For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world.
Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system.
Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs.
Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model).
Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
The 300BU is a battery operated Ultra-High Speed (“UHS”) burnisher that rapidly produces high levels of gloss on VCT, polished concrete and other hard floor surfaces. The 300BU features SteadyOne™ pad control technology that dramatically improves the performance and life span of burnishing pads while producing excellent single-pass results. This powerful burnisher is available in 20″, 24″, 27″, 28″, and 30″ models.
The 300BU comes with a dust control filter system for clean, quiet and efficient burnishing. Powered by three 12-volt 228 AH batteries, the 300BU can burnish over 26,000 square feet per hour (2400 square meters) and producing only 67 decibels of soft noise. Clean, safe and effective, the 300BU is a burnisher you can count on to maintain floors at any hour in any facility.
Do you ever get inconsistent results with your battery burnisher? It may be because your burnisher doesn’t have the ability to adjust to changing conditions. The 300BU does. With Steadyone Technology built into every 300BU, the burnishing head automatically adjusts to changing floor conditions and changing pad conditions, producing consistent results every time. Exclusive to the 300BU, this “smart” adjustment produces great results – fast – in just a single pass.
SteadyOne™ uses advanced fluid drive technology to maintain constant pad pressure and produce more consistent results. Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today … and tomorrow.
Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition.
TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing.
SAFETY
Dual rear vacuum ports
Removable handle and weights for easy transport
COMFORT
Three-part adjustable angle handle
PERFORMANCE
Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
Variable speed control
Flip-style weights for added or decreased head pressure
18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
SAFETY
Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine
COMFORT
Fully adjustable handle accommodates a range of operating positions
PERFORMANCE
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed
The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
DL2000 Dust Collector, 115 V
SAFETY
Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
Heavy-duty, anti-static collection hose provides durability and safety
PERFORMANCE
Primary filter
State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
DL3000 Dust Collector, 230 V
SAFETY
Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
PERFORMANCE
Primary filter
Heavy-duty, anti-static collection hose provides durability and safety
The GP3000 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor. The 28-inch cleaning path and increased grinding head pressure make this an ideal machine for commercial and industrial projects.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 20-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
The new and improved GP700 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Forward/rear locking pitch-adjustable axle that allows the operator to change the angle of the head pressure from the front to the back to compensate for inclines/declines on uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 7-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
Click here for the full National Flooring Equipment catalogue
This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
21-inch nonmarking tires
Compact design fits through standard door frames and elevator doors
Hydraulic brake system automatically engages when the machine is in the off position
Front caster wheels allow increased maneuverability in tight spaces position
Improved exhaust system meets federal OSHA regulations
Click here for the full National Flooring Equipment catalogue
Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
Nonmarking tires
AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
Compact design fits through standard door frames and elevator doors
Heavy-duty 3000 PSI wheel motors
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions.
5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated.
5700HS: Designed to cover more space in less time; specifications made to order.
Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Nonmarking tires
Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
Compact design fits through standard door frames and elevators doors
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces.
Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
Removable 49-pound saddle weight helps increase or decrease down pressure and traction
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Click here for the full National Flooring Equipment catalogue
The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more.
A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.
Angle-adjustment wheel changes pitch of the blade in seconds
1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
Removable front weight provides additional down pressure and facilitates easy loading/unloading
Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
1 Available Please contact us for delivery and lead timesClick here for the full National Flooring Equipment catalogue
The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Design incorporates nine isolators for the toughest jobs
Patented isolator overtravel design ensures safety on the toughest jobs
Click here for the full National Flooring Equipment catalogue
The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more.
The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Transport-wheel rack hanger on back of handle
Adjustable wheel scrapers prevent material buildup during operation
Patented isolator overtravel design ensures safety on the toughest jobs
Click here for the full National Flooring Equipment catalogue
The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs.
This is a special order machine. Please contact us for more information and lead times.
Additional carts, power packs and chargers are available for purchase if you require longer run times.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head
Extra weight compartments
Larger/deepened forklift pockets
Nonmarking tires
Trailer hitch
Flip-up back lid for quick and easy battery changing
Front debris deflector protects machine from loose material
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Larger/deepened forklift pockets
Nonmarking tires
Compact design fits through standard door frames and elevator doors
Improved exhaust system meets federal OSHA regulations
Front caster wheels allow increased maneuverability in tight spaces
12-volt LED light for increased visibility on the jobsite
Remove traffic lines from asphalt – and get the job done quickly!
EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones.
Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
Factory Cat's Floor Sweepers sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.
The Factory Cat model TR's design was built from the success of our Model 34 walk behind sweeper. The TR's side brooms sweep up dirt in the corners while a huge tubular sweeping broom under the machine sweeps up the dirt and debris from the floor and packs it into the steel hopper. Meanwhile, the second stage vacuums up the dust and traps it in a polypropylene felt "baghouse" filter. Factory Cat's Industrial floor sweepers can pick up whole bags of cement at a time without leaving a trace of dust behind.