This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames.
SAFETY
Loop handle enables precision handling
PERFORMANCE
Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The 5000DL is a compact, ride-on floor scraper. Featuring the same technology as our patented line of scrapers, this machine is designed with a low-profile frame that increases ease of transport and maneuverability on the job.
Power Supply: Battery 48V
Width: 24.5"
Height: 48"
Length: 63"
Weight: 2,105 lb
Removable Weight: 445 lb
Speed: up to 160 ft/min
Voltage & Frequency: 115V/60Hz
Click here for the full National Flooring Equipment catalogue
The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs.
This is a special order machine. Please contact us for more information and lead times.
Additional carts, power packs and chargers are available for purchase if you require longer run times.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head
Extra weight compartments
Larger/deepened forklift pockets
Nonmarking tires
Trailer hitch
Flip-up back lid for quick and easy battery changing
Front debris deflector protects machine from loose material
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces.
Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
Removable 49-pound saddle weight helps increase or decrease down pressure and traction
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Click here for the full National Flooring Equipment catalogue
The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more.
A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.
Angle-adjustment wheel changes pitch of the blade in seconds
1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
Removable front weight provides additional down pressure and facilitates easy loading/unloading
Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Click here for the full National Flooring Equipment catalogue
The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Larger/deepened forklift pockets
Nonmarking tires
Compact design fits through standard door frames and elevator doors
Improved exhaust system meets federal OSHA regulations
Front caster wheels allow increased maneuverability in tight spaces
12-volt LED light for increased visibility on the jobsite
Click here for the full National Flooring Equipment catalogue
Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions.
5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated.
5700HS: Designed to cover more space in less time; specifications made to order.
Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Nonmarking tires
Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
Compact design fits through standard door frames and elevators doors
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more.
The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Transport-wheel rack hanger on back of handle
Adjustable wheel scrapers prevent material buildup during operation
Patented isolator overtravel design ensures safety on the toughest jobs
Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
Unit is available at our Tallmadge, Cleveland, Columbus, Toledo Ohio & Rockledge Florida Locations. The Rockledge Florida branch serves the Greater Orlando area. Limited delivery options are available. Please contact us for more information.
1 Available Please contact us for delivery and lead timesClick here for the full National Flooring Equipment catalogue
The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Design incorporates nine isolators for the toughest jobs
Patented isolator overtravel design ensures safety on the toughest jobs
Click here for the full National Flooring Equipment catalogue
Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
Nonmarking tires
AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
Compact design fits through standard door frames and elevator doors
Heavy-duty 3000 PSI wheel motors
Front caster wheels allow increased maneuverability in tight spaces
Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
Click here for the full National Flooring Equipment catalogue
This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
21-inch nonmarking tires
Compact design fits through standard door frames and elevator doors
Hydraulic brake system automatically engages when the machine is in the off position
Front caster wheels allow increased maneuverability in tight spaces position
Improved exhaust system meets federal OSHA regulations
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing.
SAFETY
Dual rear vacuum ports
Removable handle and weights for easy transport
COMFORT
Three-part adjustable angle handle
PERFORMANCE
Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
Variable speed control
Flip-style weights for added or decreased head pressure
18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
DL2000 Dust Collector, 115 V
SAFETY
Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
Heavy-duty, anti-static collection hose provides durability and safety
PERFORMANCE
Primary filter
State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
DL3000 Dust Collector, 230 V
SAFETY
Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
PERFORMANCE
Primary filter
Heavy-duty, anti-static collection hose provides durability and safety
The GP3000 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor. The 28-inch cleaning path and increased grinding head pressure make this an ideal machine for commercial and industrial projects.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 20-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
The new and improved GP700 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Forward/rear locking pitch-adjustable axle that allows the operator to change the angle of the head pressure from the front to the back to compensate for inclines/declines on uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 7-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
SAFETY
Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine
COMFORT
Fully adjustable handle accommodates a range of operating positions
PERFORMANCE
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed
Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition.
TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
Rogue is the newest Walk-behind Scraper from National. This all-electric scraper has an infinitely adjustable blade angle and powers through both hard and soft goods removal. Simplified toggle controls, increased travel speed, and fewer loose parts are a few of the features that set this machine apart. Designed as a solution for the global surface prep market, Rogue works in any country with the simple swap of a cord.
A non-acid cleaner and disinfectant for use in a wide range of facilities: schools, hospitals, nursing homes;
anywhere where infection prevention is of prime importance
DISINFECTION, DEODORIZING AND CLEANING
Remove gross filth or heavy soil prior to application of the product. Hold container six to eight inches from
surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and the
surface to remain wet for 3 minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1
minute and for HBV and HCV 5 minutes). No scrubbing is necessary. Wipe off with a clean cloth, mop or
sponge. The product will not leave grit or soap scum.
One-step cleaning and disinfection of toilet bowls and urinals:
Remove water from bowl by forcing water over trap with a swab mop applicator. Press swab mop against
side of the bowl to remove excess water from applicator. Apply 1 to 2 ounces of this product evenly,
allowing sufficient time for product to cover entire surface of bowl for maximum cleaning. Swab
bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 3
minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1 minute and for HBV and HCV 5
minutes) and flush.
Remediation, air scrubbing, restoration, healthcare, and clean rooms are only a few applications for the new Novair 700 portable air filtration unit. Available in a variety of power sources (115v-220v 50/60Hz) and filter configurations.• More power: The Novair 700 is the most powerful impeller driven variable speed adjustment, is capable of delivering 200-700 CFM and dramatically increases filter life.
• Versatility: The Novair 700 portable air filtration is at home in applications ranging from asbestos removal, restoration projects, airborne pathogens and medical uses. The tri gasketing and HEPA filter sealing flange, guarantee leak proof operation. The quick release intake door accepts MERV, carbon, and standard dust filters. Integrated nesting allows for the stacking of multiple machines. The built-in GFCI outlet allows you to connect multiple equipment up to 15 amps.
• Virtually indestructible: The heavy duty roto molded polyethylene shell, is dent proof, leak proof and virtually indestructible.
• Standard filters: 16” x 16” x 3” high capacity HEPA filter is standard. No outrageously priced proprietary filters needed. These economical filters are readily available.
• Low power requirements: Drawing only 3 amps, the 700 can be daisy chained up to three units. The built in GFCI outlets allow for safe and effective operation. The Novair’s straight through design makes it ideal for virtually any application.
• Utilizes standard "Lay flat" or flex ducting: 10 to 12 inch vacuum ports allows for maximum airflow with little restriction.
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our smallest, most compact inline scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
12CS100 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's Inline Needle & Chisel Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Vibration Reduced scalers (VRS) offer similiar impact and functionality as our standard scalers but with dramatically reduced vibration levels providing more operator safety along with further comfort.
Features & Benefits
• small lightweight compact scalers
• 2200-3800 blows per minute gives maximum performance
• 2mm, 3mm Flat or 3mm chisel Tip Needles (Needle Scaler Models}
• 3/4", 1", 2", 3" heavy duty 1/2" square shank chisels (Chisel Scaler Models)
• Steel components offer durability and long-life
• Low air consumption allows for use on small, portable compressors
• Converts to either a chisel or needle scaler in seconds
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our smallest, most compact inline scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds12NS100 -Needle Scalers
• Equipped with 12pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
Novatek’s line of pneumatic & electric HEPA floor vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous and non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Applications
• High capacity cleanup
• Liquid pickup with optional wet/dry adapter
• Asbestos removal
• Use with dust-free power tool systems
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 15 gallon cold rolled steel finished exterior with epoxy coated interior
• 4 stages of filtration assures long HEPA life
• Individually tested and certified HEPA filters
• Front swivel casters, large rear wheels for easy transport
• Air filter/dryer standard (pneumatic models only)
• 25’ heavy duty power cord (electric models only)
• Includes 6' of crush proof 1.5" vacuum hose
• Optional wet/dry float
Novatek’s line of pneumatic & electric HEPA floor vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous and non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Applications
• High capacity cleanup
• Liquid pickup with optional wet/dry adapter
• Asbestos removal
• Use with dust-free power tool systems
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 15 gallon cold rolled steel finished exterior with epoxy coated interior
• 4 stages of filtration assures long HEPA life
• Individually tested and certified HEPA filters
• Front swivel casters, large rear wheels for easy transport
• Air filter/dryer standard (pneumatic models only)
• 25’ heavy duty power cord (electric models only)
• Includes 6' of crush proof 1.5" vacuum hose
• Optional wet/dry float
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS100 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact vibration reduced scaler
• Inline configuration allows for access of tight areas
• Steel components offer durability and long-life
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration.
• Operator safety and comfort
VRS019CS -Inline Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19NS100 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
Novatek's 19 Inline Chisel and Needle Scaler is our smallest, most compact line of scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Powerful, light-weight and compact inline scaler
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19NS100 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Oval front tube concentrates needles
• Sliding oval front tube adjusts for needle wear
The 19 Inline Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 19 Inline VRS scalers are our most light-weight and compact vibration scalers. These models significantly decreases the possibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact vibration reduced scaler
• Inline configuration allows for access of tight areas
• Steel components offer durability and long-life
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration.
• Operator safety and comfort
VRS019NS -Inline Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Tool-less needle replacement for easy field replacement
• Dust collection shrouds available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 19 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most compact pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
19CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's vacuum shrouded "VSE" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. Our VSE scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
19SVSE120 -Needle Scalers
• Equipped with 19pcs -3mm x 7" chisel tip needles
• 3000 blows per minute
• 2mm Optional Needle Holders available
• Lighter in weight for longer run times
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 28 Pistol Grip Scalers provide a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful pistol grip scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 2200 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
28CS120 -Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek's vacuum shrouded standard "VSE" and vibration reduced "VRS" needle scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas. Our shrouded scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 2200-3000 blows per minute gives maximum performance
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• Steel components offer durability and long-life
• 2mm Flat & 3mm Flat or chisel Tip Needles available
• Vibration dampening technology (VRS Models)
• Tool-less needle change out (VRSModels)
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
Novatek's shrouded vibration reduced "VRS" needle scalers provide a thorough effective method of removing coatings, corrosion and other accumulated materials. The VRS scalers are a must have for any Dust-Free project due to their ability to work on irregular surfaces and access difficult to reach areas.
Features
• Vibration dampening technology
• Tool-less needle change out
• Flexible, interchangeable nose pieces for flat surfaces, corners, and angles.
• 3mm chisel tip needles standard
• Fully adjustable front vacumm take-off
• Standard 1.5” vacuum take-off
• 2mm Flat & 3mm Flat or chisel Tip Needles available
Benefits
• Specialy designed for abatement and remediation work
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles, rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip for operator comfort
• Low air consumption allows for use on small, portable compressors
28NSVSE110 -Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2200 blows per minute
• 2mm Optional Needle Holders available
• More power for faster production times
The 28PG Vibration Reduced Scalers (VRS) have all the impact and functionality of our standard range with dramatically reduced vibration levels. The 28PG VRS scalers are our most powerful pistol grip vibration scalers.These models significantly decreases the posibility of vibration related injuries. All the power with less vibration.
Features & Benefits
• Our most compact, pistol grip vibration reduced scaler
• Pistol grip configuration is ergonomic and comfortable
• Steel components offer durability and long-life
• 3000 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
• Dramatic decrease in vibration
• Operator safety and comfort
VRS028NPG -Pistol Grip Needle Scalers
• Equipped with 28pcs -3mm x 7" chisel tip needles
• 2mm Optional Needle Holders available
• Tool-less needle replacement for easy field replacement
• Dust collection shrouds available
Novatek’s durable line of pneumatic & electric HEPA backpack vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous or non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s HEPA backpack vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 3.3 gallon stainless steel backpack recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac. in seconds
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only)
• Tool on/off valve attached to vacuum (pneumatic model only)
• Includes 6' of crush proof vacuum hose
Novatek’s durable line of pneumatic & electric HEPA backpack vacuums are designed for removal of lead, asbestos, mold, ceramic dust, fiberglass and many other hazardous or non-hazardous materials.
Designed to work flawlessly with our VSE product line for use in abatement, remediation, clean rooms, hospitals, and industrial applications or wherever pollutants exist.
Novatek’s HEPA backpack vacuums includes a critical HEPA filter, pre-filters along with disposable filter bags designed to contain & recover more dirt than any other vacuum cleaner in its class.
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Perfectly matched to our VSE power tools
• 3.3 gallon stainless steel backpack recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac. in seconds
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only)
• Tool on/off valve attached to vacuum (pneumatic model only)
• Includes 6' of crush proof vacuum hose
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
The 35 Offset Scalers provide a thorough and effective method of removing coatings, corrosion and many other accumulated materials. This heavy duty offset scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.
Features & Benefits
• Our most powerful offset scaler
• Powerful and light-weight
• All steel components offer durability and long-life
• 1800 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Converts to needle or chisel scaler in seconds
35CS100 -1/2" Chisel Scalers
• 1/2” square shank chisel holder
• Equipped with 3/4" wide chisel as standard
• 2", 3" & 2 3/8" Bent Chisels available
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Air Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Lightweight but powerful 1.2 hp drive motor
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from Roto-Peen flaps to cutter hubs in minutes
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek’s versatile, high production Electric Roto-Peen / Hand-Held Scarifiers are ideal for removing coatings from both steel and concrete surfaces. Quick change hubs with an assortment of abrasives enable rapid removal of mastics, alkyds to epoxy coatings while containing hazardous or non-hazardous dust.
Features
• Available in 2” or 4” models
• Powerful 1200 watt electric motor (110v & 220v Models)
• Offered with 3M Roto-Peen flaps or carbon steel cutters
• Rollers allow for use on curved surfaces
• Compact design for tighter access
• Works up to 1.5” from walls
• Quick change hubs and abrasives
• Designed for horizontal applications
• Integrated vacuum shroud
• Dust-free when used with compatible vacuum system
• Converts from flap hub to cutter hub in minutes, (excluding 4” elec. models)
• Available in kit form
Benefits
• 2” model is lighter and ideal vertically and overhead use
• 4” model is best for horizontal surfaces
• High production rates on flat surfaces
• Works on curved surfaces and piping
• Standard 1.5” vacuum port allows for dustless operation
• Accepts other abrasives for coatings or materials removal off concrete or steel
• Meets OSHA & EPA standards easily when matched with our HEPA vacuums
• Imitates shot blast finish when equipped w/RotoPeen Flaps
• High production on decks and flooring
• Perfect for heavy coating removal
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's ultra light-weight Aluminum Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. These aluminum scraper/scalers are lighter than our steel models while offering the same power making them perfect for walls and ceilings.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Aluminum Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel internal components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”,8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek's steel Long Reaches are versatile air powered scrapers/scalers two tools in one, designed to reduce the risk of back injury and to extend their use into previously inaccessible areas.
A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials, tank cleaning and much more with our chisel and scraper attachments. Remove coatings, rust, and scale with our needle attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services.
Features & Benefits
• Heavy-duty steel ball retainer
• Rugged Steel Construction
• Padded comfort grip
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
• Long Reach Needle Scalers equipped with 28-3mm chisel tip needles
• Sliding front tube adjusts for needle wear
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek’s 5" & 7" Air & Electric Dust-Free Grinders are the choice for your toughest challenges. Grind steel or concrete with virtually no dust. Our multiple power configurations and wide assortment of abrasives, allows us to fit a tool to meet your highest expectations.
Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1,300W electric (110v & 220v) or 1.2hp pneumatic air drive motors
• Floating dust shrouds maintain vacuum seal
• Replaceable wear skirts
• Side handle included
• Utilizes a wide assortment of abrasives
Benefits
• Multiple grinder sizes and discs for varied work
• Powerful drive units handle heavy loads and maintain production
• Floating shrouds conform to work surface for dustless operation
• Disposable wear skirts saves aluminum shroud from wear
• Comfort handles allow for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a wide range of abrasives
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0020 - Workhead Kit
• Workhead complete with all its accessories
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
CBS0021 - Workhead w/Roller Kit
• Workhead complete with all its accessories
• Workhead Roller Attachment
• 1 x #4 Blasting Nozzle
• 2 x Internal Corner Brushes
• 2 x External Corner Brushes
• 2 x 2" Steel Wear Sleeves
• 2 x 4" Steel Wear Sleeves
Novatek's Vacuum Blasting Workheads are designed to work seamlessly with either our Contained Blast Systems "CBS" or most existing blasting equipment within the industry. Its compact design and lightweight make this the preferred vacuum blasting Workhead in the industry.
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard 3/4" blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for increased workhead life
• Multiple brushes available for coating removal on flat, inside corner and outside edge surfaces
• 3" blast pattern
• Can be fitted to most existing blast equipment
Novatek's "Ergo" ergonomic designed Long Reach has a unique "S" shape designed to reduce back strain. A vast range of applications include the removal of vinyl flooring, ceramic tile, ice, roofing materials and much more with our chisel and scraper attachments. These tools are ideal for a variety of uses from construction and marine to general factory maintenance or flooring services. To help save on backaches, try utilizing our ergonomically designed Python Long Reach.
Features & Benefits
• Curved steel configuration for added comfort
• Vibration reducing top handle standard
• Nylon shoulder strap for operator comfort and reducing operator fatigue
• Heavy-duty steel ball retainer
• 2200 Blows per minute of hitting power
• All steel components offer durability and long life
• Chisel ranging from 1, 2, and 4” for ceramic tile and thin-sets
• 4”, 8" and 12” extra sharp scraper blades for sheet goods and mastics
• Easily converts to a long reach scraper or needle scaler in seconds
• Efficient, using only 5 SCFM of compressed air
• Runs off a portable compressor
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seal cleans piston on every stroke
• Brush seal technology helps extend piston life
• Screw top cap for simple head and piston replacement
• Single piece piston and tips assure durability
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
Novatek’s Triple Head "3SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications.
Designed for steel or concrete surfaces our 3SH scaling hammers provide rapid take-down of concrete, remove high-build coatings, texture concrete, rust, epoxy and non-skid coating removals.
Proven to be the choice for “fracturing” these thicker, tough to remove materials.
Features benefits
• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Tungsten Carbide Cruciform or Bush Hammer single piece piston-heads
• Nylon brush seals clean pistons on every stroke
• Brush seal technology to extend piston life
• Screw top cap for simple head and piston replacement
• Single pieces piston and tip assures durability
• Two live air inlets allow for either inline or perpendicular handle configurations (3 head hammer only)
The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device.
Features & Benefits
• Focused water stream reaches heights of 100ft. or more (30 meters or more)
• Corrosion resistant, solid stainless steel body
• Heavy-duty tripod provides a rugged and stable platform
• No moving parts to wear
• Swiveling head allows for simple operation
• Integrated “ball valve” for regulating jet stream and pressure
• Easy quick cam connections for easy and rapid connection of hoses
• Recognized anti-piracy device
The Hydra Heavy-Duty Water Cannon is designed for the rapid cleaning of cargo holds and ships. Removes build-up, residual materials, flaking paint and debris. Can also be used as an anti-piracy device.
Features & Benefits
• Focused water stream reaches heights of 100ft. or more (30 meters or more)
• Corrosion resistant, solid stainless steel body
• Heavy-duty tripod provides a rugged and stable platform
• No moving parts to wear
• Swiveling head allows for simple operation
• Integrated “ball valve” for regulating jet stream and pressure
• Easy quick cam connections for easy and rapid connection of hoses
• Recognized anti-piracy device
