Industrial Cleaning & Surface Preparation Equipment Specialists (866) 662-6710
FacebookLinkedInXYouTube

Surface Prep Equipment

Commercial floor preparation machines for sale.

Shop all makes and models of surface prep equipment for flooring and hard surfaces. Free shipping on select products. For assistance in choosing the right machine, please call us at (866) 812-6252. Trade-ins welcome and we offer competitive financing for qualified customers.
  • Novatek 12 InLine Chisel Scaler for sale

    Novatek 12 InLine Chisel Scaler

    $299.00

    Questions? Call us at (866) 812-6252

    Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our smallest, most compact inline scaler • Powerful and light-weight • All steel components offer durability and long-life • 3800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 12CS100 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 12 InLine Needle Scaler for sale

    Novatek 12 InLine Needle Scaler

    $299.00

    Questions? Call us at (866) 812-6252

    Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our smallest, most compact inline scaler • Powerful and light-weight • All steel components offer durability and long-life • 3800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds12NS100 -Needle Scalers • Equipped with 12pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Oval front tube concentrates needles • Sliding oval front tube adjusts for needle wear
  • Novatek 19 InLine Chisel Scaler for sale

    Novatek 19 InLine Chisel Scaler

    $299.00

    Questions? Call us at (866) 812-6252

    Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits
    • Powerful, light-weight and compact inline scaler • All steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    19CS100 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 19 Pistol Grip Chisel Scaler

    Novatek 19 Pistol Grip Chisel Scaler

    $299.00

    Questions? Call us at (866) 812-6252

    The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most compact pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    19CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 19 Inline Needle Scaler

    Novatek 19 Inline Needle Scaler

    $299.00

    Questions? Call us at (866) 812-6252

    Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Powerful, light-weight and compact inline scaler • All steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 19NS100 -Needle Scalers • Equipped with 19pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Oval front tube concentrates needles • Sliding oval front tube adjusts for needle wear
  • Novatek 19 Pistol Grip Needle Scaler

    Novatek 19 Pistol Grip Needle Scaler

    $299.00

    Questions? Call us at (866) 812-6252

    The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most compact pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    19CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 28 Pistol Grip Chisel Scaler

    Novatek 28 Pistol Grip Chisel Scaler

    $349.00

    Questions? Call us at (866) 812-6252

    The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek Heavy Duty Single Scaling Hammer - Long Handle

    Novatek Heavy Duty Single Scaling Hammer – Long Handle

    $371.00

    Questions? Call us at (866) 812-6252

    Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seal cleans piston on every stroke • Brush seal technology helps extend piston life • Screw top cap for simple head and piston replacement • Single piece piston and tips assure durability
  • Novatek Heavy Duty Single Scaling Hammer - Short Handle

    Novatek Heavy Duty Single Scaling Hammer – Short Handle

    $371.00

    Questions? Call us at (866) 812-6252

    Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seal cleans piston on every stroke • Brush seal technology helps extend piston life • Screw top cap for simple head and piston replacement • Single piece piston and tips assure durability
  • Novatek 28 Pistol Grip Super Scraper Scaler

    Novatek 28 Pistol Grip Super Scraper Scaler

    $379.00

    Questions? Call us at (866) 812-6252

    The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 28PG Vibration Reduced Needle Scalers

    Novatek 28PG Vibration Reduced Needle Scalers

    $449.00

    Questions? Call us at (866) 812-6252

    The 28PG Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels.  The 28PG VRS scalers are our most powerful pistol grip vibration scalers.These models significantly decreases the posibility of vibration related injuries. All the power with less vibration. Features & Benefits • Our most compact, pistol grip vibration reduced scaler • Pistol grip configuration is ergonomic and comfortable • Steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration • Operator safety and comfort VRS028NPG -Pistol Grip Needle Scalers • Equipped with 28pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Tool-less needle replacement for easy field replacement • Dust collection shrouds available
  • Novatek 19 Inline Needle Scaler Kit

    Novatek 19 Inline Needle Scaler Kit

    $499.00

    Questions? Call us at (866) 812-6252

    Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Powerful, light-weight and compact inline scaler • All steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 19NS100 -Needle Scalers • Equipped with 19pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Oval front tube concentrates needles • Sliding oval front tube adjusts for needle wear
  • Novatek 19 Pistol Grip Needle Scaler Kit

    Novatek 19 Pistol Grip Needle Scaler Kit

    $499.00

    Questions? Call us at (866) 812-6252

    The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most compact pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 3000 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    19CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 19PG Vacuum Shrouded Needle Scaler Package

    Novatek 19PG Vacuum Shrouded Needle Scaler Package

    $499.00

    Questions? Call us at (866) 812-6252

    Novatek's vacuum shrouded "VSE" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. Our VSE scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Features • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • Steel components offer durability and long-life • 2mm Flat & 3mm Flat or chisel Tip Needles available Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors 19SVSE120 -Needle Scalers • Equipped with 19pcs -3mm x 7" chisel tip needles • 3000 blows per minute • 2mm Optional Needle Holders available • Lighter in weight for longer run times
  • Novatek 2 ft. Steel Long Reach Scaler

    Novatek 2 ft. Steel Long Reach Scaler

    $499.00

    Questions? Call us at (866) 812-6252

    Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Steel Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
  • Novatek 5 ft. Steel Long Reach Scaler

    Novatek 5 ft. Steel Long Reach Scaler

    $499.00

    Questions? Call us at (866) 812-6252

    Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Steel Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
  • Novatek 5 ft. Aluminum Long Reach Scaler

    Novatek 5 ft. Aluminum Long Reach Scaler

    $499.00

    Questions? Call us at (866) 812-6252

    Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Aluminum Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel internal components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
  • Novatek 28 Pistol Grip Needle Scaler Kit

    Novatek 28 Pistol Grip Needle Scaler Kit

    $525.00

    Questions? Call us at (866) 812-6252

    The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 19 Inline Chisel Vibration Reduced Scaler

    Novatek 19 Inline Chisel Vibration Reduced Scaler

    $526.00

    Questions? Call us at (866) 812-6252

    The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels.  The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration. Features & Benefits
    • Our most compact vibration reduced scaler • Inline configuration allows for access of tight areas • Steel components offer durability and long-life • 2400 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration. • Operator safety and comfort VRS019CS -Inline Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 19 Inline Needle Vibration Reduced Scaler

    Novatek 19 Inline Needle Vibration Reduced Scaler

    $526.00

    Questions? Call us at (866) 812-6252

    The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels.  The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration. Features & Benefits
    • Our most compact vibration reduced scaler • Inline configuration allows for access of tight areas • Steel components offer durability and long-life • 2400 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds • Dramatic decrease in vibration. • Operator safety and comfort VRS019NS -Inline Needle Scalers • Equipped with 19pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Tool-less needle replacement for easy field replacement • Dust collection shrouds available
  • Metabo 7 inch Surface Preparation Kit Angle Grinder (US606467800)

    Metabo 7″ Surface Preparation Kit Angle Grinder (US606467800)

    $538.10

    Questions? Call us at (866) 812-6252

    • Metabo safety switch prevents unintentional start-up
    • Tool-free adjustable guard; twist-proof
    • Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health
    • Side handle can be mounted at three positions
    • Swivelling main handle: high safety and better handling when cutting
    • Auto-stop carbon brushes to protect the motor
  • Novatek 28 Pistol Grip Needle Kit Super Scraper

    Novatek 28 Pistol Grip Needle Kit Super Scraper

    $549.00

    Questions? Call us at (866) 812-6252

    The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
    Features & Benefits • Our most powerful pistol grip scaler • Powerful and light-weight • All steel components offer durability and long-life • 2200 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds
    28CS120 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 5 ft. Aluminum Long Reach Scalers with Needle Attachment

    Novatek 5 ft. Aluminum Long Reach Scalers with Needle Attachment

    $549.00

    Questions? Call us at (866) 812-6252

    Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Aluminum Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel internal components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
  • Novatek 5 ft. Steel Long Reach Scalers with Needle Attachment

    Novatek 5 ft. Steel Long Reach Scalers with Needle Attachment

    $549.00

    Questions? Call us at (866) 812-6252

    Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. Features & Benefits • Heavy-duty steel ball retainer • Rugged Steel Construction • Padded comfort grip • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor • Long Reach Needle Scalers equipped with 28-3mm chisel tip needles • Sliding front tube adjusts for needle wear
  • Novatek Shrouded Heavy Duty Single Scaling Hammer - Long Handle

    Novatek Shrouded Heavy Duty Single Scaling Hammer – Long Handle

    $557.00

    Questions? Call us at (866) 812-6252

    Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
    Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
    Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life
  • Novatek Shrouded Heavy Duty Single Scaling Hammer - Short Handle

    Novatek Shrouded Heavy Duty Single Scaling Hammer – Short Handle

    $557.00

    Questions? Call us at (866) 812-6252

    Novatek’s Shrouded Single Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containment is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Shrouded Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
    Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
    Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life
  • Novatek 12 InLine Needle and Chisel Scaler

    Novatek 12 InLine Needle and Chisel Scaler

    $573.00

    Questions? Call us at (866) 812-6252

    Novatek's Inline Needle & Chisel Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Vibration Reduced scalers (VRS) offer similiar impact and functionality as our standard scalers but with dramatically reduced vibration levels providing more operator safety along with further comfort.
    Features & Benefits • small lightweight compact scalers • 2200-3800 blows per minute gives maximum performance • 2mm, 3mm Flat or 3mm chisel Tip Needles (Needle Scaler Models} • 3/4", 1", 2", 3" heavy duty 1/2" square shank chisels (Chisel Scaler Models) • Steel components offer durability and long-life • Low air consumption allows for use on small, portable compressors • Converts to either a chisel or needle scaler in seconds
  • Novatek 35 Chisel Scaler

    Novatek 35 Chisel Scaler

    $632.00

    Questions? Call us at (866) 812-6252

    The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our most powerful offset scaler • Powerful and light-weight • All steel components offer durability and long-life • 1800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 35CS100 -1/2" Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek Heavy Duty Triple Scaling Hammers - Long Handle

    Novatek Heavy Duty Triple Scaling Hammers – Long Handle

    $639.00

    Questions? Call us at (866) 812-6252

    Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seals clean pistons on every stroke • Brush seal technology to extend piston life • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
  • Novatek Heavy Duty Triple Scaling Hammers - Short Handle

    Novatek Heavy Duty Triple Scaling Hammers – Short Handle

    $639.00

    Questions? Call us at (866) 812-6252

    Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals. Proven to be the choice for “fracturing” these thicker, tough to remove materials. Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads • Nylon brush seals clean pistons on every stroke • Brush seal technology to extend piston life • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
  • Novatek ERGO Steel Long Reach Scaler

    Novatek ERGO Steel Long Reach Scaler

    $644.00

    Questions? Call us at (866) 812-6252

    Novatek's "Ergo" ergonomic designed Long Reach  has a unique "S" shape designed to reduce back strain. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials and much more with our chisel and scraper attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. To help save on backaches, try utilizing our ergonomically designed Python Long Reach. Features & Benefits • Curved steel configuration for added comfort • Vibration reducing top handle standard • Nylon shoulder strap for operator comfort and reducing operator fatigue • Heavy-duty steel ball retainer • 2200 Blows per minute of hitting power • All steel components offer durability and long life • Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets • 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics • Easily converts to a long reach scraper or needle scaler in seconds • Efficient, using only 5 SCFM of compressed air • Runs off a portable compressor
  • National 3420 7 inch Hand Held Grinder for sale

    National 3420 7″ Hand Held Grinder

    $652.56

    Questions? Call us at (866) 812-6252

    Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal. SAFETY
    • Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
    • Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud
    COMFORT
    • Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue
    PERFORMANCE
    • Accommodates multiple styles of diamond turbo cup wheels
  • Novatek 19PG Vacuum Shrouded Needle Scaler Kit

    Novatek 19PG Vacuum Shrouded Needle Scaler Kit

    $775.00

    Questions? Call us at (866) 812-6252

    Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 2200-3000 blows per minute gives maximum performance • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • Steel components offer durability and long-life • 2mm Flat & 3mm Flat or chisel Tip Needles available • Vibration dampening technology (VRS Models) • Tool-less needle change out (VRSModels) Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Works on irregular surfaces • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors
  • American Sanders AVAC 12-P Dust Containment System

    American Sanders AVAC 12-P Dust Containment System

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. High Performance Mid-Size Dust Containment System The AVAC 12-P vacuum offers high suction and exceptional filtration. A powerful 1200 watt, 2-stage motor provides a robust 131 CFM of air flow. The 16 gallon tank allows for a full 12 gallons of dust collection. Designed with non-marking gray wheels and casters, as well as a center mount locking inlet, the vacuum easily follows the operator while he/she works. Features:
    • Non-marking front caster wheels allow the vacuum to easily follow the operator.
    • Easy access latches provide quick removal of the vac head.
    • 16 gallon tank allows for full 12 gallons of dust collection.
    • Center mount locking inlet securely fastens hose to the vacuum.
  • Novatek 28PG Vibration Reduced Needle Scaler Package

    Novatek 28PG Vibration Reduced Needle Scaler Package

    $830.00

    Questions? Call us at (866) 812-6252

    Novatek's shrouded vibration reduced "VRS" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. The VRS scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Features • Vibration dampening technology • Tool-less needle change out • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • 2mm Flat & 3mm Flat or chisel Tip Needles available Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors 28NSVSE110 -Needle Scalers • Equipped with 28pcs -3mm x 7" chisel tip needles • 2200 blows per minute • 2mm Optional Needle Holders available • More power for faster production times
  • Novatek Shrouded Heavy Duty Triple Scaling Hammers - Long Handle

    Novatek Shrouded Heavy Duty Triple Scaling Hammers – Long Handle

    $876.00

    Questions? Call us at (866) 812-6252

    Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
    Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
    Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
  • Novatek Shrouded Heavy Duty Triple Scaling Hammers - Short Handle

    Novatek Shrouded Heavy Duty Triple Scaling Hammers – Short Handle

    $876.00

    Questions? Call us at (866) 812-6252

    Novatek’s Shrouded Triple Head Scaling Hammers, in several distinct versions, are ideal tools to complement our shrouded needle scalers in more demanding applications for surface preparation and coatings removal where dust containement is required. Shrouded Heavy duty Scaling Hammers, have proven to be the choice for “fracturing” thicker, tough to remove materials from concrete or steel. Scaling Hammers are fitted with Tungsten Carbide tipped cruciform heads but can be fitted with Tungsten Carbide tipped bush hammer heads as an option.
    Our Shrouded Triple Scaling Hammers can be converted to an in-line configuration for hard-to-reach areas by simply exchanging the side handle for the main handle. Scaling Hammers use Tungsten Carbide single piece piston-head combinations for the preparation of steel or concrete surfaces.
    Features benefits
    • Hard hitting / fractures coatings • 2500 blows per minute per piston • Tungsten Carbide Bush Hammer or Cruciform heads • Nylon brush seals clean pistons on every stroke • Screw top cap for simple head and piston replacement • Single pieces piston and tip assures durability • Brush seal technology to extend piston life • Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
  • Novatek 5 inch Electric Shrouded Grinder

    Novatek 5 inch Electric Shrouded Grinder

    $908.00

    Questions? Call us at (866) 812-6252

    Novatek’s  5" &  7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5”  &  7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
  • Novatek 35 Needle Scaler Kit

    Novatek 35 Needle Scaler Kit

    $923.00

    Questions? Call us at (866) 812-6252

    The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our most powerful offset scaler • Powerful and light-weight • All steel components offer durability and long-life • 1800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 35CS100 -1/2" Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available
  • Novatek 7 inch Electric Shrouded Grinder

    Novatek 7 inch Electric Shrouded Grinder

    $935.00

    Questions? Call us at (866) 812-6252

    Novatek’s  5" &  7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5”  &  7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
  • Novatek Novair 1000 for sale

    Novatek Novair 1000 with Standard Filter

    $950.00 – $1,350.00

    Questions? Call us at (866) 812-6252

    The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern.  Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
    Features • True 1000 cubic feet per minute air movement with all filters in place. • Powerful 1.00 Hp motor • 110v 60Hz or 220v 50/60Hz • Vertical configuration • Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed motor • “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.
    Benefits • Smooth, consistent air flow • Power motor pulls particulate deeper into the media extending filter life • Small footprint-Perfect for tighter areas • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Lightweight and virtually indestructible • Easy to clean and decontaminate
  • Novatek 5 inch Air Shrouded Grinder

    Novatek 5 inch Air Shrouded Grinder

    $967.00

    Questions? Call us at (866) 812-6252

    Novatek’s  5" &  7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5”  &  7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
  • Novatek 7 inch Air Shrouded Grinder

    Novatek 7 inch Air Shrouded Grinder

    $993.00

    Questions? Call us at (866) 812-6252

    Novatek’s  5" &  7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations. Features • 5”  &  7” models available • Choice of compressed air or electric power sources • Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors • Floating dust shrouds maintain vacuum seal • Replaceable wear skirts • Side handle included • Utilizes a wide assortment of abrasives Benefits • Multiple grinder sizes and discs for varied work • Powerful drive units handle heavy loads and maintain production • Floating shrouds conform to work surface for dustless operation • Disposable wear skirts saves aluminum shroud from wear • Comfort handles allow for operator comfort • Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
  • Novatek Novair 1000 for sale

    Novatek Novair 1000 with Alarm and Lights

    $1,042.00 – $1,395.00

    Questions? Call us at (866) 812-6252

    The Novair 1000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern.  Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations.
    Features • True 1000 cubic feet per minute air movement with all filters in place. • Powerful 1.00 Hp motor • 110v 60Hz or 220v 50/60Hz • Vertical configuration • Utilizes standard 16x16x11.5 HEPA filters or nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed motor • “Hand truck” configuration featuring no marring skids and wheels allows for easy transport by one operator Compact upright design is perfect for tight spaces.
    Benefits • Smooth, consistent air flow • Power motor pulls particulate deeper into the media extending filter life • Small footprint-Perfect for tighter areas • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Lightweight and virtually indestructible • Easy to clean and decontaminate
  • Novatek Contained Blast Systems Workhead with Roller Kit

    Novatek Contained Blast Systems Workhead with Roller Kit

    $1,093.00

    Questions? Call us at (866) 812-6252

    Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.  Features & Benefits • All steel body for maximum durability • Can be fitted to existing blasting equipment • Works off standard 3/4" blast hose • Utilizes standard blast nozzles • 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator • Replaceable front steel wear sleeves for increased workhead life • Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces • 3" blast pattern • Can be fitted to most existing blast equipment CBS0021 - Workhead w/Roller Kit • Workhead complete with all its accessories • Workhead Roller Attachment • 1 x #4 Blasting Nozzle • 2 x Internal Corner Brushes • 2 x External Corner Brushes • 2 x 2" Steel Wear Sleeves • 2 x 4" Steel Wear Sleeves
  • American Sanders RS-16 & RS-16DC Rotary Sanders

    American Sanders RS-16 & RS-16DC Rotary Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The RS-16 and RS-16DC Rotary Sanders offer strength, durability, and ease of use for those aggressive sanding jobs. Available in standard or dust control (DC) models, these rotary sanders come with a powerful 1.5 hp motor that provides smooth operation and aggressive sanding at an economical price. Features:
    • Powerful 1.5 hp motor provides smooth operation and aggressive sanding.
    • Gray non-marking wheels and power cord protect the floor.
    • Innovative “wiper” style switch keeps the motor contacts clean.
    • Chrome plated steel housing, motor cover, and handle tube provide maximum durability.
    • Dust port easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment. (DC model only)
    • Transparent molded plug has an internal light that serves as a power indicator.
    • Grip face pad driver supplied with the machine (not shown).
  • Novatek 28PG Vibration Reduced Needle Scaler Kit

    Novatek 28PG Vibration Reduced Needle Scaler Kit

    $1,115.00

    Questions? Call us at (866) 812-6252

    Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features • Flexible, interchangeable nose pieces for flat surfaces, corners, and angles. • 2200-3000 blows per minute gives maximum performance • 3mm chisel tip needles standard • Fully adjustable front vacumm take-off • Standard 1.5” vacuum take-off • Steel components offer durability and long-life • 2mm Flat & 3mm Flat or chisel Tip Needles available • Vibration dampening technology (VRS Models) • Tool-less needle change out (VRSModels) Benefits • Specialy designed for abatement and remediation work • Light-weight for extended run times • Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas • Works on irregular surfaces • Comfortable rubber pistol grip for operator comfort • Low air consumption allows for use on small, portable compressors
  • Novatek Novair 2000 for sale

    Novatek Novair 2000 with Standard Filter

    $1,122.00 – $1,890.00

    Questions? Call us at (866) 812-6252

    The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern.  Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
  • Novatek Novair 2000 for sale

    Novatek Novair 2000 with HEPA Filter

    $1,122.00 – $1,890.00

    Questions? Call us at (866) 812-6252

    The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern.  Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
  • Novatek Novair 2000 for sale

    Novatek Novair 2000 with Alarm and Light

    $1,210.00 – $1,972.00

    Questions? Call us at (866) 812-6252

    The Novair 2000 Portable Air Filtration for use in abatement, hospitals, air scrubbing, or anywhere dust is a concern.  Available in a variety of power sources (110v-220v 50/60Hz) and filter configurations. Powerful-High Volume • True 2000 cubic feet per minute with filters in place • Powerful 2 HP motor, (the most powerful in it’s class) • Horizontal Configuration • Uses Standard 24x24x11.5 HEPA filters • Utilizes HEPA filters or Nuisance dust filters • Polyethylene shell is seamless and dent proof • 2 speed configuration • Integrated molded carrying handles • Caster nest for stacking • Integrated rib for strapping Benefits • Move the same air with fewer machines • Longer filter life. Motor pulls more particulate deeper in the filter • Light and compact. Fits through standard doorways • Replacement filters readily available • Filters for hazardous material or nuisance dust • Dent proof, leak proof polyethylene. Light weight and virtually indestructible • Easy to decontaminate or clean
  • SPE RMS Magnetic Floor Sweeper for sale

    SPE RMS Magnetic Floor Sweeper

    Request a Quote

    Questions? Call us at (866) 812-6252

    The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place.
    • Collects ferrous and metallic debris from floor after blasting
    • Simple operation
    • 50 year magnet life
    The simply operated release mechanism enables easy depositing of debris after collection. The permanent magnet will retain its power for 50 years and requires no maintenance. The height is adjustable to cope with large waste and uneven surfaces. The standard sweepers range in size from 310mm to 915mm wide but alternative towable and forklift mounted models are available.
  • husqvarna a 2000

    Husqvarna A2000 Air Scrubber

    $1,255.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. A 2000 is one of the most advanced portable air cleaners available on the market. It is tested and certified for use as both an air cleaner and a negative air machine. Thanks to a reliable filter system and a design that is perfectly matched to operation with HEPA class H13 filters, that are tested and certified at an efficiency rate of 99.99% at 0.3 microns, the air cleaner puts out superior air quality – be it when dealing with concrete dust, fine sanding dust or gypsum dust. It has two warning lights to indicate when the filters are clogged or leaking. Operates at two very quiet speeds. Thanks to the compact design, the unit is easy to move and transport. Non-marking, lockable wheels allows for easy transport.
  • National 3435 5 inch Hand Held Grinder for sale

    National 3435 5″ Hand Held Grinder

    $1,392.94

    Questions? Call us at (866) 812-6252

    Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal SAFETY
    • Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
    • Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud
    COMFORT
    • Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue
    PERFORMANCE
    • Accommodates multiple styles of diamond turbo cup wheels
  • National 3535 Corner Preparation & Polishing Tool for sale

    National 3535 Corner Preparation & Polishing Tool

    $1,392.94

    Questions? Call us at (866) 812-6252

    This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames. SAFETY
    • Loop handle enables precision handling
    PERFORMANCE
    • Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
    • Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion
  • Novatek Hydra 2 inch Kit

    Novatek Hydra 2 inch Kit

    $1,450.00

    Questions? Call us at (866) 812-6252

    The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
  • Novatek Hydra - Complete Kit 2 and 2.5 inch

    Novatek Hydra – Complete Kit 2 and 2.5 inch

    $1,475.00

    Questions? Call us at (866) 812-6252

    The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device. Features & Benefits • Focused water stream reaches heights of 100ft. or more (30 meters or more) • Corrosion resistant, solid stainless steel body • Heavy-duty tripod provides a rugged and stable platform • No moving parts to wear • Swiveling head allows for simple operation • Integrated “ball valve” for regulating jet stream and pressure • Easy quick cam connections for easy and rapid connection of hoses • Recognized anti-piracy device
  • Novatek 2 inch Air RotoPeen with Star Cutter

    Novatek 2 inch Air RotoPeen with Star Cutter

    $1,587.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards  when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Novatek 2 inch Electric RotoPeen with Star Cutters

    Novatek 2 inch Electric RotoPeen with Star Cutters

    $1,595.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Bersi T0 Pre Separator for sale

    Bersi T0 Pre Separator

    $1,600.00

    Questions? Call us at (866) 812-6252

    When large amount of dust produced during the grinding, it is advisable to use a pre-separator. The special cyclone system captures 98% of the material before vacuuming, greatly improve the filter efficiency and protect your dust extractor from clogging easily. T0 can be used in conjunction with all common industrial vacuums and dust extractors.
  • Novatek 2 inch Air RotoPeen with Flaps

    Novatek 2 inch Air RotoPeen with Flaps

    $1,638.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards  when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Novatek 2 inch Electric RotoPeen with Flaps

    Novatek 2 inch Electric RotoPeen with Flaps

    $1,725.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal

  • Husqvarna DE 110 H Dust Extractor

    $1,784.50

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. It is equipped with a user friendly HMI that monitors performance and an e-flow function that automatically adjusts the air flow, enabling stable air flow and extending intervals between filter-cleanings. Its high water protection allows fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, run-time, service and filter status along with other valuable usage data.
  • Novatek 4 inch Air RotoPeen with Star Cutter

    Novatek 4 inch Air RotoPeen with Star Cutter

    $1,803.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards  when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Novatek 4 inch Air RotoPeen with Flaps

    Novatek 4 inch Air RotoPeen with Flaps

    $1,849.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards  when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Novatek 4 inch Electric RotoPeen with Flaps

    Novatek 4 inch Electric RotoPeen with Flaps

    $1,849.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal

  • Husqvarna DE 110i H Dust Extractor

    $1,851.58

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is powered by Husqvarna’s own 36 V BLi batteries and is an excellent match for handheld battery equipment. It features a user-friendly HMI and an e-flow function that automatically adjusts the air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.

  • Husqvarna DE 110 SH Dust Extractor

    $1,881.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. Its three-stage filtration process inlcuding large filter surfaces enables long run-time between filter cleanings. Its high water protection allows fast and efficient decontamination.
  • Husqvarna FS 309 Flat Saw

    Husqvarna FS 309 Flat Saw

    $2,107.38

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The FS 300-series includes lightweight and compact floor saws. These saws are ideal for small repair jobs and are very easy to handle. They can be transported in any small vehicle. Shown with OPTIONAL water tank.
  • Novatek 2 inch Air RotoPeen Kit

    Novatek 2 inch Air RotoPeen Kit

    $2,117.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards  when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Novatek 2 inch Electric RotoPeen Kit

    Novatek 2 inch Electric RotoPeen Kit

    $2,117.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Powerful 1200 watt electric motor (110v & 220v Models) • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models) • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards easily when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • National power hammer trolley for sale 3

    National Power Hammer Trolley

    $2,236.94

    Questions? Call us at (866) 812-6252

    Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition. TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
  • Gorilla GCT-9 Silverback Dustless Electric Crack Chaser

    Gorilla GCT-9 Silverback Dustless Electric Crack Chaser

    $2,286.02

    Questions? Call us at (866) 812-6252

    Features

    • Locking/swiveling rear casters

    • Excellent dust control

    • Fast depth adjustment

    • Easy blade lift lower

    • Multifunctional

  • Bersi TS2100 H13 HEPA Dust Extractor

    Bersi TS2100 H13 HEPA Dust Extractor

    $2,350.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.110V/2.4KW TS2100 is a two engine HEPA dust extractor. It is equipped with a main filter as the first and two H13 filter as the final.Each HEPA filter is individually tested and certified to have a minimum efficiency of 99.97% @ 0.3 microns. which meets the new silica requirements.This professional dust extractor is excellent for building, grinding, plaster and concrete dust.
  • Edco 14″ Compact Saw – Downcut for sale

    Edco 14″ Compact Saw – Downcut

    $2,364.86

    Questions? Call us at (866) 812-6252

    MODEL: KL-14
    • 14” Blade Capacity
    • Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
    • Heavy-Duty Box Frame Construction
    • Laser Fabricated Thick Steel Material
    • Easy-Use Hand Wheel Depth Control
    • Misting system for wet cutting
    • Thick steel blade guard for added safety
    • Easy access belts and bearings for fast maintenance
    • Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint
  • Husqvarna FS 400 LV

    Husqvarna FS 400 Flat Saw

    $2,576.52

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Our robust FS 400 LV is a convenient all-round petrol push floor saw. The adjustable handle ensures an ergonomic working position. Perfect weight distribution gives excellent stability while sawing. Ideal for small road repair jobs in concrete or asphalt, up to 189 mm cutting depth.
  • American Sanders Super 7R Edger

    American Sanders Super 7R Edger

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Super 7R is the most efficient wood floor edger in the industry. Designed for both power and durability, it has been the edger of choice for the pro contractor for over 50 years. Equipped with a quick release dust bag and the ability to attach directly to a vacuum, this edger continues to outpace the competition. Features:
    • Hardened steel pinion with brass drive gear reduces vibration.
    • Precision-balanced sanding pad produces finer finish.
    • Powerful 1 hp motor maintains speed under the heaviest cutting conditions.
    • Rotating dust pipe swivels 210 degrees to allow access to tight spaces and easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment.
    • Quick release dust bag that slides on and off with a simple twist and pull.
    • Transparent molded plug has an internal light that serves as a power indicator.
  • Novatek 4 inch Air RotoPeen Kit

    Novatek 4 inch Air RotoPeen Kit

    $2,648.00

    Questions? Call us at (866) 812-6252

    Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust. Features • Available in 2” or 4” models • Lightweight but powerful 1.2 hp drive motor • Offered with 3M Roto-Peen flaps or carbon steel cutters • Rollers allow for use on curved surfaces • Compact design for tighter access • Works up to 1.5” from walls • Quick change hubs and abrasives • Designed for horizontal applications • Integrated vacuum shroud • Dust-free when used with compatible vacuum system • Converts from Roto-Peen flaps to cutter hubs in minutes • Available in kit form Benefits • 2” model is lighter and ideal vertically and overhead use • 4” model is best for horizontal surfaces • High production rates on flat surfaces • Works on curved surfaces and piping • Standard 1.5” vacuum port allows for dustless operation • Accepts other abrasives for coatings or materials removal off concrete or steel • Meets OSHA & EPA standards  when matched with our HEPA vacuums • Imitates shot blast finish when equipped w/RotoPeen Flaps • High production on decks and flooring • Perfect for heavy coating removal
  • Blastrac BDC-22 Dust Collector for sale

    Blastrac BDC-22 Dust Collector

    $2,700.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Blastrac BDC-22 dust collector is equipped with a Longopac bagging system, which is easy to mount and handle. Thanks to this system, the operators have no more contact with the dust in their direct vicinity. The Blastrac BDC-22 dust collection system is equipped with a M-class star filter and it is very versatile. The BDC-22 is ideally suited for use with medium shot blasting, grinding, polishing and scarifying machines. For a safe, dust free and perfectly clean jobsite Blastrac has designed a full range of consumables and optional items to get the best possible results out of your dust collector. Easy to maneuverer and transport due to the robust wheels with brake systems. User friendly design, just connect the hose to the dust collector and you are ready to go. Limited downtime is essential for any successful job. Due to the special designs our medium dust collection systems allows you to change the dust bag quickly for limited downtime.
  • American Sanders AVAC 18 Dust Containment System

    American Sanders AVAC 18 Dust Containment System

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The AVAC 18 dust containment system delivers high-end filtration performance and capacity in a more compact unit that is perfect for single machine operations. Features:
    • Top level power in a compact unit
    • Easier to transport and store than a larger machine
    • Superior filtration for dust-free applications
    • High capacity allows for long single machine run times
  • American Sanders CE7 Pro+ Edger

    American Sanders CE7 Pro+ Edger

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The CE7 Pro+ edger is ideal for sanding under cabinets and along wall lines, closets, and stair landings. This machine is equipped with a powerful two speed motor that delivers superior performance in the most difficult sanding applications. With adjustable handles, vac ready dust control features, and powerful LED lights, this edger is perfect for the professional contractor. Features:
    • Hook and loop or bolt-on sandpaper-ready.
    • Dual non-marking casters.
    • Safety start switch.
    • Two-speed motor for different surfaces and conditions.
    • Powerful LED lighting.
    • Innovative dust bag features internal support.
    • Dust control vacuum-ready.
    • Handle height adjustment for operator comfort.
    • Effectively sands under 3.5” toe-kicks.
  • American Sanders EZ-E Entension Edger

    American Sanders EZ-E Entension Edger

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-E Extension Edger is the perfect tool for tackling the most difficult edging challenges, including toe-kicks and radiators.  Available in 8″ and 13″ interchangeable configurations, the EZ-E gives you the reach needed to deliver beautiful results.  The EZ-E can be run with the included quick release dust bag or can attach directly to a vacuum and comes with a soft case for storage and transport. Features:
    • Extension arm allows for reaching under toe-kicks or radiators
    • Precision-balanced sanding pad produces finer finish.
    • Powerful 1 hp motor maintains speed under the heaviest cutting conditions.
    • Rotating dust pipe swivels 210 degrees to allow access to tight spaces and easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment.
    • Quick release dust bag slides on and off with a simple twist and pull.
    • Tool-free adjustment of rear casters speeds adjustments.
  • American Sanders Sander 1600DC Rotary Sander

    American Sanders Sander 1600DC Rotary Sander

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Sander 1600 Rotary Sander was designed and innovated specifically for the demands of wood floor sanding and finishing. The added weight and balanced design deliver the most aggressive sanding, highest productivity and smoothest operation of any rotary sander on the market. The Sander 1600 can be used with the American Sanders HydraSand Multi Head Sanding Disc. The HydraSand attachment mounts to any rotary sander and utilizes six 5” pads mounted to a thick steel plate. The steel construction produces a product that is 15% more effective than leading competitive units. Features:
    • Powerful, fully enclosed, 1.5 hp motor.
    • Low profile design allows access under cabinets and toe-kicks.
    • Ergonomic handle.
    • Super grip pad driver (not shown).
    • Bright, fluorescent light, for increased visibility.
    • Durable bristle skirt helps contain dust.
    • Dust control ready.
    • Gray, non-marking transport wheels.
  •

    American Sanders American B-2+ Edger

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The professional’s choice for 50 years, the B-2+ Edger offers a 3200 RPM setting for fast aggressive cutting and a 2800 RPM setting for greater precision. With a new dust pipe design that allows this machine to be attached directly to a vacuum, as well as a new and innovative quick release bag design, this edger will remain the professional’s preferred machine. Features:
    • Powerful 1 HP motor maintains speed under heaviest cutting conditions.
    • Electronically balanced fan and motor for smoother operation.
    • Long lasting graphite brushes for extended brush and armature life.
    • Precision balanced sanding pad produces finer finish.
    • Rotating dust pipe swivels 280 degrees for access to closets and tight spaces.
    • Innovative quick release dust bag saves time and removes the hassle of strings.
  • SPE BEF200N-4A Gas Scarifier for sale

    SPE BEF200N-4A Gas Scarifier

    Request a Quote

    Questions? Call us at (866) 812-6252

    The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
    • Rigid, compact design
    • Quick Lift – Pulls Cutters In/Out of Cut
    • 50mm dust extraction port Dust free when operated with a suitable vacuum
    • Large diameter wheels for excellent mobility and stability
    • Welded construction is rigid, strong and lower control
    • Fine Adjust- Screw type raise and lower control
    • Firm engine mounting plate
    • Front wheels protected from debris
    • Height adjustment at the handle
  • National 550 Floor Scraper for sale

    National 550 Floor Scraper

    $2,818.39

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more. A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.
    • Angle-adjustment wheel changes pitch of the blade in seconds
    • 1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
    • Removable front weight provides additional down pressure and facilitates easy loading/unloading
    • Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • American Sanders Epoch Rotary Sanders

    American Sanders Epoch Rotary Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Epoch is a dual speed, multi-purpose machine designed to meet the many demands of wood floor sanding. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of adjustment. Features:
    • Heavy duty 60 amp DC rectified motor to provide more low end torque.
    • Dual speed capability for use with various grits, wood types, and job site conditions.
    • Adjustable 25lb weight kit allows for adjustments in sanding aggressiveness.
    • Bright, flexible LED light for improved visibility.
    • Ergonomic handle.
    • Dust control ready.
    • Durable canvas, low profile skirt contains dust and allows close access to wall lines.
  • Edco 18″ Compact Saw – Downcut for sale

    Edco 18″ Compact Saw – Downcut

    $2,974.90

    Questions? Call us at (866) 812-6252

    Model: KL-18 BLADE NOT INCLUDED
    • 18″ blade capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail (optional)
    • 13 HP gasoline engine
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • High quality molded rubber wheels
  • Novatek Nova-Strip Eco-Strip 100 115V

    Novatek Nova-Strip Eco-Strip 100 115V

    $2,995.00

    Questions? Call us at (866) 812-6252

    The EcoStrip 100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs. and utilizing a 15 amp, 110volt grounded outlet makes this an all around winner. The Ecostrip heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. Features • 196 square inch footprint removes 1 - 12”x12” in one cycle • Operates on 110V -15amp current • Safety sensor shuts down machine if left unattended • Compact design allows easy access to tight including steps and closets • The perfect compliment to the N378 and N1026 models • Heavy duty and light-weight aluminum construction

  • Husqvarna DE 120 H Dust Extractor

    $3,003.12

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. This versatile HEPA dust extractor is compact and easy to transport, yet powerful. It is designed for use with larger hand-held power-tools, floor and hand grinders, shotblasters, scarifiers and more. Its performance and sturdiness make the DE 120 ideal for demanding, heavy-duty applications. It features a user-friendly HMI and an e-flow function that automatically adjusts air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.
  • Edco 20 inch Walk Behind Saw Downcut for sale

    Edco 20″ Walk Behind Saw – Downcut

    $3,108.60 – $4,447.80

    Questions? Call us at (866) 812-6252

    Model: DS-20 BLADE NOT INCLUDED
    • 20″ Blade Capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Heavy-Duty Anti-Vibration engine mount!
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail for easy loading and unloading
    • 13 HP gasoline engine or 7.5 HP electric options
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • Solid-Steel lifting handles
    • High quality molded rubber wheels
  • American Sanders AVAC 26 Dust Containment System

    American Sanders AVAC 26 Dust Containment System

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Designed specifically for professional wood floor sanding contractors, the AVAC 26 dust containment system is the perfect mix of power and performance. Its compact design makes it highly portable, and yet it still boasts a large 26 gallon capacity tank with superior filtration capabilities. Its high suction, high filtration, and ease of transport make it the vacuum of choice in the wood floor sanding market. Features:
    • Dual 2” vacuum ports collect dust from multiple sanding machines.
    • Clear polycarbonate lid makes it easy to monitor the tank capacity.
    • 50 foot detachable power cord.
    • 26 gallon canister.
    • Convenient handle for lifting.
    • Non-marking, heavy duty casters.
    • Three 800 watt, dual stage motors which run independently of each other.
    • Uses reusable and disposable filters to capture sanding dust.
    • High performance filtration. (H.E.P.A. filter is also available as an option)
  • National DL2000 Dust Collector for sale

    National DL2000 Dust Collector

    $3,589.97

    Questions? Call us at (866) 812-6252

    The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
    • DL2000 Dust Collector, 115 V
    SAFETY
    • Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    • Heavy-duty, anti-static collection hose provides durability and safety
    PERFORMANCE
    • Primary filter
    • State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
  • Edco Magna-Trap Turbo Lite Grinder for sale

    Edco Magna-Trap Turbo Lite Grinder

    $3,661.99

    Questions? Call us at (866) 812-6252

    The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.
    • Resurfaces hundreds of sq ft per hour
    • Compatible with EDCO Vortex 200 Vacuum for dust-free working
    • At only 90lbs it fits inside car trunks when the handlebar is collapsed
    • Accepts EDCO Magna-Trap® Slide-On Tooling
  • American Sanders EZ-Sand Orbital Sanders

    American Sanders EZ-Sand Orbital Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-Sand orbital floor sander features a powerful three-motor, triple-head design that allows it to effectively sand large, open areas. At the same time, the compact design makes it easy to sand edges, wall lines and closets. Its modular design allows the handle to quickly separate from the base of the machine, making it incredibly easy to transport to and from any home or job-site. The EZ-Sand is equipped with a self-contained dust collection system or it may be attached to an external dust containment system. Features:
    • Safety interlock prevents accidental starts.
    • U-Joint style handle base for easy maneuverability.
    • Rugged 1.5 inch steel handle tube is chrome plated to prevent corrosion.
    • Rear mounted dust bag for excellent visibility.
    • Lifting handle for easy transport.
    • Die-cast aluminum handle with molded on rubber grips for durability and comfort.
  • American Sanders OBS-18 & OBS-18DC Orbital Sanders

    American Sanders OBS-18 & OBS-18DC Orbital Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The random-orbital sanding action of the OBS-18 and OBS-18DC removes the scratch patterns left by drum or rotary sanders, leaving a smooth, flat floor ready for refinishing. At 3,600 orbits per minute, the OBS-18 sands faster than any other orbital sander available. With torque-less operation for enhanced operator comfort, the OBS-18 and OBS-18DC are perfect for interim “screen and recoat” and fine finish sanding jobs. Features:
    • The totally enclosed, fan cooled motor, eliminates overheating and the need for motor cleaning.
    • Heavy duty cast aluminum main frame and pad driver plate for added strength.
    • Independent dust pickup fan for effective dust containment (DC model only).
    • Dust pipe allows for easy attachment of 1-1/2 or 2 inch vacuum hoses for improved dust containment.
    • Bristle dust skirt to aid in dust containment (not shown).
    • Transparent molded plug has an internal light that serves as a power indicator (not shown).
  • SG-8 Dustless Electric Surface Grinder

    Gorilla SG-8 Dustless Electric Floor Grinder

    $3,818.88

    Questions? Call us at (866) 812-6252

    The SG-8 is our compact and robust surface grinder with a fixed grinding head allowing for a fast and easy transition to edge grinding. To help facilitate consistent passes and even tool wear, the SG-8 comes equipped with our floating tool driver. The tool driver along with the preset wheel position settings result in extremely smooth operation. Lastly, the 2-position handle provides an ergonomic position and an easy way to transport and store the unit. All of these features are complemented by our powder-coated ¼” steel frame to provide durability, longevity, and reduce harsh vibrations. Proudly made in the USA.

    Features

    Excellent dust control                                                                 Self-leveling head

    Fixed head for edge grinding                                                     3-segment floating head taper lock system

    3-point hold down                                                                       Built-in transport handles

    Built-in tool storage                                                                    Wrench holder

    2″ dust port

     
  • Edco Magna-Trap 7 Turbo Edge Grinder for sale

    Edco Magna-Trap 7″ Turbo Edge Grinder

    $3,895.00

    Questions? Call us at (866) 812-6252

    • Three-position articulating frame adjustment for left angle, right angle or straight position grinding
    • Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
    • Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
    • Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
    • Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
    • Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
    • New & improved tapered roller bearings provide less maintenance and longer life
  • SPE BEF200N-2A Electric Scarifier for sale

    SPE BEF200N-2A Electric Scarifier

    Request a Quote

    Questions? Call us at (866) 812-6252

    The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
    • Rigid, compact design
    • Quick Lift – Pulls Cutters In/Out of Cut
    • 50mm dust extraction port Dust free when operated with a suitable vacuum
    • Large diameter wheels for excellent mobility and stability
    • Welded construction is rigid, strong and lower control
    • Fine Adjust- Screw type raise and lower control
    • Firm engine mounting plate
    • Front wheels protected from debris
    • Height adjustment at the handle
  • Edco 14″ Compact Saw – Upcut for sale

    Edco 14″ Compact Saw – Upcut

    $3,925.14 – $5,312.43

    Questions? Call us at (866) 812-6252

    MODEL: SB-14, ASB-14
    • Gasoline, electric and air-power options
    • Up-cut blade rotation provides level surface at the base of the cut
    • Vacuum port
    • Heavy-duty, 7-gauge steel frame & undercarriage eliminates bending and vibration
    • Optional air motor comes fully equipped with lubricator, moisture seperator and a convenient, handle-mounted on/off valve (Requires 160 CFM at 90 PSI)
  • Bersi TS3000 H13 HEPA Dust Extractor for sale

    Bersi TS3000 H13 HEPA Dust Extractor

    $4,200.00

    Questions? Call us at (866) 812-6252

    230V/3.6KW TS3000 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.
  • Bersi TS3000 H13 HEPA Dust Extractor for sale

    Bersi TS3100 H13 HEPA Dust Extractor

    $4,200.00

    Questions? Call us at (866) 812-6252

    110V/2.4KW TS3100 is a HEPA concrete dust extractor, with 3 large Ametek motors. TS3000 has plenty power to be connected to any mid or larger size grinders, scarifiers, shot blasters to extract freshly cut, friable concrete dust. Certified HEPA filtration to 99.99% @ 0.3 microns to guarantee that the vacuum exhaust is absolutely dust-free. TS3000 is supplied with a complete tool kit, including D50*10 meters hose, wand and floor tools.
  • Edco 8 Walk-Behind Scari-Lite Crete-Planer for sale

    Edco 8″ Walk-Behind Scari-Lite Crete-Planer

    $4,519.80

    Questions? Call us at (866) 812-6252

    MODELS: CPL-8E, CPL-8G
    • 8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
    • 8-Inch, 6-Shaft drum accepts carbide and steel cutters
    • Etch the surface for new coatings
    • Available in 1.5HP Electric or 5.5HP Gasoline
    • Comes standard with universal vacuum port hookup
    • Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane
  • American Sanders Epoch HD Rotary Sanders

    American Sanders Epoch HD Rotary Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD is a 230V dual speed, multi-purpose machine with the muscle to handle the toughest floor jobs. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:
    • 230V, 2.5HP motor for loads of low-end torque without overloading household circuits.
    • Dual speed capability for use with various grits, wood types, and job site conditions.
    • Removable weight bracket to provide better access to tight spaces.
    • Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.
    • Bright, flexible LED light (with replaceable bulb) for improved visibility.
    • Heavy duty 6” wheels for added stability.
    • Exclusive tilt-back wheel system protects pad drivers from damage.
    • Dust control ready.
    • Durable rigid, low profile skirt contains dust and allows close access to wall lines
  •

    BW SB-6 Shot Blaster

    Questions? Call us at (866) 812-6252

    The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.
  • Gorilla GCT-X Dustless Joint Saw

    Gorilla GCT-X Dustless Joint Saw

    $4,661.40

    Questions? Call us at (866) 812-6252

    Features

    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • Edco Magna Trap Single Disc Floor Grinder for sale

    Edco Magna Trap Single Disc Floor Grinder

    $4,664.24

    Questions? Call us at (866) 812-6252

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders
  • Husqvarna S 36 Dust Extractor

    Husqvarna S 36 Dust Extractor

    $4,769.56 – $5,039.60

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes.
  • Novatek Nova-Strip 378

    Novatek Nova-Strip 378

    $4,975.00

    Questions? Call us at (866) 812-6252

    The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel. To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles. Features • 378 square inch footprint removes 2-12”x12” in one cycle • Operates off of 110v - 20amp current • Identical controller to the N1026 • Compact design allows easy access to tight spaces. • Heavy duty and light-weight aluminum construction
  • Cimex Surface Scarifier

    Cimex R48HD Surface Scarifier

    $5,125.00

    Questions? Call us at (866) 812-6252

    Commercial Grinding Greatness. Comes with (1) 30lb weight The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects. The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios. These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring.
  • American Sanders Epoch HD-20 Rotary Sanders

    American Sanders Epoch HD-20 Rotary Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The NEW Epoch HD-20 is a 20” version of the famed 230V dual speed Epoch HD. This multi-purpose machine delivers power and productivity. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand 20, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness. Features:
    • 230V, 2.5HP motor for loads of low-end torque without overloading household circuits.
    • Dual speed capability for use with various grits, wood types, and job site conditions.
    • Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.
    • Removable weight bracket to provide better access to tight spaces.
    • Bright, flexible LED light (with replaceable bulb) for improved visibility.
    • Exclusive tilt-back wheel system protects pad drivers from damage.
    • Dust control ready.
    • Durable rigid, low profile skirt contains dust and allows close access to wall lines
    • With HydraSand 20 compared to traditional 20” planetary head:
        • 32% less amp draw
        • 14% more aggressive cut.
  • Husqvarna FS 600 E Flat Saw

    Husqvarna FS 600 E Flat Saw

    $5,185.95

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. FS 600 E is a versatile CE-Eurotest certified electric small push floor saw for left and right hand sawing suitable for indoor sawing. Optimised weight and balance to ensure ergonomic working position and zero CO₂ emissions during use. The built in water tank enables to cut without external water supply. Suitable for small sized service and repair jobs for a majority of floor sawing applications.
  • Gorilla GCT-XEE Dustless Joint Saw 1

    Gorilla GCT-XEE Dustless Joint Saw

    $5,207.10

    Questions? Call us at (866) 812-6252

    Features

    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • American Sanders 3DS Orbital Sanders

    American Sanders 3DS Orbital Sanders

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. When you need the ultimate fine finish, the 3DS Orbital Sander outperforms the competition with three rotating discs that provide cross-grain sanding and efficient dust control. The 3DS is perfect for providing a smooth, flat floor on parquet, herringbone and ornamental pattern wood floors. Features:
    • (3) 8″ high speed rotating discs eliminate the need for “with grain” sanding.
    • 3 HP fully-enclosed motor requires less maintenance.
    • Large non-marking tires provide ease of transport.
    • Vacuum operates independent of sander–performs double duty.
    • Large dust containment chamber provides longer operation times.
  • cimex-diamond-finisher for sale

    Cimex CR48DF Diamond Finisher

    $5,325.00

    Questions? Call us at (866) 812-6252

    First-Class Floor Polishing.

    The Cimex Diamond Finisher allows for successive stages of floor preparation on concrete, marble, granite, terrazzo and stone floors to be completed more rapidly and with less effort than is possible by conventional methods. The three-headed, counter rotating system of our Cimex Diamond Finisher works in tandem with a selection of diamond faced finishing discs. These discs are graded from coarse to fine to accommodate newly laid floors, damaged stone and surface re-polishing. The generous 6.6 gallon solution tank allows for long stretches of uninterrupted usage during wet applications. Thanks to its superior design, the Cimex Diamond Finisher maintains constant pressure on all surfaces. This allows for clean, even cutting without the rotational scoring often found in other floor finishing systems. Also featured is the forward and reverse function. This allows the machine to operate in both directions, ensuring a smooth finish.
  • American Sanders EZ-8 Drum Sander

    American Sanders EZ-8 Drum Sander

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you “feather” the drum like the pros. Features:
    • Heavy duty 1-1/2 hp dual capacitor motor provides power for the most demanding jobs.
    • Disassembles easily for transport or storage.
    • Totally enclosed dust free motor eliminates motor cleaning.
    • 40 ft. gray rubber covered power cable provides longer reach.
    • Rugged cast aluminum construction designed for years of service.
  • Gorilla GCT-XEE Dustless Joint Saw

    Gorilla GCT-XE Dustless Joint Saw

    $5,928.24

    Questions? Call us at (866) 812-6252

    Features

    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • liteprep sg 20 spyrogrinder for sale

    Lite Prep SG-20 Spyrogrinder

    Request a Quote

    Questions? Call us at (866) 812-6252

    Comes with (2) 30lb weights
    With A working width of 20” and a wide range of grinding, sanding, polishing, and scraping attachments, the Spirogrinder series is highly versatile and delivers excellent results on a wide variety of floor surfaces including marble, terrazzo, stone and concrete. All Spirogrinder machines may be used for wet or dry applications, and the VS models offer complete control over operating speed. Three specially designed rotating heads mounted on a counter-rotating planetary driver grind coatings and paint off of hard floor surfaces to leave a smooth, open, professional finish. Brush skirt and optional vac system enables dust-free operation on all models, and optional, add-on stackable 20, 30 or 35 lb. weights are also available. Spirogrinder machines are well-engineered, sturdy, economical, efficient, and so easy to use that even unskilled personnel can produce expert results.
  • National DL3000 Dust Collector FOR SALE

    National DL3000 Dust Collector

    $6,045.06

    Questions? Call us at (866) 812-6252

    The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
    • DL3000 Dust Collector, 230 V
    SAFETY
    • Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    PERFORMANCE
    • Primary filter
    • Heavy-duty, anti-static collection hose provides durability and safety
  • BW SC-12 Scarifier Head Attachment for sale.

    BW SC-12 Scarifier Head Attachment (for SCB-1200)

    Questions? Call us at (866) 812-6252

    BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one-handed operation controls for raising and lowering heads, and easy to turn manual steering were designed with the contractor in mind. The SC-12 Scarifying Head attachment is a state of the art design that is self-leveling, automatically adjusting itself to different contours of the floor or pavement. You will achieve an accurate removal of thin mill coatings to 1/4” overlays. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages you can go from steel to carbide cutters as well as different cage widths in minutes. The SCB-1200 with SC-12 Scarifier Head Attachment will put you ahead of the competition with its faster production rates, and a vacuum collector system that eliminates dust and removes all material from the scarified surface.
    • Rubber Membrane Removal
    • Concrete Milling
    • Line Striping
    • Bridge and Parking Decks
  • Edco Magna-Trap 10 Turbo Grinder for sale

    Edco Magna-Trap 10″ Turbo Grinder

    $6,378.30 – $9,877.50

    Questions? Call us at (866) 812-6252

    The TG-10 is four times faster than conventional grinders.
    • 10″ Working width will grind approximately 400-500 sq. ft. per hour at 1/16″ with an Magna-Trap® Dyma-Dots
    • Grind wet or dry
    • Includes 10″ Magna-Trap Multi-Tooling Disc & standard vacuum port
    • Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
    • Less torque on operator
    • Tapered roller bearings have improved seals for longer life and less maintenance
    • Adjust your grinder disc or multi-accessory plate with the rear wheel mounted level kit
    • Easy access turn style knob
    • Install different height diamond accessories and level them to ensure maximum productivity
  • Edco 8″ Walk-Behind Crete-Planer for sale

    Edco 8″ Walk-Behind Crete-Planer

    $6,485.31 – $10,793.48

    Questions? Call us at (866) 812-6252

    MODELS: CPM-8G, CPM-8E
    • 8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″
    • Removes traffic lines at 800-1,000 lineal ft. per hour
    • Power source over drum to eliminate vibration and maximize surface contact
    • Compact design
    • Front-mounted lifting handle makes loading and unloading easy
    • Vacuum port equipped
  • Edco Magna-Trap Dual-Disc Floor Grinder for sale

    Edco Magna-Trap Dual-Disc Floor Grinder

    $6,595.00 – $8,056.00

    Questions? Call us at (866) 812-6252

    MODELS: 2EC-NG, 2GC-NG

    The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight! Multi-Vac port for use with 2″ or 3″ vacuum hose 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts Gas & electric power options available Includes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control 6 grinding accessories required per loading
  • Husqvarna PG 450 Floor Grinder

    Husqvarna PG 450 Floor Grinder

    $6,662.64 – $6,881.94

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. PG 450 is a versatile and user-friendly planetary floor grinder. Perfect for a wide range of applications, e.g. coating removal, concrete grinding and concrete polishing. It is ideal for rental and both professional and semi-professional applications due to its many self-adjusting benefits.
  • National Helix Floor Grinder FOR SALE

    National Helix Floor Grinder

    $6,687.91

    Questions? Call us at (866) 812-6252

    Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency. SAFETY
    • Quick-release levers allow the machine to be separated into two pieces for easy transport
    • LED light illuminates the surface directly behind the machine
    COMFORT
    • Fully adjustable handle accommodates a range of operating positions
    PERFORMANCE
    • Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
    • Removable weights give the operator freedom to increase or decrease head pressure when grinding
    • 16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
    • Dual-speed motor increases the versatility of this machine; operating at high or low speed
  • Husqvarna PG 400 Floor Grinder

    Husqvarna PG 400 Floor Grinder

    $6,772.80

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. PG 400 is a versatile and very productive single disc floor grinder for a wide range of applications. With its 400 mm wide grinding width it efficiently grinds adhesives, paint, epoxy and spackle on medium to large concrete areas.
  • Edco 10 Walk-Behind Crete-Planer for sale

    Edco 10″ Walk-Behind Crete-Planer

    $6,984.00 – $8,053.20

    Questions? Call us at (866) 812-6252

    Models: CPM-10G, CPM-10E
    • 10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
    • 1/4” steel frame
    • Heavy-duty, oversized bearings
    • Weighs 299 lbs. with cutters
    • Tethered emergency stop switch
    • Larger 6” wheels in the rear for easy handling
    • Gasoline or Electric models available
    • Vacuum port standard for dust-free cutting
    • 6-Shaft and 8-Shaft easy change, side loading drums available
    • Tungsten carbide or steel cutters available
  • National 5280 Floor Scraper for sale

    National 5280 Floor Scraper

    $7,610.94

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces. Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
    • Variable speed, 12 to 50 feet per minute
    • Self-contained, limited-maintenance hydraulic fluid
    • Removable 49-pound saddle weight helps increase or decrease down pressure and traction
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • SPE BEF 275 Gas Scarifier for sale

    SPE BEF 275 Gas Scarifier

    Request a Quote

    Questions? Call us at (866) 812-6252

    Planing / Scarifying made easy...

    Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
    • 275mm (10.8″) working width
    • 400v 3-phase, gasolene/petrol versions
    • Rigid, compact design
    • 50mm dust extraction port
    • Dust free when operated with SPE 316 vacuum
    • Six flail shafts, heavy duty T.C.T. cutters
    • Forward mounted cutter drum for perfect balance
    • Side plate access for quick and easy cutter drum removal
    • Handle height fully adjustable for operational control
    • Monocoque construction is rigid, strong and accurate
    • Accurate depth control for precision surface texture and maximum cutter life

  • Husqvarna BG 250 230 V Floor Grinder

    $7,838.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. BG 250 is a single disc concrete grinder designed for heavy duty surface preparation applications. BG 250 is very easy and comfortable to use with low vibrations. Thanks to its two front handles, it is possible to lift the machine up a flight of stairs. BG 250 has an asymmetric dust exhaust with a built-in deflector for improved/optimised dust extraction. In addition, it is equipped with a special drive system for optimum load distribution.

  • Husqvarna BG 250P Floor Grinder

    $7,838.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The BG 250P is a petrol-powered grinder designed to give you all the functionality and versatility you need for a wide range of surfaces. With a single grinding head, this machine focuses all its pressure onto a single diamond disc for more effective and aggressive grinding. The BG 250P is ideal for applications requiring heavy duty surface preparation of small to medium sized floors such as surface levelling, the removal of coating defects and adhesives, preparation before coating and much more. Other applications include industrial flooring, concrete preparation and decontamination. This machine is easy to transport and its 3 in diameter dust hose connection manages dust more efficiently, for a safer work environment. Without the need for power cables, you can also enjoy greater mobility on job sites and make more of your time count.

  • Husqvarna BS 75 Floor Scraper

    $7,866.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.

    BS 75 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. This machine has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor stripper requires almost no maintenance. In addition, this floor scraper can be disassembled into 3 pieces for easy transportation up flights of stairs and into vehicles. It is also possible to add an additional 10 kg weight to mount on the weight block in order to make BS 75 more efficient on resilient floors. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.

  • Husqvarna HTC 270 220-240 V Floor Grinder

    $8,113.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. HTC 270 EG is a professional edge grinding machine allowing you to grind and polish edges quickly, efficiently and in an ergonomic manner. Instead of working in an uncomfortable position, grinding edges with handheld equipment, this machine makes it possible to tackle edges just as any other part of the floor, standing upright and progressing fast. Every step of the grinding and polishing process can be followed by mounting the same tools under the HTC 270 edge grinder as under the main floor grinder. The high head pressure and ingenious design (which allows for both left and right edge grinding) has earned praise from floor grinding specialists around the world. Additionally the low grinding head height of only 100 mm, enables grinding under shelves or other low-hanging obstacles. The floating cover follows the floor at all times and transportation is easy thanks to the detachable chassis.
  • American Sanders FloorCrafter Belt Sander

    American Sanders FloorCrafter Belt Sander

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The FloorCrafter upholds a long tradition of providing precision instruments to a craftsman’s trade. The FloorCrafter, engineered to be the most aggressive belt machine in the industry, was also designed to provide reduced vibration. Its cutting ability allows the hardwood sanding professional the ability to increase production while achieving perfect results. With the patented Dolly Transport system, the FloorCrafter is truly a unique and innovative approach to hardwood floor sanding. Features:
    • Precision balanced drum with machined spiral cooling slots.
    • Patented one-tool leveling adjustment.
    • Recessed drum door provides better air seal and eases abrasive installation and adjustments.
    • Patented Dolly Transport System eases transport to and from job sites.
    • Exclusive “feathering” drum lowering handle eases operation.
    • Exclusive split rear caster for smooth forward/reverse transitions.
  • SPE BEF 275 Electric Scarifier for sale

    SPE BEF 275 Electric Scarifier

    Request a Quote

    Questions? Call us at (866) 812-6252

    Planing / Scarifying made easy...

    Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
    • 275mm (10.8″) working width
    • 400v 3-phase, gasolene/petrol versions
    • Rigid, compact design
    • 50mm dust extraction port
    • Dust free when operated with SPE 316 vacuum
    • Six flail shafts, heavy duty T.C.T. cutters
    • Forward mounted cutter drum for perfect balance
    • Side plate access for quick and easy cutter drum removal
    • Handle height fully adjustable for operational control
    • Monocoque construction is rigid, strong and accurate
    • Accurate depth control for precision surface texture and maximum cutter life
  • Blastrac BDC-33 dust collector for sale

    Blastrac BDC-33 Dust Collector

    $8,595.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The  heavy-duty dust collection system is remarkably quiet and designed for multi-purpose use with medium to large grinding and polishing machines. The vertical profile is compact and offers great maneuverability with large wheels and two swiveling/locking casters. The ergonomic design also features easily accessible components for care and maintenance. The BDC-33 is an advanced unit that helps eliminate most all of the airborne dust and particulate generated with grinding and polishing equipment. The PPT is equipped with a wheeled dust-bin that dismounts smoothly for quick debris disposal and with a capacity of 143 lbs. make those efforts infrequent. The BDC-33 dust collector is equipped with the Longopac® bagging system and is perfect for a clean disposal.  This powerful industrial vacuum is also perfect for contractors who must utilize a system that satisfies environmental concerns.
      • Compact unit is easy to maneuver
      • Fully automatic self-cleaning system for prolonged filter life
      • HEPA filter included
      • Quick release-and-attach dust bin
      • Maintenance friendly design
      • Durable steel construction
      • Overload relief valve to save blower engine
  • Edco 3 Head Crete-Crusher for sale

    Edco 3 Head Crete-Crusher

    $8,757.06

    Questions? Call us at (866) 812-6252

    MODEL: CD-3
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 100 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Three, 5 Point Carbide Bits included
  • Novatek Infrared Nova-Strip 1026

    Novatek Infrared Nova-Strip 1026

    $9,345.00

    Questions? Call us at (866) 812-6252

    The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond.  This process allows you to lift  “Intact”  tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal. This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.
    Features & Benefits • 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle • Ceramic coated heat panel provides long life and durability • Computerized control systems guarantee precise and dependable operation • 100% solid state electronics. No mechanical relays or solenoids • Rapid heat up and cool down • Powder coated aluminum is durable and light-weight • Triple redundant safety features for operator safety • Integrated temperature indicator allows for monitoring of panel base • Operate on standard 220v, 50amp service eliminating external buck boosters” • 12v DC controls allow for safe, cool operation and long life • Case grounded for added safety
  • DG-25 Diamond Grinder/Polisher Attachment for sale

    DG-25 Diamond Grinder/Polisher Attachment (for SCB-1200)

    Questions? Call us at (866) 812-6252

    The DG-25 Diamond Grinder/Polisher is designed for coating removal to high gloss polishing on totally dry concrete. A rubber mounted grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200-K, while removing all material off the surface and reducing cleanup costs and effort. With twin, one piece 16” rubber mounted, belt driven grinding heads that are adjusted up and down using air pressure, giving you infinite adjustability.. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing.
  • Edco 20″ Self-Propelled Saw for sale

    Edco 20″ Self-Propelled Saw

    $10,035.45 – $12,971.58

    Questions? Call us at (866) 812-6252

    Model: SS-20
    • Stressproof, precision-machined, 1 3/4″ steel arbor shaft
    • Includes electric start, 12-volt battery and heavy-duty 15-amp charging system
    • Swing-away, rear 3-gallon fuel tank
    • Screw-type depth control w/lock guarantees accurate cutting
  • Pioneer Eclipse 420GPHD Concrete Polisher for sale

    Pioneer Eclipse 420GPHD Concrete Polisher

    Request a Quote

    Questions? Call us at (866) 812-6252

    The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors. Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class. The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
  • Edco Traffic Line Remover for sale

    Edco Traffic Line Remover

    $11,343.13

    Questions? Call us at (866) 812-6252

    MODEL: TLR-7

    Remove traffic lines from asphalt – and get the job done quickly!

    EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones. Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
    • 7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
  • National 6280 Commander Floor Scraper for sale

    National 6280 Commander Floor Scraper

    $11,753.73

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
    • Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Transport-wheel rack hanger on back of handle
    • Adjustable wheel scrapers prevent material buildup during operation
    • Patented isolator overtravel design ensures safety on the toughest jobs

  • Edco Magna-Trap Heavy Duty Propane Floor Grinder

    $11,767.50 – $13,307.40

    Questions? Call us at (866) 812-6252

    • 22″ Working Width grinds approximately 500 sq. ft. per hour at 1/32″ – 1/16″ per pass with Magna-Trap® Dyma-Dots
    • Includes 2-Slide-On Multi-Accessory Discs, which accept all EDCO Magna-Trap® Tooling
    • 2-3″ Vacuum Port and Water Port
    • 6 Magna-Trap® Tooling accessories required per loading
    • Fully adjustable rubber dust shroud
    • Optional triangular polishing head for full coverage available

  • Husqvarna BS 110 Floor Scraper

    $11,812.00

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. BS 110 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. BS 110 has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor scraper requires almost no maintenance to keep running at peak performance. BS 110 has a standard transport wheel on the front of the machine for ease of transportation on and off sites. It is a very quiet machine that is easy to operate with minimum vibrations. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.
  • American Sanders American 8 Drum Sander

    American Sanders American 8 Drum Sander

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The American 8 & 12 Drum Sanders are the worldwide benchmark for professional drum sanding equipment. Its rugged cast aluminum construction, powerful motor and unique operating and drum leveling controls combine to make the most aggressive and most productive drum sander available. Features:
    • Totally enclosed 7.5 HP (peak) motor runs cooler and eliminates internal dust build-up.
    • Drum Pressure Control allows infinite pressure variation for all types of wood.
    • Heavy-duty vacuum fan and high filtration dust bag provide efficient dust recovery and containment.
    • Unique “feathering” drum lowering handle eases operation.
    • Dynamically balanced drum reduces vibration and chatter marks.
    • Three wheel options for sanding on all types of wood.
  •

    SPE DFG 500 Floor Grinder (Demo Unit)

    Request a Quote

    Questions? Call us at (866) 812-6252

    SPE DFG 500 Floor Grinder

    Very little usage on these demo units. Regular price is $14,000. 2 units available. Free shipping to a commercial loading dock.
  • American Sanders American 12 Drum Sander for sale

    American Sanders American 12 Drum Sander

    Request a Quote

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The American 8 & 12 Drum Sanders are the worldwide benchmark for professional drum sanding equipment. Its rugged cast aluminum construction, powerful motor and unique operating and drum leveling controls combine to make the most aggressive and most productive drum sander available. Features:
    • Totally enclosed 7.5 HP (peak) motor runs cooler and eliminates internal dust build-up.
    • Drum Pressure Control allows infinite pressure variation for all types of wood.
    • Heavy-duty vacuum fan and high filtration dust bag provide efficient dust recovery and containment.
    • Unique “feathering” drum lowering handle eases operation.
    • Dynamically balanced drum reduces vibration and chatter marks.
    • Three wheel options for sanding on all types of wood.
  • National 8274-4 Floor Grinder for sale

    National 8274-4 Floor Grinder

    $13,181.19

    Questions? Call us at (866) 812-6252

    The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing. SAFETY
    • Dual rear vacuum ports
    • Removable handle and weights for easy transport
    COMFORT
    • Three-part adjustable angle handle
    PERFORMANCE
    • Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
    • Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
    • Variable speed control
    • Flip-style weights for added or decreased head pressure
    • 18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
    • Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
    • Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry

  • Husqvarna PG 540 Floor Grinder

    $13,600.68 – $15,276.54

    Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The PG 540 (5.5 hp / 4.0 kW) is a powerful, compact and versatile planetary floor grinder perfect for smaller jobs. Available in both single phase and three phase. It combines a smart compact design for easy transportation with real work-horse performance and sheer grinding power. Thanks to the split-chassis design, the PG 540 fits in most standard cars.
  • Edco 5 Head Crete-Crusher for sale

    Edco 5 Head Crete-Crusher

    $14,627.99

    Questions? Call us at (866) 812-6252

    MODEL: CD-5
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 160 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation
    • Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Five, 5 Point Carbide Bits included

Title

Sales, Service, Parts & Rental Since 1977

At Jordan Power Cleaning Equipment we are dedicated to providing industry leading service along with the largest selection of industrial cleaning and surface preparation equipment in the greater Midwest. Additionally, our customers deserve top quality and are of the highest priority. For any questions or concerns please contact us at 1 (866) 812-6252 today and we will happily assist you!

Jordan Power Cleaning Equipment © 1977 - 2020
Go to Top