The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used.
NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight!
Multi-Vac port for use with 2″ or 3″ vacuum hose
22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts
Gas & electric power options availableIncludes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories
Counter-rotating discs prevent machine from pulling side to side and give operator greater control
6 grinding accessories required per loading
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
PG 450 is a versatile and user-friendly planetary floor grinder. Perfect for a wide range of applications, e.g. coating removal, concrete grinding and concrete polishing. It is ideal for rental and both professional and semi-professional applications due to its many self-adjusting benefits.
Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
SAFETY
Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine
COMFORT
Fully adjustable handle accommodates a range of operating positions
PERFORMANCE
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
PG 400 is a versatile and very productive single disc floor grinder for a wide range of applications. With its 400 mm wide grinding width it efficiently grinds adhesives, paint, epoxy and spackle on medium to large concrete areas.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
Husqvarna introduces the first petrol/gas driven floor grinder in the PG range. PG 400 Petrol is a versatile and very productive single disc floor grinder for a wide range of outdoor applications. With its 400 mm wide grinding width it efficiently grinds lippage in concrete slabs, trip hazards, removal of paint, epoxy and spackle on medium to large concrete areas.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BG 250 is a single disc concrete grinder designed for heavy duty surface preparation applications. BG 250 is very easy and comfortable to use with low vibrations. Thanks to its two front handles, it is possible to lift the machine up a flight of stairs. BG 250 has an asymmetric dust exhaust with a built-in deflector for improved/optimised dust extraction. In addition, it is equipped with a special drive system for optimum load distribution.
Click here for the full National Flooring Equipment catalogue
This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces.
Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
Removable 49-pound saddle weight helps increase or decrease down pressure and traction
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The BG 250P is a petrol-powered grinder designed to give you all the functionality and versatility you need for a wide range of surfaces. With a single grinding head, this machine focuses all its pressure onto a single diamond disc for more effective and aggressive grinding. The BG 250P is ideal for applications requiring heavy duty surface preparation of small to medium sized floors such as surface levelling, the removal of coating defects and adhesives, preparation before coating and much more. Other applications include industrial flooring, concrete preparation and decontamination. This machine is easy to transport and its 3 in diameter dust hose connection manages dust more efficiently, for a safer work environment. Without the need for power cables, you can also enjoy greater mobility on job sites and make more of your time count.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BS 75 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. This machine has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor stripper requires almost no maintenance. In addition, this floor scraper can be disassembled into 3 pieces for easy transportation up flights of stairs and into vehicles. It is also possible to add an additional 10 kg weight to mount on the weight block in order to make BS 75 more efficient on resilient floors. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC 270 EG is a professional edge grinding machine allowing you to grind and polish edges quickly, efficiently and in an ergonomic manner. Instead of working in an uncomfortable position, grinding edges with handheld equipment, this machine makes it possible to tackle edges just as any other part of the floor, standing upright and progressing fast. Every step of the grinding and polishing process can be followed by mounting the same tools under the HTC 270 edge grinder as under the main floor grinder. The high head pressure and ingenious design (which allows for both left and right edge grinding) has earned praise from floor grinding specialists around the world. Additionally the low grinding head height of only 100 mm, enables grinding under shelves or other low-hanging obstacles. The floating cover follows the floor at all times and transportation is easy thanks to the detachable chassis.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The FloorCrafter upholds a long tradition of providing precision instruments to a craftsman’s trade. The FloorCrafter, engineered to be the most aggressive belt machine in the industry, was also designed to provide reduced vibration. Its cutting ability allows the hardwood sanding professional the ability to increase production while achieving perfect results. With the patented Dolly Transport system, the FloorCrafter is truly a unique and innovative approach to hardwood floor sanding.
Features:
Precision balanced drum with machined spiral cooling slots.
Patented one-tool leveling adjustment.
Recessed drum door provides better air seal and eases abrasive installation and adjustments.
Patented Dolly Transport System eases transport to and from job sites.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The Blastrac 1-8DM is a portable, lightweight shot blasting system that runs on single phase common power and is perfect for smaller jobs such as residential garage floors, pool decks and small industrial floors. The machine is pushed forward with manual travel speed and has an 8.75 inch blast pattern making it capable of reaching corners and small spaces.
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The heavy-duty dust collection system is remarkably quiet and designed for multi-purpose use with medium to large grinding and polishing machines. The vertical profile is compact and offers great maneuverability with large wheels and two swiveling/locking casters. The ergonomic design also features easily accessible components for care and maintenance.
The BDC-33 is an advanced unit that helps eliminate most all of the airborne dust and particulate generated with grinding and polishing equipment. The PPT is equipped with a wheeled dust-bin that dismounts smoothly for quick debris disposal and with a capacity of 143 lbs. make those efforts infrequent. The BDC-33 dust collector is equipped with the Longopac® bagging system and is perfect for a clean disposal. This powerful industrial vacuum is also perfect for contractors who must utilize a system that satisfies environmental concerns.
Compact unit is easy to maneuver
Fully automatic self-cleaning system for prolonged filter life
The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal.
This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.
Features & Benefits
• 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle
• Ceramic coated heat panel provides long life and durability
• Computerized control systems guarantee precise and dependable operation
• 100% solid state electronics. No mechanical relays or solenoids
• Rapid heat up and cool down
• Powder coated aluminum is durable and light-weight
• Triple redundant safety features for operator safety
• Integrated temperature indicator allows for monitoring of panel base
• Operate on standard 220v, 50amp service eliminating external buck boosters”
• 12v DC controls allow for safe, cool operation and long life
• Case grounded for added safety
The DG-25 Diamond Grinder/Polisher is designed for coating removal to high gloss polishing on totally dry concrete. A rubber mounted grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200-K, while removing all material off the surface and reducing cleanup costs and effort. With twin, one piece 16” rubber mounted, belt driven grinding heads that are adjusted up and down using air pressure, giving you infinite adjustability.. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing.
The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors.
Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class.
The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BS 110 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. BS 110 has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor scraper requires almost no maintenance to keep running at peak performance. BS 110 has a standard transport wheel on the front of the machine for ease of transportation on and off sites. It is a very quiet machine that is easy to operate with minimum vibrations. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.
Remove traffic lines from asphalt – and get the job done quickly!
EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones.
Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
Click here for the full National Flooring Equipment catalogue
The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more.
The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Transport-wheel rack hanger on back of handle
Adjustable wheel scrapers prevent material buildup during operation
Patented isolator overtravel design ensures safety on the toughest jobs
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The American 8 & 12 Drum Sanders are the worldwide benchmark for professional drum sanding equipment. Its rugged cast aluminum construction, powerful motor and unique operating and drum leveling controls combine to make the most aggressive and most productive drum sander available.
Features:
Totally enclosed 7.5 HP (peak) motor runs cooler and eliminates internal dust build-up.
Drum Pressure Control allows infinite pressure variation for all types of wood.
Heavy-duty vacuum fan and high filtration dust bag provide efficient dust recovery and containment.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The American 8 & 12 Drum Sanders are the worldwide benchmark for professional drum sanding equipment. Its rugged cast aluminum construction, powerful motor and unique operating and drum leveling controls combine to make the most aggressive and most productive drum sander available.
Features:
Totally enclosed 7.5 HP (peak) motor runs cooler and eliminates internal dust build-up.
Drum Pressure Control allows infinite pressure variation for all types of wood.
Heavy-duty vacuum fan and high filtration dust bag provide efficient dust recovery and containment.
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing.
SAFETY
Dual rear vacuum ports
Removable handle and weights for easy transport
COMFORT
Three-part adjustable angle handle
PERFORMANCE
Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
Variable speed control
Flip-style weights for added or decreased head pressure
18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The PG 540 (5.5 hp / 4.0 kW) is a powerful, compact and versatile planetary floor grinder perfect for smaller jobs. Available in both single phase and three phase. It combines a smart compact design for easy transportation with real work-horse performance and sheer grinding power. Thanks to the split-chassis design, the PG 540 fits in most standard cars.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMG 555P is a propane-driven planetary grinder that is designed for horizontal surface preparation of applications covering a variety of sizes. This is an ideal machine for the removal of coatings, concrete grinding and polishing applications. BMG 555P uses a 3 in diameter dust hose connection and a floating shroud to manage dust more efficiently, for a safer work environment. Thanks to its water tank, BMG 555 can also be used for wet grinding and polishing applications. Without the need for power cables, you can also enjoy greater mobility on job sites to make more of your time count.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC D60 is a specifically designed dust extractor for high-performance floor grinding with its remote connection to the floor grinders with Duratiq Technology. A large LCD display provides information about critical data needed for optimal dust extraction – air flow, under-pressure and filter status. An auto-purge function is available as an option to clean the filters via the remote control of the grinders (with Duratiq Technology). Remotely connect your grinder with Duratiq Technology (most suitably HTC 6) to start and stop operation, clean the filter and receive important notifications on the display of your grinder or remote control unit, all so that you can focus on the floor and ultimately save time and money.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The Husqvarna BMS-220P ride-on scraper is ideally suited for medium and large sized applications. Works well on all applications such as hardwood parquet, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles, etc.
The BMS-280P is one of the quickest, most agile and highly productive ride-on floor scrapers designed for large area surface removal. The BMS-280P significantly reduces the amount of time and effort required to remove a wide variety of thick coatings, floor coverings and waterproofing membranes. Everything from carpet and tough ceramic tile to hardwood and VCT are no match for this machine
1 Available Please contact us for delivery and lead timesClick here for the full National Flooring Equipment catalogue
The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Design incorporates nine isolators for the toughest jobs
Patented isolator overtravel design ensures safety on the toughest jobs
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC T5 is the smallest machine in the range of grinders with Duratiq technology. This is an ultra-compact and powerful planetary grinder with three grinding discs suitable for all types of grinding jobs and is available with either a 2.2 or 4 kW motor version. Just as the large models with Duratiq Technology, the machine is equipped with an intuitive digital control panel that provides all the control and precision you need to maximise machine performance. The dustproof design of the grinding head and electrical cabinet, along with the precision of the heavy duty components, provides high reliability and increased grinding precision. The chassis can be easily separated from the grinding head and weights dismounted prior to transport.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMG 555 is a triple disc grinder designed for horizontal surface preparation in applications for a wide range of sizes. This is an ideal machine for the removal of coatings, concrete grinding and polishing applications. The BMG 555 uses a 3 in diameter dust hose connection and a floating shroud to manage dust more efficiently, for a safer work environment. A smart easy-to-use control screen gives the operator useful information such as amperage draw, true in line voltage RPM and direction indication.