sander 1600 Rotary Sander was designed and innovated specifically for the demands of wood floor sanding and finishing. The added weight and balanced design deliver the most aggressive sanding, highest productivity and smoothest operation of any rotary sander on the market. The Sander 1600 can be used with the American Sanders HydraSand Multi Head Sanding Disc. The HydraSand attachment mounts to any rotary sander and utilizes six 5” pads mounted to a thick steel plate. The steel construction produces a product that is 15% more effective than leading competitive units. Features:

Powerful, fully enclosed, 1.5 hp motor.

Low profile design allows access under cabinets and toe-kicks.

Ergonomic handle.

Super grip pad driver (not shown).

Bright, fluorescent light, for increased visibility.

Durable bristle skirt helps contain dust.

Dust control ready.

Gray, non-marking transport wheels.
American Sanders American B-2+ Edger

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The professional’s choice for 50 years, the B-2+ Edger offers a 3200 RPM setting for fast aggressive cutting and a 2800 RPM setting for greater precision. With a new dust pipe design that allows this machine to be attached directly to a vacuum, as well as a new and innovative quick release bag design, this edger will remain the professional’s preferred machine. Features:

Powerful 1 HP motor maintains speed under heaviest cutting conditions.

Electronically balanced fan and motor for smoother operation.

Long lasting graphite brushes for extended brush and armature life.

Precision balanced sanding pad produces finer finish.

Rotating dust pipe swivels 280 degrees for access to closets and tight spaces.

Innovative quick release dust bag saves time and removes the hassle of strings.

SPE BEF200N-4A Gas Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

National 550 Floor Scraper

$2,818.39

Questions? Call us at (866) 812-6252

Click here for the full National Flooring Equipment catalogue The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more. A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.

Angle-adjustment wheel changes pitch of the blade in seconds
1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
Removable front weight provides additional down pressure and facilitates easy loading/unloading
Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs

American Sanders Epoch Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Epoch is a dual speed, multi-purpose machine designed to meet the many demands of wood floor sanding. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of adjustment. Features:

Heavy duty 60 amp DC rectified motor to provide more low end torque.

Dual speed capability for use with various grits, wood types, and job site conditions.

Adjustable 25lb weight kit allows for adjustments in sanding aggressiveness.

Bright, flexible LED light for improved visibility.

Ergonomic handle.

Dust control ready.

Durable canvas, low profile skirt contains dust and allows close access to wall lines.

Edco 18″ Compact Saw – Downcut

$2,974.90

Questions? Call us at (866) 812-6252

Model: KL-18 BLADE NOT INCLUDED

18″ blade capacity
NEW & Improved throttle cable
Easy turn crank, for lowering and raising blades in and out of cut
Screw boot belt tensioner prevents frame damage
7-gauge steel blade guard with welded protective segment flap
Heavy-Duty lifting bail (optional)
13 HP gasoline engine
Heavy-Duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
High quality molded rubber wheels

Novatek Nova-Strip Eco-Strip 100 115V

$2,995.00

Questions? Call us at (866) 812-6252

The EcoStrip 100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs. and utilizing a 15 amp, 110volt grounded outlet makes this an all around winner. The Ecostrip heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. Features • 196 square inch footprint removes 1 - 12”x12” in one cycle • Operates on 110V -15amp current • Safety sensor shuts down machine if left unattended • Compact design allows easy access to tight including steps and closets • The perfect compliment to the N378 and N1026 models • Heavy duty and light-weight aluminum construction

Husqvarna DE 120 H Dust Extractor

$3,003.12

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. It is designed for use with larger hand-held power-tools, floor and hand grinders, shotblasters, scarifiers and more. Its performance and sturdiness make the DE 120 ideal for demanding, heavy-duty applications. It features a user-friendly HMI and an e-flow function that automatically adjusts air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.

Edco 20″ Walk Behind Saw – Downcut

$3,108.60 – $4,447.80

Questions? Call us at (866) 812-6252

Model: DS-20 BLADE NOT INCLUDED

20″ Blade Capacity
NEW & Improved throttle cable
Easy turn crank, for lowering and raising blades in and out of cut
Heavy-Duty Anti-Vibration engine mount!
Screw boot belt tensioner prevents frame damage
7-gauge steel blade guard with welded protective segment flap
Heavy-Duty lifting bail for easy loading and unloading
13 HP gasoline engine or 7.5 HP electric options
Heavy-Duty 7-gauge steel laser cut frame
Large screw-type depth control
Wide-T handles with rubber grips
Solid-Steel lifting handles
High quality molded rubber wheels

American Sanders AVAC 26 Dust Containment System

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Designed specifically for professional wood floor sanding contractors, the AVAC 26 dust containment system is the perfect mix of power and performance. Its compact design makes it highly portable, and yet it still boasts a large 26 gallon capacity tank with superior filtration capabilities. Its high suction, high filtration, and ease of transport make it the vacuum of choice in the wood floor sanding market. Features:

Dual 2” vacuum ports collect dust from multiple sanding machines.

Clear polycarbonate lid makes it easy to monitor the tank capacity.

50 foot detachable power cord.

26 gallon canister.

Convenient handle for lifting.

Non-marking, heavy duty casters.

Three 800 watt, dual stage motors which run independently of each other.

Uses reusable and disposable filters to capture sanding dust.

High performance filtration. (H.E.P.A. filter is also available as an option)

National DL2000 Dust Collector

$3,589.97

Questions? Call us at (866) 812-6252

The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.

DL2000 Dust Collector, 115 V

SAFETY

Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
Heavy-duty, anti-static collection hose provides durability and safety

PERFORMANCE

Primary filter
State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use

Edco Magna-Trap Turbo Lite Grinder

$3,661.99

Questions? Call us at (866) 812-6252

The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.

Resurfaces hundreds of sq ft per hour
Compatible with EDCO Vortex 200 Vacuum for dust-free working
At only 90lbs it fits inside car trunks when the handlebar is collapsed
Accepts EDCO Magna-Trap® Slide-On Tooling

American Sanders EZ-Sand Orbital Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-Sand orbital floor sander features a powerful three-motor, triple-head design that allows it to effectively sand large, open areas. At the same time, the compact design makes it easy to sand edges, wall lines and closets. Its modular design allows the handle to quickly separate from the base of the machine, making it incredibly easy to transport to and from any home or job-site. The EZ-Sand is equipped with a self-contained dust collection system or it may be attached to an external dust containment system. Features:

Safety interlock prevents accidental starts.

U-Joint style handle base for easy maneuverability.

Rugged 1.5 inch steel handle tube is chrome plated to prevent corrosion.

Rear mounted dust bag for excellent visibility.

Lifting handle for easy transport.

Die-cast aluminum handle with molded on rubber grips for durability and comfort.

Husqvarna CG 200 Floor Scarifier

$3,695.00

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Husqvarna's CG 200 is a highly productive scarifier, designed to remove concrete fast and aggressively. Applications include removing coatings (heavy floor tile mastics and epoxy materials), light or heavy milling, grooving and texturing of walkways to make them slip resistant, removing trip hazards, and levelling misaligned concrete joints and uneven surfaces.

American Sanders OBS-18 & OBS-18DC Orbital Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The random-orbital sanding action of the OBS-18 and OBS-18DC removes the scratch patterns left by drum or rotary sanders, leaving a smooth, flat floor ready for refinishing. At 3,600 orbits per minute, the OBS-18 sands faster than any other orbital sander available. With torque-less operation for enhanced operator comfort, the OBS-18 and OBS-18DC are perfect for interim “screen and recoat” and fine finish sanding jobs. Features:

The totally enclosed, fan cooled motor, eliminates overheating and the need for motor cleaning.

Heavy duty cast aluminum main frame and pad driver plate for added strength.

Independent dust pickup fan for effective dust containment (DC model only).

Dust pipe allows for easy attachment of 1-1/2 or 2 inch vacuum hoses for improved dust containment.

Bristle dust skirt to aid in dust containment (not shown).

Transparent molded plug has an internal light that serves as a power indicator (not shown).
Gorilla SG-8 Dustless Electric Floor Grinder

$3,818.88

Questions? Call us at (866) 812-6252

The SG-8 is our compact and robust surface grinder with a fixed grinding head allowing for a fast and easy transition to edge grinding. To help facilitate consistent passes and even tool wear, the SG-8 comes equipped with our floating tool driver. The tool driver along with the preset wheel position settings result in extremely smooth operation. Lastly, the 2-position handle provides an ergonomic position and an easy way to transport and store the unit. All of these features are complemented by our powder-coated ¼” steel frame to provide durability, longevity, and reduce harsh vibrations. Proudly made in the USA.
Features

Excellent dust control Self-leveling head

Fixed head for edge grinding 3-segment floating head taper lock system

3-point hold down Built-in transport handles

Built-in tool storage Wrench holder

2″ dust port

Edco Magna-Trap 7″ Turbo Edge Grinder

$3,895.00

Questions? Call us at (866) 812-6252

Three-position articulating frame adjustment for left angle, right angle or straight position grinding
Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
New & improved tapered roller bearings provide less maintenance and longer life

SPE BEF200N-2A Electric Scarifier

Request a Quote

Questions? Call us at (866) 812-6252

Rigid, compact design
Quick Lift – Pulls Cutters In/Out of Cut
50mm dust extraction port Dust free when operated with a suitable vacuum
Large diameter wheels for excellent mobility and stability
Welded construction is rigid, strong and lower control
Fine Adjust- Screw type raise and lower control
Firm engine mounting plate
Front wheels protected from debris
Height adjustment at the handle

Bersi TS3000 H13 HEPA Dust Extractor

$4,200.00

Questions? Call us at (866) 812-6252

230V/3.6KW TS3000 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.
Bersi TS3100 H13 HEPA Dust Extractor

$4,200.00

Questions? Call us at (866) 812-6252

110V/2.4KW TS3100 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.

Husqvarna PG 280 Floor Grinder

$4,218.48 – $4,498.28

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas.

Edco 8″ Walk-Behind Scari-Lite Crete-Planer

$4,519.80

Questions? Call us at (866) 812-6252

MODELS: CPL-8E, CPL-8G

8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
8-Inch, 6-Shaft drum accepts carbide and steel cutters
Etch the surface for new coatings
Available in 1.5HP Electric or 5.5HP Gasoline
Comes standard with universal vacuum port hookup
Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane

American Sanders Epoch HD Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD is a 230V dual speed, multi-purpose machine with the muscle to handle the toughest floor jobs. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:

230V, 2.5HP motor for loads of low-end torque without overloading household circuits.

Dual speed capability for use with various grits, wood types, and job site conditions.

Removable weight bracket to provide better access to tight spaces.

Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.

Bright, flexible LED light (with replaceable bulb) for improved visibility.

Heavy duty 6” wheels for added stability.

Exclusive tilt-back wheel system protects pad drivers from damage.

Dust control ready.

Durable rigid, low profile skirt contains dust and allows close access to wall lines

BW SB-6 Shot Blaster

Questions? Call us at (866) 812-6252

The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.

Gorilla GCT-X Dustless Joint Saw

$4,661.40
Questions? Call us at (866) 812-6252

Features

Excellent dust control

Front and rear blade pointers

Cable depth adjustment

Integrated wrench holders

1/4" steel frame

Heavy duty bearings

Dual drive belts

2-3" dust port

Edco Magna Trap Single Disc Floor Grinder

$4,664.40

Questions? Call us at (866) 812-6252

GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders

Husqvarna S 36 Dust Extractor

$4,769.56 – $5,039.60

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes.

Novatek Nova-Strip 378

$4,975.00

Questions? Call us at (866) 812-6252

The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles. Features • 378 square inch footprint removes 2-12”x12” in one cycle • Operates off of 110v - 20amp current • Identical controller to the N1026 • Compact design allows easy access to tight spaces. • Heavy duty and light-weight aluminum construction

Cimex R48HD Surface Scarifier

$5,125.00

Questions? Call us at (866) 812-6252

Commercial Grinding Greatness. Comes with (1) 30lb weight The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects. The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios. These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring.

American Sanders Epoch HD-20 Rotary Sanders

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD-20 is a 20” version of the famed 230V dual speed Epoch HD. This multi-purpose machine delivers power and productivity. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand 20, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:

230V, 2.5HP motor for loads of low-end torque without overloading household circuits.

Dual speed capability for use with various grits, wood types, and job site conditions.

Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.

Removable weight bracket to provide better access to tight spaces.

Bright, flexible LED light (with replaceable bulb) for improved visibility.

Exclusive tilt-back wheel system protects pad drivers from damage.

Dust control ready.

Durable rigid, low profile skirt contains dust and allows close access to wall lines

With HydraSand 20 compared to traditional 20” planetary head:

32% less amp draw

14% more aggressive cut.

Husqvarna FS 600 E Flat Saw

$5,185.95

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. FS 600 E is a versatile CE-Eurotest certified electric small push floor saw for left and right hand sawing suitable for indoor sawing. Optimised weight and balance to ensure ergonomic working position and zero CO₂ emissions during use. The built in water tank enables to cut without external water supply. Suitable for small sized service and repair jobs for a majority of floor sawing applications.

Gorilla GCT-XEE Dustless Joint Saw

$5,207.10
Questions? Call us at (866) 812-6252

Features

Excellent dust control

Front and rear blade pointers

Cable depth adjustment

Integrated wrench holders

1/4" steel frame

Heavy duty bearings

Dual drive belts

2-3" dust port

American Sanders 3DS Orbital Sanders

Request a Quote

Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. When you need the ultimate fine finish, the 3DS Orbital Sander outperforms the competition with three rotating discs that provide cross-grain sanding and efficient dust control. The 3DS is perfect for providing a smooth, flat floor on parquet, herringbone and ornamental pattern wood floors. Features:

(3) 8″ high speed rotating discs eliminate the need for “with grain” sanding.
3 HP fully-enclosed motor requires less maintenance.
Large non-marking tires provide ease of transport.
Vacuum operates independent of sander–performs double duty.
Large dust containment chamber provides longer operation times.

Cimex CR48DF Diamond Finisher

$5,325.00

Questions? Call us at (866) 812-6252

First-Class Floor Polishing.

The Cimex Diamond Finisher allows for successive stages of floor preparation on concrete, marble, granite, terrazzo and stone floors to be completed more rapidly and with less effort than is possible by conventional methods. The three-headed, counter rotating system of our Cimex Diamond Finisher works in tandem with a selection of diamond faced finishing discs. These discs are graded from coarse to fine to accommodate newly laid floors, damaged stone and surface re-polishing. The generous 6.6 gallon solution tank allows for long stretches of uninterrupted usage during wet applications. Thanks to its superior design, the Cimex Diamond Finisher maintains constant pressure on all surfaces. This allows for clean, even cutting without the rotational scoring often found in other floor finishing systems. Also featured is the forward and reverse function. This allows the machine to operate in both directions, ensuring a smooth finish.

American Sanders EZ-8 Drum Sander

Request a Quote
Questions? Call us at (866) 812-6252

*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you “feather” the drum like the pros. Features:

Heavy duty 1-1/2 hp dual capacitor motor provides power for the most demanding jobs.

Disassembles easily for transport or storage.

Totally enclosed dust free motor eliminates motor cleaning.

40 ft. gray rubber covered power cable provides longer reach.

Rugged cast aluminum construction designed for years of service.
Gorilla GCT-XE Dustless Joint Saw

$5,928.24
Questions? Call us at (866) 812-6252

Features

Excellent dust control

Front and rear blade pointers

Cable depth adjustment

Integrated wrench holders

1/4" steel frame

Heavy duty bearings

Dual drive belts

2-3" dust port
Lite Prep SG-20 Spyrogrinder

Request a Quote

Questions? Call us at (866) 812-6252

Comes with (2) 30lb weights

With A working width of 20” and a wide range of grinding, sanding, polishing, and scraping attachments, the Spirogrinder series is highly versatile and delivers excellent results on a wide variety of floor surfaces including marble, terrazzo, stone and concrete. All Spirogrinder machines may be used for wet or dry applications, and the VS models offer complete control over operating speed. Three specially designed rotating heads mounted on a counter-rotating planetary driver grind coatings and paint off of hard floor surfaces to leave a smooth, open, professional finish. Brush skirt and optional vac system enables dust-free operation on all models, and optional, add-on stackable 20, 30 or 35 lb. weights are also available. Spirogrinder machines are well-engineered, sturdy, economical, efficient, and so easy to use that even unskilled personnel can produce expert results.

National DL3000 Dust Collector

$6,045.06

Questions? Call us at (866) 812-6252

The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.

DL3000 Dust Collector, 230 V

SAFETY

Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use

PERFORMANCE

Primary filter
Heavy-duty, anti-static collection hose provides durability and safety

BW SC-12 Scarifier Head Attachment (for SCB-1200)

Questions? Call us at (866) 812-6252

BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one-handed operation controls for raising and lowering heads, and easy to turn manual steering were designed with the contractor in mind. The SC-12 Scarifying Head attachment is a state of the art design that is self-leveling, automatically adjusting itself to different contours of the floor or pavement. You will achieve an accurate removal of thin mill coatings to 1/4” overlays. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages you can go from steel to carbide cutters as well as different cage widths in minutes. The SCB-1200 with SC-12 Scarifier Head Attachment will put you ahead of the competition with its faster production rates, and a vacuum collector system that eliminates dust and removes all material from the scarified surface.

Rubber Membrane Removal
Concrete Milling
Line Striping
Bridge and Parking Decks