Industrial Cleaning & Surface Preparation Equipment Specialists (866) 662-6710
  • Questions? Call us at (866) 812-6252

    Factory Cat's MICROMINI Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The MICROMINI Walk Behind Floor Scrubber comes equipped with a Traction drive which includes a powerful all-gear transaxle for climbing ramps and max operator ease or a Pad Assist version.

    While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the MICROMINI Floor Scrubber Dryer easy to maneuver into tight areas, and simple to service. The deck is protected by steel guards and large polyurethane rollers to keep the unit from marking walls.

    The MICROMINI Scrubbers are available with Disk scrub heads.

    • Disk: Popular in most applications where general cleaning is a concern.
  • Questions? Call us at (866) 812-6252

    Factory Cat's GTX Rider Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The GTX Floor Scrubber Dryer comes equipped with a powerful front-wheel drive for climbing ramps and max operator ease.

    While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the GTX Floor Scrubber Dryer easy to maneuver and simple to service. The deck is protected by heavy duty metal shrouds or large polyurethane rollers to keep the unit from marking walls and your investment safe.

    The GTX Scrubbers are available with Disk and Cylindrical scrub heads.

  • Questions? Call us at (866) 812-6252

    34 and 34HD Industrial Walk Behind Sweeper

    Factory Cat's Floor Sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.

    The Factory Cat model 34 Walk Behind Sweeper is the machine that built our company. A Industrial Sweeper famous for its ability to survive decades in the harshest applications: including mines, brick manufacturing and rugged steel mills. Designed almost 25 years ago, this floor sweeper can sweep through thick saw dust found in furniture manufacturing plants and the dust in paper mills. Bulk powder packaging clients with concrete powder or copier toner like its sweeping power without it blowing dust everywhere. The battery powers the sweeper for over 4 hours on a single charge and the sweeping broom is self adjusting for wear.

    34 Walk Behind Sweeper Specs:

    • Dimensions (L x W x H): 58" x 31" x 38"
    • Weight: 450 lbs.
    • Main Broom (L x Dia): 26" x 10"
    • Side Broom Size: 17"
    • Cleaning Width: 34"
    • Cleaning Rate (sq. ft/hr): 30,000
  • Questions? Call us at (866) 812-6252

    TR Rider Industrial Floor Sweeper

    Factory Cat's Floor Sweepers sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.

    The Factory Cat model TR's design was built from the success of our Model 34 walk behind sweeper. The TR's side brooms sweep up dirt in the corners while a huge tubular sweeping broom under the machine sweeps up the dirt and debris from the floor and packs it into the steel hopper. Meanwhile, the second stage vacuums up the dust and traps it in a polypropylene felt "baghouse" filter. Factory Cat's Industrial floor sweepers can pick up whole bags of cement at a time without leaving a trace of dust behind.

    TR Rider Floor Sweeper Specs:

    • Dimensions (L x W x H): 64" x 37" x 55"
    • Weight: 1,350 lbs.
    • Main Broom (L x Dia): 32" x 10"
    • Side Broom Size: 17" (x2)
    • Cleaning Width: 46"
    • Cleaning Rate (sq. ft/hr): 60,500
  • Questions? Call us at (866) 812-6252

    Models: CPM-10G, CPM-10E
    • 10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
    • 1/4” steel frame
    • Heavy-duty, oversized bearings
    • Weighs 299 lbs. with cutters
    • Tethered emergency stop switch
    • Larger 6” wheels in the rear for easy handling
    • Gasoline or Electric models available
    • Vacuum port standard for dust-free cutting
    • 6-Shaft and 8-Shaft easy change, side loading drums available
    • Tungsten carbide or steel cutters available
  • Questions? Call us at (866) 812-6252

    MODELS: CPU-10FC-G, CPU-10-FC-E
    • 10″ working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8″
    • Adjustable depth control up to 3/16″ working depth per pass
    • Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
    • Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
    • Includes lifting bail, oil alert and hour meter
    • Optional outrigger axle enables the CPU-10(FC) to follow slab contours closely when working on uneven surfaces
    • Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes
  • Questions? Call us at (866) 812-6252

    MODEL: CD-5
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 160 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation
    • Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Five, 5 Point Carbide Bits included
  • Questions? Call us at (866) 812-6252

    MODEL: CD-3
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 100 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Three, 5 Point Carbide Bits included
  • Questions? Call us at (866) 812-6252

    MODEL: TLR-7

    Remove traffic lines from asphalt – and get the job done quickly!

    EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones. Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
    • 7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
  • Questions? Call us at (866) 812-6252

    MODEL: KL-14
    • 14” Blade Capacity
    • Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
    • Heavy-Duty Box Frame Construction
    • Laser Fabricated Thick Steel Material
    • Easy-Use Hand Wheel Depth Control
    • Misting system for wet cutting
    • Thick steel blade guard for added safety
    • Easy access belts and bearings for fast maintenance
    • Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint
  • Questions? Call us at (866) 812-6252

    Model: KL-18 BLADE NOT INCLUDED
    • 18″ blade capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail (optional)
    • 13 HP gasoline engine
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • High quality molded rubber wheels
  • Questions? Call us at (866) 812-6252

    Model: DS-20 BLADE NOT INCLUDED
    • 20″ Blade Capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Heavy-Duty Anti-Vibration engine mount!
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail for easy loading and unloading
    • 13 HP gasoline engine or 7.5 HP electric options
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • Solid-Steel lifting handles
    • High quality molded rubber wheels
  • Edco 20″ Self-Propelled Saw

    $10,035.45$12,971.58

    Questions? Call us at (866) 812-6252

    Model: SS-20
    • Stressproof, precision-machined, 1 3/4″ steel arbor shaft
    • Includes electric start, 12-volt battery and heavy-duty 15-amp charging system
    • Swing-away, rear 3-gallon fuel tank
    • Screw-type depth control w/lock guarantees accurate cutting
  • National 5625 Ride-On Scraper

    $38,028.13$41,550.60

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
    • Larger/deepened forklift pockets
    • Nonmarking tires
    • Compact design fits through standard door frames and elevator doors
    • Improved exhaust system meets federal OSHA regulations
    • Front caster wheels allow increased maneuverability in tight spaces
    • 12-volt LED light for increased visibility on the jobsite
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs. This is a special order machine. Please contact us for more information and lead times. Additional carts, power packs and chargers are available for purchase if you require longer run times.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
    • Quick-change swivel head
    • Extra weight compartments
    • Larger/deepened forklift pockets
    • Nonmarking tires
    • Trailer hitch
    • Flip-up back lid for quick and easy battery changing
    • Front debris deflector protects machine from loose material
    • Front caster wheels allow increased maneuverability in tight spaces
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
    • Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Transport-wheel rack hanger on back of handle
    • Adjustable wheel scrapers prevent material buildup during operation
    • Patented isolator overtravel design ensures safety on the toughest jobs
  • Questions? Call us at (866) 812-6252

    1 Available  Please contact us for delivery and lead times Click here for the full National Flooring Equipment catalogue The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
    • Self-contained, limited-maintenance hydraulic fluid
    • Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Design incorporates nine isolators for the toughest jobs
    • Patented isolator overtravel design ensures safety on the toughest jobs
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more. A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.
    • Angle-adjustment wheel changes pitch of the blade in seconds
    • 1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
    • Removable front weight provides additional down pressure and facilitates easy loading/unloading
    • Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces. Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
    • Variable speed, 12 to 50 feet per minute
    • Self-contained, limited-maintenance hydraulic fluid
    • Removable 49-pound saddle weight helps increase or decrease down pressure and traction
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • National 5700 Ride-On Scraper

    $43,736.56$50,132.18

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions. 5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated. 5700HS: Designed to cover more space in less time; specifications made to order. Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
    • Quick-change swivel head blade holder
    • Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
    • Nonmarking tires
    • Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
    • Compact design fits through standard door frames and elevators doors
    • Front caster wheels allow increased maneuverability in tight spaces
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
    • Nonmarking tires
    • AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
    • Compact design fits through standard door frames and elevator doors
    • Heavy-duty 3000 PSI wheel motors
    • Front caster wheels allow increased maneuverability in tight spaces
    • LED light for increased visibility on the jobsite
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
    • 21-inch nonmarking tires
    • Compact design fits through standard door frames and elevator doors
    • Hydraulic brake system automatically engages when the machine is in the off position
    • Front caster wheels allow increased maneuverability in tight spaces position
    • Improved exhaust system meets federal OSHA regulations
    • LED light for increased visibility on the jobsite
  • Questions? Call us at (866) 812-6252

    The new and improved GP700 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor.
    • Adjustable shroud incorporates a brush for a 360-degree air intake
    • Rear spring suspension allows for a more even prep over uneven surfaces
    • Forward/rear locking pitch-adjustable axle that allows the operator to change the angle of the head pressure from the front to the back to compensate for inclines/declines on uneven surfaces
    • Soft, regular, or hard couplers available for varying floor conditions
    • New stainless steel, 7-gallon water tank
    • Control box includes variable-speed soft start, forward and reverse functionality
  • Questions? Call us at (866) 812-6252

    The GP3000 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor. The 28-inch cleaning path and increased grinding head pressure make this an ideal machine for commercial and industrial projects.
    • Adjustable shroud incorporates a brush for a 360-degree air intake
    • Rear spring suspension allows for a more even prep over uneven surfaces
    • Soft, regular, or hard couplers available for varying floor conditions
    • New stainless steel, 20-gallon water tank
    • Control box includes variable-speed soft start, forward and reverse functionality
  • Questions? Call us at (866) 812-6252

    The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
    • DL3000 Dust Collector, 230 V
    SAFETY
    • Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    PERFORMANCE
    • Primary filter
    • Heavy-duty, anti-static collection hose provides durability and safety
  • Questions? Call us at (866) 812-6252

    The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
    • DL2000 Dust Collector, 115 V
    SAFETY
    • Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    • Heavy-duty, anti-static collection hose provides durability and safety
    PERFORMANCE
    • Primary filter
    • State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
  • Questions? Call us at (866) 812-6252

    Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency. SAFETY
    • Quick-release levers allow the machine to be separated into two pieces for easy transport
    • LED light illuminates the surface directly behind the machine
    COMFORT
    • Fully adjustable handle accommodates a range of operating positions
    PERFORMANCE
    • Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
    • Removable weights give the operator freedom to increase or decrease head pressure when grinding
    • 16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
    • Dual-speed motor increases the versatility of this machine; operating at high or low speed
  • Questions? Call us at (866) 812-6252

    Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal. SAFETY
    • Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
    • Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud
    COMFORT
    • Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue
    PERFORMANCE
    • Accommodates multiple styles of diamond turbo cup wheels
  • Questions? Call us at (866) 812-6252

    Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal SAFETY
    • Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
    • Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud
    COMFORT
    • Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue
    PERFORMANCE
    • Accommodates multiple styles of diamond turbo cup wheels
  • Questions? Call us at (866) 812-6252

    This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames. SAFETY
    • Loop handle enables precision handling
    PERFORMANCE
    • Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
    • Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion
  • Questions? Call us at (866) 812-6252

    The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing. SAFETY
    • Dual rear vacuum ports
    • Removable handle and weights for easy transport
    COMFORT
    • Three-part adjustable angle handle
    PERFORMANCE
    • Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
    • Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
    • Variable speed control
    • Flip-style weights for added or decreased head pressure
    • 18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
    • Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
    • Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
  • Questions? Call us at (866) 812-6252

    Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition. TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
  • Questions? Call us at (866) 812-6252

    The 225BU Electric Floor Burnisher offers:
      • Anti-fatigue soft touch handle design
      • Compact shroud to allow burnishing next to wall
      • Non-conductive, commercial grade switch housing
      • Toggle flip adjustable handle for easy operation
      • Full pad-to-floor contact with no compensating castor
      • Flexible pad driver to reduce floor “burning”
      • Dual lever on/off safety switch for left or right hand operation
      • 5” (13 cm) non-marking, self-lubricating transport wheels
      • 50 ft. (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
      • No slip, micro-V belt drive transmission
      • 1.5 HP D.C. rectified UL recognized motor
  • Questions? Call us at (866) 812-6252

    The 225BU Electric Floor Burnisher offers:
      • Anti-fatigue soft touch handle design
      • Compact shroud to allow burnishing next to wall
      • Non-conductive, commercial grade switch housing
      • Toggle flip adjustable handle for easy operation
      • Full pad-to-floor contact with no compensating castor
      • Flexible pad driver to reduce floor “burning”
      • Dual lever on/off safety switch for left or right hand operation
      • 5” (13 cm) non-marking, self-lubricating transport wheels
      • 50 ft. (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
      • No slip, micro-V belt drive transmission
      • 1.5 HP D.C. rectified UL recognized motor
  • Questions? Call us at (866) 812-6252

    The 300BU is a battery operated Ultra-High Speed (“UHS”) burnisher that rapidly produces high levels of gloss on VCT, polished concrete and other hard floor surfaces. The 300BU features SteadyOne™ pad control technology that dramatically improves the performance and life span of burnishing pads while producing excellent single-pass results. This powerful burnisher is available in 20″, 24″, 27″, 28″, and 30″ models. The 300BU comes with a dust control filter system for clean, quiet and efficient burnishing. Powered by three 12-volt 228 AH batteries, the 300BU can burnish over 26,000 square feet per hour (2400 square meters) and producing only 67 decibels of soft noise. Clean, safe and effective, the 300BU is a burnisher you can count on to maintain floors at any hour in any facility. Do you ever get inconsistent results with your battery burnisher? It may be because your burnisher doesn’t have the ability to adjust to changing conditions. The 300BU does. With Steadyone Technology built into every 300BU, the burnishing head automatically adjusts to changing floor conditions and changing pad conditions, producing consistent results every time. Exclusive to the 300BU, this “smart” adjustment produces great results – fast – in just a single pass. SteadyOne™ uses advanced fluid drive technology to maintain constant pad pressure and produce more consistent results. Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today … and tomorrow.
  • Questions? Call us at (866) 812-6252

    The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

      For Sale, The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder. The machine comes equipped with a padholder and is available with an optional solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder. The machine comes equipped with a padholder and is available with an optional solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding, and coating removal. RELIABLE PERFORMANCE • 1.5 HP, 2 speed, high torque motor • Driver speed 175 or 300 rpm • Strong triple planetary gearbox • Rugged, all metal construction • Non-conductive, commercial grade switch housing SUPERIOR PRODUCTIVITY • 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr) • 2.5 gal. (9,5 liter) no-spill solution tank • Dust containment port for dry applications • Splash/dust skirt for wet applications • HydraShine diamond driver uses a passive planetary system for a superior polish
  • Questions? Call us at (866) 812-6252

    The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors. Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class. The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
  • Questions? Call us at (866) 812-6252

    The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces. Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface. Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class. The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.  
  • Questions? Call us at (866) 812-6252

    A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine. VERSATILE • Strip, deep scrub, and scrub • 2.5 gal. (9,5 liter) solution tank PRODUCTIVE • 120V 1 HP totally enclosed motor • 12” x 18” (30,5 cm x 45,8 cm) pad size • 3,600orbits per minute • 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug USER FRIENDLY OPERATION • Adjustable, anti-fatigue soft-touch handle • Dual lever on/off safety switch for left or right hand operation • Large, non-marking, transport wheels
Go to Top