Industrial Cleaning & Surface Preparation Equipment Specialists (866) 662-6710
  • Hose Assembly - 96 in. 56265753 for ES300 ST, XP and ES400 XLP.
  • Questions? Call us at (866) 812-6252

    Powerful performance. Versatile application. Continuing the legacy of their extremely popular predecessor, the Clarke® BOS-18, Clarke® FM40™ ST & LX Floor Machines are a significant step forward for Clarke orbital scrubbing floor technology. Available in a standard ST version and a feature-rich LX edition, Clarke FM40 floor machines are engineered to give you the ultimate combination of ease of use and versatility. The result is unmatched performance in both wet and dry applications. Don’t let their compact size fool you: Clarke FM40 ST & LX Floor Machines have full 1.5 hp motors, 160 pounds of down pressure and 3,540 rpm pad drivers. That means cleaner floors with fewer passes and less strain on your operators. Do more, work less Featuring standardized 14-inch x 20-inch pad decks, versatile Clarke FM40 ST & LX Floor Machines are ideal replacements for a variety of other equipment, too. In addition to scrubbing small, hard-to-reach areas where large floor scrubbers are simply ineffective, Clarke FM40s also supplement Clarke scrubbers with BOOST® Technology to remove floor finish without chemicals. With the right pads, you can even use Clarke FM40s to clean grout in bathrooms, prep or recoat gym floors, bonnet clean carpet, and burnish terrazzo, marble and concrete. Clean baseboards, too Now you can clean baseboards without having to purchase a separate machine or, worse, getting down on your hands and knees to scrub. Clarke FM40 ST & LX floor machines come standard with an innovative baseboard cleaner that attaches to the front of the machine to provide a fast, convenient solution for those hard-to-clean baseboards.
    • 1.5 hp motor, 3,540-rpm deck and 20 x 14 inch cleaning path quickly buff wide areas
    • Three, 21-lb weights maximize down pressure and cleaning effectiveness
    • Quiet, low-vibration design (68 dB A) allows cleaning in noise-sensitive environments
    • Baseboard attachment eliminates hand cleaning baseboards
    • Wheels-up or wheels-down operating modes allow quick switching from traditional floor machine mode to back-and-forth burnisher mode (LX only)
    • Disassembles without tools to make transport between job sites easy and fast (LX only)
  • Questions? Call us at (866) 812-6252

    Powerful performance. Versatile application. Continuing the legacy of their extremely popular predecessor, the Clarke® BOS-18, Clarke® FM40™ ST & LX Floor Machines are a significant step forward for Clarke orbital scrubbing floor technology. Available in a standard ST version and a feature-rich LX edition, Clarke FM40 floor machines are engineered to give you the ultimate combination of ease of use and versatility. The result is unmatched performance in both wet and dry applications. Don’t let their compact size fool you: Clarke FM40 ST & LX Floor Machines have full 1.5 hp motors, 160 pounds of down pressure and 3,540 rpm pad drivers. That means cleaner floors with fewer passes and less strain on your operators. Do more, work less Featuring standardized 14-inch x 20-inch pad decks, versatile Clarke FM40 ST & LX Floor Machines are ideal replacements for a variety of other equipment, too. In addition to scrubbing small, hard-to-reach areas where large floor scrubbers are simply ineffective, Clarke FM40s also supplement Clarke scrubbers with BOOST® Technology to remove floor finish without chemicals. With the right pads, you can even use Clarke FM40s to clean grout in bathrooms, prep or recoat gym floors, bonnet clean carpet, and burnish terrazzo, marble and concrete. Clean baseboards, too Now you can clean baseboards without having to purchase a separate machine or, worse, getting down on your hands and knees to scrub. Clarke FM40 ST & LX floor machines come standard with an innovative baseboard cleaner that attaches to the front of the machine to provide a fast, convenient solution for those hard-to-clean baseboards.
    • 1.5 hp motor, 3,540-rpm deck and 20 x 14 inch cleaning path quickly buff wide areas
    • Three, 21-lb weights maximize down pressure and cleaning effectiveness
    • Quiet, low-vibration design (68 dB A) allows cleaning in noise-sensitive environments
    • Baseboard attachment eliminates hand cleaning baseboards
    • Wheels-up or wheels-down operating modes allow quick switching from traditional floor machine mode to back-and-forth burnisher mode (LX only)
    • Disassembles without tools to make transport between job sites easy and fast (LX only)
  • Questions? Call us at (866) 812-6252

    Dual speeds, one result: beautiful, high gloss floors, fast Your floors say a lot about the quality of your organization. The Clarke® CFP Pro® 20DS Floor Machine helps ensure years of beautiful, high gloss finishes that are sure to be noticed. Simple. Rugged. Versatile. Featuring rugged, all-metal construction and a high-powered 1.5 hp motor with Dual-Speed rotating action, the Clarke CFP Pro 20DS Floor Machine delivers heavy-duty performance in a wide range of flooring environments. Fingertip controls, handle-mounted lockout switch and safety-yellow cord with convenient cord wrap help maximize safety, simplify use and expedite storage.
    • Two buffing speeds improve floor care productivity
    • All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
    • 1.5 hp motor provides plenty of power
    • Easy-to-use fingertip controls and universal clutch plate make operation simple
    • Handle-mounted, safety lockout switch improves safety
    • 50-foot safety-yellow power cord extends range, then stores easily on convenient cord wrap
  • Questions? Call us at (866) 812-6252

    Tough, well-built buffers Keeping your floors buffed, polished and looking their best is an important, never-ending task that requires tough, long-lasting machines. Clarke® CFP Pro® 17HD and 20HD Floor Machines are built Clarke Tough for years of beautiful, high-gloss floors Simple. Rugged. Affordable. Clarke CFP Pro 17HD & 20HD Floor Machines are all-metal constructed machines that are easy to use, with foot-activated handle locks, fingertip controls, powerful motors and long cords.  Safety features like handle-mounted lockout switches help keep operation safe. And powerful motors get the job done fast.
    • All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
    • 1.5 hp motor provides plenty of power
    • Easy-to-use fingertip controls and universal clutch plate make operation simple
    • Handle-mounted, safety lockout switch improves safety
    • 50-foot safety-yellow power cord extends range, then stores easily on convenient cord wrap
  • Questions? Call us at (866) 812-6252

    Tough, well-built buffers Keeping your floors buffed, polished and looking their best is an important, never-ending task that requires tough, long-lasting machines. Clarke® CFP Pro® 17HD and 20HD Floor Machines are built Clarke Tough for years of beautiful, high-gloss floors Simple. Rugged. Affordable. Clarke CFP Pro 17HD & 20HD Floor Machines are all-metal constructed machines that are easy to use, with foot-activated handle locks, fingertip controls, powerful motors and long cords.  Safety features like handle-mounted lockout switches help keep operation safe. And powerful motors get the job done fast.
    • All-metal construction, including all-steel, triple-planetary gearbox and cast-aluminum chassis, ensures years of dependable operation
    • 1.5 hp motor provides plenty of power
    • Easy-to-use fingertip controls and universal clutch plate make operation simple
    • Handle-mounted, safety lockout switch improves safety
    • 50-foot safety-yellow power cord extends range, then stores easily on convenient cord wrap
  • Clip Bag HC5 12E 56330608 for Nilfisk GD 1000 Series, Advance Carpetriever 28, Champion 28, Advance Carpetriever 28XP, and Nilfisk GU 700.
  • Bag DISP.6PAK 28 56330690 for Advance Carpetriever Wide Area Vacuum.
  • Microstat Filter Kit 56330920 for Advance Carpetriever 28.
  • Filter HC510A 56330573 for Nilfisk GU 700 and Advance Carpetriever 28XP.
  • Charger Battery 36 Volt 21A 41036A for Fusion 20 and 20T, Advolution 20B and 20 BT, Ultra Speed 20 and 20T, and Focus S28 L28 WB.
  • Battery 200AH Wet 12 Volt 871334 for Ultra Speed 20 and 20T, Advolution 20B and 20 BT, 2000B and BT Series II Scrubber, Fusion 20 and 20T, Fusion 201-201X, Vision 21i VisionV, Vision 38I-32I-IX-26I-IX, Encore S30 and L30, Encore S2426 L2426, and Image 26B Wash-Rinse Extractor.
  • Kit Scrub and Vacuum Tool with Caddy 56317136 for Clean Track L24, AquaPLUS - AquaPLUS AXP - Adphibian, and Nilfisk AX 651 Multi EDS.
  • Carpet Wand 12 56265305 for Clean Track 16 18 and 18W-R, AquaClean 16ST 16XP 18FLX 18ST, Clean Track S16 and L18 Extractors, AquaPLUS - AquaPLUS AXP - Adphibian, Nilfisk AX410, and ES300 ST, XP and ES400 XLP.
  • Replacement Shoe 56317097 for Clean Track L24, AquaPLUS - AquaPLUS AXP - Adphibian, and Nilfisk AX 651 Multi EDS.
  • Nozzle Spray 1 56317064 for Nilfisk AX 651 Multi EDS, Clean Track L24, Clean Track 16, 18 and 18 W-R, and AquaPLUS - AquaPLUS AXP - Adphibian.
  • Nozzle Spray 56265052 for ES300 ST, XP and ES400 XLP, Nilfisk AX410, Nilfisk AX 651 Multi EDS, Clean Track L24, Clean Track S16 and L18 Extractors, AquaClean 16ST 16XP 18FLX 18ST, AquaPLUS - AquaPLUS AXP - Adphibian, and Klenzor 16.
  • Coupler Hose 56384042 for Advance Aquaplus AXP Carpet Extractor.
  • 15 Foot Hose Assembly 56265174 for Klenzor 16, Clean Track 12 Extractor, AquaClean 16ST 16XP 18FLX 18ST, Clean Track S16 and L18 Extractors, Clean Track L24, AquaPLUS - AquaPLUS AXP - Adphibian, Nilfisk AX410, and ES300 ST, XP and ES400 XLP.
  • Tote Bag 56315316 for Advance 34RST D, Advance Convertamatic 24D-C, Advance Warrior 28D, Advance Adhancer W28-C and W32-C, AquaPLUS - AquaPLUS AXP - Adphibian, Convertamatic, Clean Track L24, TFC 400 All Surface Cleaner, All Cleaner and All Cleaner XP, and Nilfisk AX 651 Multi EDS.
  • Battery - 6 Volt 420AH Wet 56388582 for Advance Hydro-Retriever 2800 and Advance Hydro-Retriever 3800.
  • Kit Battery Watering 56601527 for Focus II Rider Autoscrubber, Advenger 2800ST and 3400ST, and ES4000 Rider Extractor.
  • Pad Micro Fiber 14 in. 56112734 for Advenger 2800ST and 3400ST and SC750 and SC800.
  • Questions? Call us at (866) 812-6252

    VENOM VN1715 & VN2015 17 or 20 inch, 175 rpm floor machines Benefits of VENOM VN1715 & VN2015 floor machines
    • 17 and 20 inch cleaning paths
    • 175 rpm
    • 1.5 hp, 66-frame motor
    • All-steel triple-planetary gear box
    • All-metal construction
    • 50 foot safety yellow power cord
    • CSA approved
    • Optional 2.5 gallon solution tank
    • Optional 13 and 15 inch deck kits
    • 3-year parts and 2-year labor warranty
  • Viper AS850R Rider Scrubber

    $13,920.00$14,575.00

    Questions? Call us at (866) 812-6252

    The perfect ride-on solution for scrubbing and drying Ideally suited for daily indoor cleaning in mid-sized areas of railway stations, parking areas, shopping malls, exhibition centers, schools, hotels, public institutions and other commercial environments larger than 50,000sqft
    • 28 and 32 inch cleaning path
    • 31 US gallon solution and recovery tanks
    • 77 and 80 pounds of down pressure
    • One-touch scrubbing
    • Four solution flow rates
    • Easy recovery tank clean-out
    • Integrated squeegee hanging system
    • Side pocket for easy storage of paperwork
    • USB port for charging portable electronics
    • 5-year parts and 2-year labor warranty
  • Questions? Call us at (866) 812-6252

    The VIPER AS6690T/AS7690T/AS7190TO walk-behind scrubbers prioritize smart performance, simple design, and user-friendly operation for cleaning medium to large sized facilities. The AS6690T and AS7690T are both equipped with dual-brush decks for fast, effective cleaning, while the AS7190TO uses an orbital scrub deck for intensive multidirectional floorcare. Each is an ideal solution for facility-managers and contract cleaners who need impressive results in hard-floor areas, whether they’re performing routine cleaning, heavy-duty scrubbing, or floor finish removal (orbital version).
    • Eco mode greatly extends battery run time for greater productivity.
    • Silent mode allows for cleaning in noise sensitive areas and is ideal for daytime cleaning.
    • Finish removal mode icon enables chemical-free floor finish removal (AS7190TO only).
    • Traction drive for increased productivity while reducing operator fatigue.
    • Designed for quick and convenient tools free daily maintenance requirements.
  • Questions? Call us at (866) 812-6252

    The VIPER AS6690T/AS7690T/AS7190TO walk-behind scrubbers prioritize smart performance, simple design, and user-friendly operation for cleaning medium to large sized facilities. The AS6690T and AS7690T are both equipped with dual-brush decks for fast, effective cleaning, while the AS7190TO uses an orbital scrub deck for intensive multidirectional floorcare. Each is an ideal solution for facility-managers and contract cleaners who need impressive results in hard-floor areas, whether they’re performing routine cleaning, heavy-duty scrubbing, or floor finish removal (orbital version).
    • Eco mode greatly extends battery run time for greater productivity.
    • Silent mode allows for cleaning in noise sensitive areas and is ideal for daytime cleaning.
    • Finish removal mode icon enables chemical-free floor finish removal (AS7190TO only).
    • Traction drive for increased productivity while reducing operator fatigue.
    • Designed for quick and convenient tools free daily maintenance requirements.
  • Pad - Maroon - 14 - 10 - CS 56112733 for Advenger 2800ST and 3400ST and SC750 and SC800.
  • Velcro 2 Sided 14 56112746 for Advenger 2800ST and 3400ST and SC750 and SC800.
  • 15 Foot Hose and Coupler Kit 56384041 for Clean Track L24 and ES4000 Rider Extractor.
  • Squeegee Assembly 32 56315290 for Advance 34RST D, Advance Convertamatic 24D-C, Advance Adhancer W28-C and W32-C, AquaPLUS - AquaPLUS AXP - Adphibian, Convertamatic, Warrior ST and EcoFlex, and Nilfisk AX 651 Multi EDS. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Blade Kit-Squeegee Gum C 56315348 for Advance Adphibian Carpet Extractor.
  • Wand 56262209 for Klenzor 16, Clean Track 12, BextSpot, BEXT-100 100H 150H 120V, AquaClean 16ST 16XP 18FLX 18ST, Clean Track S16 and L18 Extractors, Clean Track L24, AquaPLUS - AquaPLUS AXP - Adphibian, Clean Track 12 Extractor, BEXT-100 100H 150H 300HV 120V, and Nilfisk AX410.
  • Chem Bottle Assembly - AXP 56315503 for Nilfisk BRX 700 and 700 EDS,Nilfisk AX 651 Multi EDS, Warrior ST and EcoFlex, Clean Track L24, Convertamatic, AquaPLUS - AquaPLUS AXP - Adphibian, AquaRide and AquaRide AXP, Advance Adhancer W28-C and W32-C, Advance Advenger 2400D, Advance Warrior 28D, Advance Convertamatic 24D-C, Advance Adhancer R28-C, and Advance Adgressor 2820D.
  • Brush Multi-Surface 56317047

    $194.59$210.68
    Genuine OEM Nilfisk-Advance or aftermarket version available. Brush Multi-Surface 56317047 for Nilfisk AX 651 Multi EDS, Clean Track L24, and AquaPLUS - AquaPLUS AXP - Adphibian.
  • Hose Assembly 56265368 for Nilfisk AX410, Clean Track L24, Clean Track 12 Extractor, AquaPLUS - AquaPLUS AXP - Adphibian, Clean Track S16 and L18 Extractors, AquaClean 16ST 16XP 18FLX 18ST, and Clean Track 12.
  • Upholstery Hand Tool 56220070 for ES300 ST, XP and ES400 XLP, Nilfisk AX410, Clean Track L24, Clean Track 16, 18 and 18 W-R, Clean Track 12 Extractor, AquaPLUS - AquaPLUS AXP - Adphibian, Clean Track S16 and L18 Extractors, AquaClean 16ST 16XP 18FLX 18ST, Clean Track 12, SelectSpot, Advance AquaSpot, and Klenzor 16.
  • Skirt - Pick Up 56390983 for Advance Advenger 2400D, Advance Hydro-Retriever 3200, and Advance Hydro-Retriever 2800.
  • Kit Linatex 32 Disk 56314918 for Advance Adgressor 2820D and Advance Advenger 2400D.
  • Blade Kit Disc Gum 32 56314914 for Advance Adgressor 2820D and Advance Advenger 2400D.
  • Kit on Board Charge Wet 120 Volt AC 56314753 for Advance Adgressor 2820D, Advance Adhancer R28-C, Advance Advenger 2400D, and Advance AquaRide SE.
  • Battery 6 Volt 310AH Wet 56391391 for Advance CMAX 28ST, Advance Adgressor 2820D, Advance 34RST D, Advance Adhancer R28-C, Advance Warrior 28D, Advance Advenger 2400D, Advance Convertamatic 285LX, Advance Convertamatic 265LX, Advance AquaRide SE, Advance 1300 B-ECO, Advance Adhancer W28-C and W32-C, Warrior ST and EcoFlex, Advance ConvertaMAX 20, Advance ConvertMAX 20-26 BA 550-650, Boost 32 Automatic Scrubber, Focus S28 S33 S38, Boost 28 Automatic Scrubber, Focus S28 L28 WB, Encore S30 and L30, Encore S28XP S33XP S38XP, Encore L26 Cylindrical, Encore S2426 L2426, Encore S30 and L30, and Encore S28-L28 S33-L33 S38-L38.
  • Kit Battery Watering 56314981 for SC900 ST Automatic Scrubber, Nilfisk UHR70-1700, Advance Adhancer W28-C and W32-C, Advance Advenger 2400D, Advance Warrior 28D, Advance Adhancer R28-C, Advance 34RST D, and Advance Adgressor 2820D.
  • Blade Deck Linatex 56410335 for Advance Hydro-Retriever 3800, Advance Advenger 2400D, and Advance Adgressor 2820D.
  • Blade Deck Gum 56407447 for Advance Hydro-Retriever 3800, Advance Hydro-Retriever 2800, Advance Hydro-Retriever 3200, Advance Advenger 2400D, and Advance Adgressor 2820D.
  • Chem Bottle Assy-Ecoflex 56601545 for Advenger 2800ST and 3400ST, ES4000 Rider Extractor, Warrior ST and EcoFlex, and SC750 and SC800.
  • Brush 80 Grit 32 - Black 56407477 for SC900 ST Automatic Scrubber, SC750 and SC800, Advance Hydro-Retriever 2800, Advance Hydro-Retriever 3200, Advance I-MAX 28C-32C, and Advance Adgressor 2820D. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Polypropylene 32 - Red 56407475 for Advance Adgressor 2820D, Advance I-MAX 28C-32C, Advance Hydro-Retriever 3200, Advance Hydro-Retriever 2800, SC750 and SC800, and SC900 ST Automatic Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Soft Nylon 32-Yellow 56407473 for Advance Adgressor 2820D, Advance I-MAX 28C-32C, Advance Hydro-Retriever 3200, Advance Hydro-Retriever 2800, SC750 and SC800,  and SC900 ST Automatic Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Back Up Alarm Option 0780-377 for Nilfisk CR 1500 Gas, LP, Diesel, 7760 Sweeper Scrubber, and 7765 7760 Sweeper Scrubber Options.
  • Rubber Squeegee Outer Linatex 7-77-00106 for Advance 7765 Rider Sweeper Scrubber.
  • Rubber Squeegee Inner 7-77-00107 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Daily

    $600

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $1650

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $4800

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.  
  • Genuine OEM Nilfisk-Advance or aftermarket version available. Main Broom - Fiber & Wire H/D 8-08-03198 for 7700 Sweeper Scrubber.
  • Sectional Brush Supergrit 7-08-03207. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Wire-Plastic Back 7-08-03193 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Sect-Plas-Amerfil 0.040 7-08-03196 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Black Nylon-Plastic Back 7-08-03194 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Assy Solid Back 7-08-03262-1 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Amergrit Plastic Back 7-08-03197 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush Soft Nylon Sectional 7-08-03248 for Advance 7765 Rider Sweeper Scrubber. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Brush 17.88 Clean Grit 7-08-03269 for Advance 7765. Genuine OEM Nilfisk-Advance or aftermarket version available.
  • Pad Holder -18" 2LUG 0772-074 for Advance 7765.
  • Genuine OEM Nilfisk Advance or aftermarket version available. Broom Curb Polfibre 2000 DCA 8-08-03107 for Advance 7765..
  • Filter Panel Poly High Flow 56382784 for Nilfisk CR 1500 Gas, LP, Diesel, and 7760 Sweeper Scrubber.
  • Battery 12 Volt 130AH Wet 56025782 for Advance SR1005B, Focus S17 S20 Rotary L17 Cyl., Encore S17 L17, Focus S17 and L17, and Focus II, S20, L20, Boost 20.
  • Counter Hour 24 Volt Kit 9096951000 for Razor 20, Advance Adfinity 20D AXP, Advance Adfinity 17ST, Focus II, S20, L20, Boost 20, SW900 Sweeper
  • Replacement hose filling for Adfinity 17ST-20ST-X20R ecoflex, SC400 Scrubber, SC450 Automatic Scrubber, SC450 Automatic Scrubber.
  • Choose between a Genuine OEM Advance Skirt Kit or compatible aftermarket equivalent. If you need assistance determining your machine model or the correct part number, please call us at 1 (800) 686-1717 and we will happily assist you. Image is for demonstration purposes only. Actual product appearance may vary. Compatible with the following models: Advance Terra 28B Clarke BSW28
  • Daily

    $95

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $300

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $850

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
     
  • Daily

    $95

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $300

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $850

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
     
  • Questions? Call us at (866) 812-6252

    Autonomous floor scrubber for medium to large sized environments. Allows staff to focus on other tasks while the Liberty SC50 scrubs for 6 hours on a single charge. Meet Nilfisk Liberty SC50 autonomous scrubber-dryer. After years of developing, testing, refining, live beta testing and more refining, it’s ready for the biggest and toughest jobs you can throw at it. In airports, schools, gymnasiums, ballrooms and more, Nilfisk Liberty will get the dirtiest floors clean, any time of day, with no one watching over it. Clean consistently every time. Nilfisk Liberty SC50 is precise, meticulous, and easy to use. It gets into those nooks and crannies you might otherwise miss, and it does it every single time. In fact, operators – and most autonomous cleaning machines – typically miss 15% of a space. But Nilfisk Liberty SC50’s unique technology lets you map out a route that delivers between 98% and 99.5% coverage. You can do it with no help from us or anyone else. And as soon as Nilfisk Liberty SC50 has cleaned an area once, it precisely retraces the same path again, and again, and again. Clean more, faster. How much more would you get done if no one had to spend time guiding a scrubber-dryer over all that floor space? Nilfisk Liberty SC50 frees up your staff to do those other important jobs that call for a human touch, while it cleans autonomously for up to six hours on a single charge. It also automatically maps out the most efficient cleaning paths and retraces them every time. So you can clean more space in less time at a lower cost every single day. Plus, you’ll get a text when it’s time for Nilfisk Liberty SC50 to move on to the next task, and you won’t have to think about unnecessary down time either. Nilfisk Liberty SC50 is a fast learner. When it needs to be taught new tricks, you can teach it yourself. You’ll never have to request a service visit just because you find yourself wanting to clean new spaces. Or when circumstances change for any reason – for a while or for good. Just hop on your Nilfisk Liberty SC50, push the button to put it in mapping mode, and you’ll soon be ready to take on something new.
    • Reliable and Safe: The Liberty SC50 is the only autonomous floor scrubber on the market compliant with CSA/ANSI 336, an OSHA recognized autonomous floorcare safety standard.
    • Size and Run-Time: The agile design allows the machine to react to changes in the environment and maintain autonomous operation without operator intervention.
    • Simplicity:  We added 3 buttons for autonomy.  Record. Play. Stop.  This machine is built for a scrubber operator, not a computer programmer.
    • Fill-in Mode:  The operator drives around the site to-be cleaned once, and the SC50 calculates the most efficient path to clean the interior of that space, avoiding obstacles along the way.  This revolutionary cleaning method is a Nilfisk exclusive.
  • A non-acid cleaner and disinfectant for use in a wide range of facilities: schools, hospitals, nursing homes; anywhere where infection prevention is of prime importance

    DISINFECTION, DEODORIZING AND CLEANING Remove gross filth or heavy soil prior to application of the product. Hold container six to eight inches from surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and the surface to remain wet for 3 minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1 minute and for HBV and HCV 5 minutes). No scrubbing is necessary. Wipe off with a clean cloth, mop or sponge. The product will not leave grit or soap scum.

    One-step cleaning and disinfection of toilet bowls and urinals: Remove water from bowl by forcing water over trap with a swab mop applicator. Press swab mop against side of the bowl to remove excess water from applicator. Apply 1 to 2 ounces of this product evenly, allowing sufficient time for product to cover entire surface of bowl for maximum cleaning. Swab bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 3 minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1 minute and for HBV and HCV 5 minutes) and flush.

  • Questions? Call us at (866) 812-6252

    Manual Sweeping, Maximum Filtration.

    Sweep up any surface with the Cimex Filtration Sweeper. This walk-behind machine collects debris in a single, efficient sequence of dust-free multi-layer filtering and aggressive three-brush formation. Great for industrial plants and commercial properties, the Cimex Filtration Sweeper will maintain the safety and presentation of your facility. At five times the speed of traditional brooming, hard floors become efficiently cleaner in less time.
  • Questions? Call us at (866) 812-6252

    Manual Sweeping, Wider Coverage.

    Approach a variety of surfaces with the Cimex Wide Sweeper. This walk-behind machine collects debris in a single, expanded aggressive three-brush formation. Great for larger industrial plants and commercial properties, the Cimex Wide Sweeper will ensure the safety and presentation of your facility. At five times the speed of traditional brooming, hard floors become efficiently cleaner in less time
  • Daily

    $45

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $135

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $400

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus, Toledo Ohio & Rockledge Florida Locations. The Rockledge Florida branch serves the Greater Orlando area. Limited delivery options are available. Please contact us for more information.
  • Daily

    $45

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $135

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $400

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus & Toledo Ohio Locations. Limited delivery options are available. Please contact us for more information.
  • Daily

    $250

    (8 Hours)

    Rent this machine for 8 hours per day.

    Weekly

    $675

    (40 Hours)

    Rent this machine for 40 hours per week.

    Monthly

    $1975

    (120 Hours)

    Rent this machine for 120 hours per month.

    6 Months

    Call

    (6 Months)

    Rent this machine for 6 full months.

    12 Months

    Call

    (1 Year)

    Rent this machine for 1 full year.

    24+ Months

    Call

    (2 or More Years)

    Rent this machine for 2 full years or more.
    Unit is available at our Tallmadge, Cleveland, Columbus, Toledo Ohio & Rockledge Florida Locations. The Rockledge Florida branch serves the Greater Orlando area. Limited delivery options are available. Please contact us for more information.
  • Questions? Call us at (866) 812-6252

    HIGH PRODUCTION DISINFECTANT APPLICATION

    Regular application of cleaning and disinfectant solutions is the key to infection control.  Titan airless sprayers maximize application speed whether you are spraying out a small multi-room dwelling, police station or an entire office building.
    • Airless sprayers provide high production rates to complete disinfectant jobs faster and with better coverage.
    • HEA® (High Efficiency Airless®) spray technology delivers the industry best wetting with a large fan pattern with bigger droplets set anywhere from 500 - 1200 PSI.
    • Titan has the right sprayer for the job with flow rates from 0.47 GPM to 1.25 GPM.
    • Delivers maximum ROI with high production rates, inexpensive equipment and ease of maintenance.
    • Proven to spray select EPA “List N” solutions for use against the novel coronavirus which causes COVID-19.
  • Questions? Call us at (866) 812-6252

    HIGH PRODUCTION DISINFECTANT APPLICATION

    Regular application of cleaning and disinfectant solutions is the key to infection control.  Titan airless sprayers maximize application speed whether you are spraying out a small multi-room dwelling, police station or an entire office building.
    • Airless sprayers provide high production rates to complete disinfectant jobs faster and with better coverage.
    • HEA® (High Efficiency Airless®) spray technology delivers the industry best wetting with a large fan pattern with bigger droplets set anywhere from 500 - 1200 PSI.
    • Titan has the right sprayer for the job with flow rates from 0.47 GPM to 1.25 GPM.
    • Delivers maximum ROI with high production rates, inexpensive equipment and ease of maintenance.
    • Proven to spray select EPA “List N” solutions for use against the novel coronavirus which causes COVID-19.
  • Questions? Call us at (866) 812-6252

    Sanitizing and Disinfecting Floor surfaces is more important than ever.

    Make Unlimited Amounts Of Oxidizing Solution Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand. Features • Antimicrobial Tank • Remote Tank and Spray Wand • Non Marking Grey Tires • Onboard ZerO3® • Urethane Squeegee Blades • 0.2 Micron Vac Filter
  • Questions? Call us at (866) 812-6252

    Sanitizing and Disinfecting Floor surfaces is more important than ever.

    Make Unlimited Amounts Of Oxidizing Solution Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand. Features • Antimicrobial Tank • Remote Tank and Spray Wand • Non Marking Grey Tires • Onboard ZerO3® • Urethane Squeegee Blades • 0.2 Micron Vac Filter
  • Questions? Call us at (866) 812-6252

    Sanitizing and Disinfecting Floor surfaces is more important than ever.

    Make Unlimited Amounts Of Oxidizing Solution Keep your workplace safe from viruses, microbes and bacteria with the new Factory Cat line of Sanitation Machines. Ordinary tap water in the solution tank is transformed into aqueous ozone, which like chlorine is a powerful oxidizer. The Spray Wand Tank installed on the front is dedicated to approved cleaners, which can be applied to surfaces with the 100-psi Handheld Spray Wand. Features • Antimicrobial Tank • Remote Tank and Spray Wand • Non Marking Grey Tires • Onboard ZerO3® • Urethane Squeegee Blades • 0.2 Micron Vac Filter
  • Questions? Call us at (866) 812-6252

    Compact and dependable. The DG Shark Series are tough gasoline-powered direct-drive cold water machines that deliver cleaning power of up to 4000 PSI. Built on compact sturdy steel frames, each unit features a dependable industrial-grade Honda engine, crankcase pump, hose/gun rack and tubed pneumatic tires. Features Steel frame with powder coat finish Honda GX engine Industrial direct-drive crankcase pump with U-Seal technology  
  • Questions? Call us at (866) 812-6252

    Easily converts from cart to skid. Corrosion-resistant and light-weight, Mako Shark Series HD aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Honda powered pressure washers offer a bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Honda GX engine Belt or direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated. Weldless, corrosion resistant aluminum frame Modular design - converts easily from cart to skid Stainless steel nozzles U-Seal technology  
  • Questions? Call us at (866) 812-6252

    Cleaning versatility and durability. Corrosion-resistant and light-weight, Kärcher’s direct drive, HD Classic aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Kärcher powered pressure washers offer a 3-year engine warranty, bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Kärcher engine with 3-year warranty Direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated Aluminum frame - modular design - converts easily from cart to skid  
  • Questions? Call us at (866) 812-6252

    Cleaning versatility and durability. Corrosion-resistant and light-weight, Kärcher’s direct drive, HD Classic aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Kärcher powered pressure washers offer a 3-year engine warranty, bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Kärcher engine with 3-year warranty Direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated Aluminum frame - modular design - converts easily from cart to skid  
  • Questions? Call us at (866) 812-6252

    Cleaning versatility and durability. Corrosion-resistant and light-weight, Kärcher’s direct drive, HD Classic aluminum pressure washers can be utilized as a cart or a skid for maximum cleaning versatility and durability. These reliable Kärcher powered pressure washers offer a 3-year engine warranty, bypass loop for additional pump protection, 7-year pump warranty and flat-free tires. Features Reliable Kärcher engine with 3-year warranty Direct drive models Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated Aluminum frame - modular design - converts easily from cart to skid  
  • Questions? Call us at (866) 812-6252

    Durable and dependable. This industrial hand held unit is significantly more rugged than typical consumer substitutes and are built with durable steel frames. This hand-held model comes with a dependable crankcase pump, high pressure hose and a stainless steel wand. Features Durable steel frame Crankcase pump Portable, easy to transport Certified to UL safety standard  
  • Questions? Call us at (866) 812-6252

    One-step solution. The Jarvis Series is a complete solution for quick, streak-free cleaning of businesses' entrances, parking lots, tennis courts, pool decks and sidewalks. This easy to use cold water surface cleaner pressure washer is an all-in-one unit with the pump and engine attached to the surface cleaner, and it is designed to attack the superficial dirt sweeping alone does not get. The Jarvis series surface cleaner pressure washer is perfect for all operators - simple on / off operation, flat free tires and a folding handle for easy transport and storage. 21" corrosion-resistant stainless steel surface cleaner housing and a professional grade swivel design for extended, effortless use Reliable Honda GX engine with three-year warranty Flat free tires Folding handle for easy storage and transport Simple on / off operation EASY!Force gun with cruise control like technology - uses its own recoil force to hold the trigger down - so, no more sore hands after hours of use
  • Questions? Call us at (866) 812-6252

    The SPE range of Magnetic Floor Sweepers has been designed to collect up ferrous and other metallic particles remaining on floor surfaces after blasting has taken place.
    • Collects ferrous and metallic debris from floor after blasting
    • Simple operation
    • 50 year magnet life
    The simply operated release mechanism enables easy depositing of debris after collection. The permanent magnet will retain its power for 50 years and requires no maintenance. The height is adjustable to cope with large waste and uneven surfaces. The standard sweepers range in size from 310mm to 915mm wide but alternative towable and forklift mounted models are available.
  • Questions? Call us at (866) 812-6252

    SPE 20DC Dust Collector

    Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.
  • Questions? Call us at (866) 812-6252

    SPE 16DC Dust Collector

    Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.
  • Questions? Call us at (866) 812-6252

    SPE 12DC Dust Collector

    Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working.
  • Questions? Call us at (866) 812-6252

    SPE DFG 500 Floor Grinder

    Very little usage on these demo units. Regular price is $14,000. 2 units available. Free shipping to a commercial loading dock.
  • Questions? Call us at (866) 812-6252

    Planing / Scarifying made easy...

    Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
    • 275mm (10.8″) working width
    • 400v 3-phase, gasolene/petrol versions
    • Rigid, compact design
    • 50mm dust extraction port
    • Dust free when operated with SPE 316 vacuum
    • Six flail shafts, heavy duty T.C.T. cutters
    • Forward mounted cutter drum for perfect balance
    • Side plate access for quick and easy cutter drum removal
    • Handle height fully adjustable for operational control
    • Monocoque construction is rigid, strong and accurate
    • Accurate depth control for precision surface texture and maximum cutter life
  • Questions? Call us at (866) 812-6252

    Planing / Scarifying made easy...

    Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
    • 275mm (10.8″) working width
    • 400v 3-phase, gasolene/petrol versions
    • Rigid, compact design
    • 50mm dust extraction port
    • Dust free when operated with SPE 316 vacuum
    • Six flail shafts, heavy duty T.C.T. cutters
    • Forward mounted cutter drum for perfect balance
    • Side plate access for quick and easy cutter drum removal
    • Handle height fully adjustable for operational control
    • Monocoque construction is rigid, strong and accurate
    • Accurate depth control for precision surface texture and maximum cutter life
  • Questions? Call us at (866) 812-6252

    The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
    • Rigid, compact design
    • Quick Lift – Pulls Cutters In/Out of Cut
    • 50mm dust extraction port Dust free when operated with a suitable vacuum
    • Large diameter wheels for excellent mobility and stability
    • Welded construction is rigid, strong and lower control
    • Fine Adjust- Screw type raise and lower control
    • Firm engine mounting plate
    • Front wheels protected from debris
    • Height adjustment at the handle
  • Questions? Call us at (866) 812-6252

    The BEF200N is the newest addition to the BEF scarifier line that has been proven by contractors all around the world for over 30 years. This scarifier is perfect for general surface prep and coating removal on small – medium size jobs. Some features include:
    • Rigid, compact design
    • Quick Lift – Pulls Cutters In/Out of Cut
    • 50mm dust extraction port Dust free when operated with a suitable vacuum
    • Large diameter wheels for excellent mobility and stability
    • Welded construction is rigid, strong and lower control
    • Fine Adjust- Screw type raise and lower control
    • Firm engine mounting plate
    • Front wheels protected from debris
    • Height adjustment at the handle
  • Questions? Call us at (866) 812-6252

    For Sale The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate. RELIABLE PERFORMANCE • Powerful 18 HP 603cc propane engine with EPSTM technology • Counter rotating brushes reduce stripper splash • Ball throttle with electric clutch ensure smooth start up DESIGNED FOR SAFETY • Operator Presence automatic shutoff system • SAFR Technology keeps emissions low even when air filter is dirty • Muffler system exceeds EPA and CARB minimum requirements COST EFFECTIVE • 5 Times LONGER oil change interval than other machines in its class • Uses 34% LESS fuel than other machines in its class • Low profile deck for edge-to-edge operation • Easy pad changes with Rok-BakTM engineering • Easy access battery service and oil changes
  • Questions? Call us at (866) 812-6252

    For Sale The 440ST is a powerful, propane powered floor stripping machine. As part of the Ultimate Stripping System – which includes the HydroStar™ applicator and StripVac™ recovery system – the 440ST uses two counter rotating drivers that effectively remove floor finishes faster than any other machine on the market. The Rok-bak™ feature allows operators to quickly change pads and brushes while it sleek, ergonomic design make the machine simple and easy to operate. RELIABLE PERFORMANCE • Powerful 18 HP 603cc propane engine with EPSTM technology • Counter rotating brushes reduce stripper splash • Ball throttle with electric clutch ensure smooth start up DESIGNED FOR SAFETY • Operator Presence automatic shutoff system • SAFR Technology keeps emissions low even when air filter is dirty • Muffler system exceeds EPA and CARB minimum requirements COST EFFECTIVE • 5 Times LONGER oil change interval than other machines in its class • Uses 34% LESS fuel than other machines in its class • Low profile deck for edge-to-edge operation • Easy pad changes with Rok-BakTM engineering • Easy access battery service and oil changes
  • Questions? Call us at (866) 812-6252

    A new addition to our floor stripping system, the 250ST is a high speed orbital machine designed for the toughest applications. The 250ST can be used for chemical free deep scrub applications and in conjunction with Pioneer Eclipse floor strippers for stripping jobs. A 2.5 gallon (9.5 liter) solution tank comes standard on this machine. VERSATILE • Strip, deep scrub, and scrub • 2.5 gal. (9,5 liter) solution tank PRODUCTIVE • 120V 1 HP totally enclosed motor • 12” x 18” (30,5 cm x 45,8 cm) pad size • 3,600orbits per minute • 50 foot (15 m) UL listed 14/3 STW-A power cord with hospital grade plug USER FRIENDLY OPERATION • Adjustable, anti-fatigue soft-touch handle • Dual lever on/off safety switch for left or right hand operation • Large, non-marking, transport wheels
  • Questions? Call us at (866) 812-6252

    The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces. Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface. Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class. The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.  
  • Questions? Call us at (866) 812-6252

    The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors. Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class. The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
  • Questions? Call us at (866) 812-6252

    For Sale The 225GP utilizes a triple planetary gear drive powered by a 1.5 HP (1,1 kW) DC rectified motor with quick disconnect for easy troubleshooting and service. For added safety, the machine is equipped with a 40’ power cord and GFCI. The enclosed 2.5 gallon (9,5 liter) solution tank does not spill water while changing attachments, and the integral splash/dust skirt contains splash and assists in dust collection. A Versatile Machine for polishing, stripping, sanding, and coating removal. RELIABLE PERFORMANCE • 1.5 HP, 2 speed, high torque motor • Driver speed 175 or 300 rpm • Strong triple planetary gearbox • Rugged, all metal construction • Non-conductive, commercial grade switch housing SUPERIOR PRODUCTIVITY • 17” machine polishes 6,000 sq.ft. per hour (557 m2/hr) • 2.5 gal. (9,5 liter) no-spill solution tank • Dust containment port for dry applications • Splash/dust skirt for wet applications • HydraShine diamond driver uses a passive planetary system for a superior polish
  • Questions? Call us at (866) 812-6252

    For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The FM Floor Maintainer is a corded floor care machine available in two widths, 17 inches (43 cm) and 20 inches (51 cm). Dual planetary drive system uses precision needle bearing and a rugged 1 hp motor with 1.25 service factor provides extra power for grinding, sanding and carpet cleaning as well as polishing and scrubbing. Available with optional four gallon solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder. The machine comes equipped with a padholder and is available with an optional solution tank.
  • Questions? Call us at (866) 812-6252

      For Sale, The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder. The machine comes equipped with a padholder and is available with an optional solution tank.
  • Questions? Call us at (866) 812-6252

    For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 440BU is a propane powered, ultra-high speed burnisher manufactured with premium features to satisfy the needs of floor care professionals around the world. Replacing the popular SpeedStar™, the 440BU is available in three different widths – 21, 24, and 28 inches (53, 61, and 71 cm, respectively). Each model comes standard with a 12 volt battery start, catalytic muffler, handle bail clutch, wrap around steel skirt, CentriVac™ dust control system and SafeSense™ emissions monitoring system. Powered by an 18-HP, 603 cc Kawasaki engine, the 440BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    For Sale, The 420BU is a propane powered, ultra-high speed burnisher that gives floor care professionals the options they want to customize a machine to their needs. Based on the decades popular Mean Machine™, the 420BU is available in four different widths – 21, 24, 28, & 40 inches (53, 61, 71, and 102 cm, respectively). Each model comes standard with a 12-volt on board electric starter and clutch. A passive vacuum and EcoSense emissions monitoring system are optional at extra charge (active vacuum is standard on the 40″ model). Powered by an 18-HP, 603 cc Kawasaki engine, the 420BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    The 400BU is an ultra-high speed propane burnisher that gives floor care professionals the performance features of higher priced units in one affordable package. Available in two widths, the 400BU uses 34 percent less fuel and requires 40 percent fewer oil changes than other machines in its class.
  • Questions? Call us at (866) 812-6252

    The 300BU is a battery operated Ultra-High Speed (“UHS”) burnisher that rapidly produces high levels of gloss on VCT, polished concrete and other hard floor surfaces. The 300BU features SteadyOne™ pad control technology that dramatically improves the performance and life span of burnishing pads while producing excellent single-pass results. This powerful burnisher is available in 20″, 24″, 27″, 28″, and 30″ models. The 300BU comes with a dust control filter system for clean, quiet and efficient burnishing. Powered by three 12-volt 228 AH batteries, the 300BU can burnish over 26,000 square feet per hour (2400 square meters) and producing only 67 decibels of soft noise. Clean, safe and effective, the 300BU is a burnisher you can count on to maintain floors at any hour in any facility. Do you ever get inconsistent results with your battery burnisher? It may be because your burnisher doesn’t have the ability to adjust to changing conditions. The 300BU does. With Steadyone Technology built into every 300BU, the burnishing head automatically adjusts to changing floor conditions and changing pad conditions, producing consistent results every time. Exclusive to the 300BU, this “smart” adjustment produces great results – fast – in just a single pass. SteadyOne™ uses advanced fluid drive technology to maintain constant pad pressure and produce more consistent results. Unlike other machines using spring mechanisms that vary when a metal coil compresses or extends, SteadyOne™ automatically adjusts the deck as the pad wears to apply the same pad pressure throughout the burnishing operation. Floor care professionals can now get the same one-pass results today … and tomorrow.
  • Questions? Call us at (866) 812-6252

    The 225BU Electric Floor Burnisher offers:
      • Anti-fatigue soft touch handle design
      • Compact shroud to allow burnishing next to wall
      • Non-conductive, commercial grade switch housing
      • Toggle flip adjustable handle for easy operation
      • Full pad-to-floor contact with no compensating castor
      • Flexible pad driver to reduce floor “burning”
      • Dual lever on/off safety switch for left or right hand operation
      • 5” (13 cm) non-marking, self-lubricating transport wheels
      • 50 ft. (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
      • No slip, micro-V belt drive transmission
      • 1.5 HP D.C. rectified UL recognized motor
  • Questions? Call us at (866) 812-6252

    The 225BU Electric Floor Burnisher offers:
      • Anti-fatigue soft touch handle design
      • Compact shroud to allow burnishing next to wall
      • Non-conductive, commercial grade switch housing
      • Toggle flip adjustable handle for easy operation
      • Full pad-to-floor contact with no compensating castor
      • Flexible pad driver to reduce floor “burning”
      • Dual lever on/off safety switch for left or right hand operation
      • 5” (13 cm) non-marking, self-lubricating transport wheels
      • 50 ft. (15 m) UL listed 14/3 STW-A power cord with hospital grade plug
      • No slip, micro-V belt drive transmission
      • 1.5 HP D.C. rectified UL recognized motor
  • Questions? Call us at (866) 812-6252

    Give your hands and back a break and let the Power Hammer Trolley make you faster, more efficient, and productive. This machine works as a floor stripper and scraper on concrete and wood surfaces. Great for removal of epoxy, ceramic tile, vinyl, VCT, cork, adhesives, mastic, and more. The Power Hammer Trolley is perfect for rock breaking and block demolition. TROLLEY: fits Hilti TE1000 and Hilti TE1500 and Bosch 11335K
  • Questions? Call us at (866) 812-6252

    The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing. SAFETY
    • Dual rear vacuum ports
    • Removable handle and weights for easy transport
    COMFORT
    • Three-part adjustable angle handle
    PERFORMANCE
    • Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
    • Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
    • Variable speed control
    • Flip-style weights for added or decreased head pressure
    • 18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
    • Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
    • Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
  • Questions? Call us at (866) 812-6252

    This machine offers you a way to prep and polish effectively into corners. This tool will work into most areas that handheld grinders do not, and it will eliminate the need to paint a border around polished rooms. Grind and polish corners, under cabinets and stairs, under railings, and around door frames. SAFETY
    • Loop handle enables precision handling
    PERFORMANCE
    • Accommodates brazed diamonds and polishing pads, from 16 to 3000 grit; supports corner work in partnership with all other National surface preparation tools
    • Variable-speed, right-angle motor powers numerous tooling options with an oscillating motion
  • Questions? Call us at (866) 812-6252

    Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal SAFETY
    • Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
    • Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud
    COMFORT
    • Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue
    PERFORMANCE
    • Accommodates multiple styles of diamond turbo cup wheels
  • Questions? Call us at (866) 812-6252

    Available in 5-inch and 7-inch models, these electric, right-angle grinders are handheld and can be used for a variety of concrete floor preparation applications, including concrete cleaning and leveling as well as mastic, urethane, epoxy, and coatings removal. SAFETY
    • Durable convertible polyurethane dust shroud enables detailed, nearly dustless edge grinding
    • Works with dust collectors; attach using the 2-inch inlet port connector located on the convertible dust shroud
    COMFORT
    • Loop handle on 3420 and 3432 creates superior control, results in fewer swirl marks, and lessens operator fatigue
    PERFORMANCE
    • Accommodates multiple styles of diamond turbo cup wheels
  • Questions? Call us at (866) 812-6252

    Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency. SAFETY
    • Quick-release levers allow the machine to be separated into two pieces for easy transport
    • LED light illuminates the surface directly behind the machine
    COMFORT
    • Fully adjustable handle accommodates a range of operating positions
    PERFORMANCE
    • Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
    • Removable weights give the operator freedom to increase or decrease head pressure when grinding
    • 16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
    • Dual-speed motor increases the versatility of this machine; operating at high or low speed
  • Questions? Call us at (866) 812-6252

    The new DL2000 is precisely engineered, contractor tested, and designed with the highest control calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. The dust collector exceeds HEPA standards and is equipped with a Longopac bagging system.
    • DL2000 Dust Collector, 115 V
    SAFETY
    • Individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    • Heavy-duty, anti-static collection hose provides durability and safety
    PERFORMANCE
    • Primary filter
    • State-of-the-art telescoping side arms for a highly portable machine that can be packed away easily for storage, or expanded for use
  • Questions? Call us at (866) 812-6252

    The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
    • DL3000 Dust Collector, 230 V
    SAFETY
    • Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
    PERFORMANCE
    • Primary filter
    • Heavy-duty, anti-static collection hose provides durability and safety
  • Questions? Call us at (866) 812-6252

    The GP3000 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor. The 28-inch cleaning path and increased grinding head pressure make this an ideal machine for commercial and industrial projects.
    • Adjustable shroud incorporates a brush for a 360-degree air intake
    • Rear spring suspension allows for a more even prep over uneven surfaces
    • Soft, regular, or hard couplers available for varying floor conditions
    • New stainless steel, 20-gallon water tank
    • Control box includes variable-speed soft start, forward and reverse functionality
  • Questions? Call us at (866) 812-6252

    The new and improved GP700 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor.
    • Adjustable shroud incorporates a brush for a 360-degree air intake
    • Rear spring suspension allows for a more even prep over uneven surfaces
    • Forward/rear locking pitch-adjustable axle that allows the operator to change the angle of the head pressure from the front to the back to compensate for inclines/declines on uneven surfaces
    • Soft, regular, or hard couplers available for varying floor conditions
    • New stainless steel, 7-gallon water tank
    • Control box includes variable-speed soft start, forward and reverse functionality
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
    • 21-inch nonmarking tires
    • Compact design fits through standard door frames and elevator doors
    • Hydraulic brake system automatically engages when the machine is in the off position
    • Front caster wheels allow increased maneuverability in tight spaces position
    • Improved exhaust system meets federal OSHA regulations
    • LED light for increased visibility on the jobsite
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
    • Nonmarking tires
    • AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
    • Compact design fits through standard door frames and elevator doors
    • Heavy-duty 3000 PSI wheel motors
    • Front caster wheels allow increased maneuverability in tight spaces
    • LED light for increased visibility on the jobsite
  • National 5700 Ride-On Scraper

    $43,736.56$50,132.18

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions. 5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated. 5700HS: Designed to cover more space in less time; specifications made to order. Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
    • Quick-change swivel head blade holder
    • Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
    • Nonmarking tires
    • Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
    • Compact design fits through standard door frames and elevators doors
    • Front caster wheels allow increased maneuverability in tight spaces
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces. Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
    • Variable speed, 12 to 50 feet per minute
    • Self-contained, limited-maintenance hydraulic fluid
    • Removable 49-pound saddle weight helps increase or decrease down pressure and traction
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more. A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.
    • Angle-adjustment wheel changes pitch of the blade in seconds
    • 1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
    • Removable front weight provides additional down pressure and facilitates easy loading/unloading
    • Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • Questions? Call us at (866) 812-6252

    1 Available  Please contact us for delivery and lead times Click here for the full National Flooring Equipment catalogue The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
    • Self-contained, limited-maintenance hydraulic fluid
    • Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Design incorporates nine isolators for the toughest jobs
    • Patented isolator overtravel design ensures safety on the toughest jobs
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
    • Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Transport-wheel rack hanger on back of handle
    • Adjustable wheel scrapers prevent material buildup during operation
    • Patented isolator overtravel design ensures safety on the toughest jobs
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs. This is a special order machine. Please contact us for more information and lead times. Additional carts, power packs and chargers are available for purchase if you require longer run times.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
    • Quick-change swivel head
    • Extra weight compartments
    • Larger/deepened forklift pockets
    • Nonmarking tires
    • Trailer hitch
    • Flip-up back lid for quick and easy battery changing
    • Front debris deflector protects machine from loose material
    • Front caster wheels allow increased maneuverability in tight spaces
  • National 5625 Ride-On Scraper

    $38,028.13$41,550.60

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
    • Larger/deepened forklift pockets
    • Nonmarking tires
    • Compact design fits through standard door frames and elevator doors
    • Improved exhaust system meets federal OSHA regulations
    • Front caster wheels allow increased maneuverability in tight spaces
    • 12-volt LED light for increased visibility on the jobsite
  • Edco 20″ Self-Propelled Saw

    $10,035.45$12,971.58

    Questions? Call us at (866) 812-6252

    Model: SS-20
    • Stressproof, precision-machined, 1 3/4″ steel arbor shaft
    • Includes electric start, 12-volt battery and heavy-duty 15-amp charging system
    • Swing-away, rear 3-gallon fuel tank
    • Screw-type depth control w/lock guarantees accurate cutting
  • Questions? Call us at (866) 812-6252

    Model: DS-20 BLADE NOT INCLUDED
    • 20″ Blade Capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Heavy-Duty Anti-Vibration engine mount!
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail for easy loading and unloading
    • 13 HP gasoline engine or 7.5 HP electric options
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • Solid-Steel lifting handles
    • High quality molded rubber wheels
  • Questions? Call us at (866) 812-6252

    Model: KL-18 BLADE NOT INCLUDED
    • 18″ blade capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail (optional)
    • 13 HP gasoline engine
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • High quality molded rubber wheels
  • Questions? Call us at (866) 812-6252

    MODEL: KL-14
    • 14” Blade Capacity
    • Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
    • Heavy-Duty Box Frame Construction
    • Laser Fabricated Thick Steel Material
    • Easy-Use Hand Wheel Depth Control
    • Misting system for wet cutting
    • Thick steel blade guard for added safety
    • Easy access belts and bearings for fast maintenance
    • Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint
  • Questions? Call us at (866) 812-6252

    MODEL: TLR-7

    Remove traffic lines from asphalt – and get the job done quickly!

    EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones. Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
    • 7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
  • Questions? Call us at (866) 812-6252

    MODEL: CD-3
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 100 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Three, 5 Point Carbide Bits included
  • Questions? Call us at (866) 812-6252

    MODEL: CD-5
    • Removes up to 250 sq.ft. per hour at Depth Per Pass of 1/4″
    • Delivers 1,200 hits per minute for fast surface removal
    • Requires only 160 CFM at 100 PSI Heavy-duty 1/4″ steel frame
    • 2″ Vacuum Port for dust-free operation
    • Automatic in-line lubricator (oiler)
    • WHIPCHEK Cable assures safe air hose hookup
    • Five, 5 Point Carbide Bits included
  • Questions? Call us at (866) 812-6252

    MODELS: CPU-10FC-G, CPU-10-FC-E
    • 10″ working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8″
    • Adjustable depth control up to 3/16″ working depth per pass
    • Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
    • Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
    • Includes lifting bail, oil alert and hour meter
    • Optional outrigger axle enables the CPU-10(FC) to follow slab contours closely when working on uneven surfaces
    • Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes
  • Questions? Call us at (866) 812-6252

    Models: CPM-10G, CPM-10E
    • 10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
    • 1/4” steel frame
    • Heavy-duty, oversized bearings
    • Weighs 299 lbs. with cutters
    • Tethered emergency stop switch
    • Larger 6” wheels in the rear for easy handling
    • Gasoline or Electric models available
    • Vacuum port standard for dust-free cutting
    • 6-Shaft and 8-Shaft easy change, side loading drums available
    • Tungsten carbide or steel cutters available
  • Questions? Call us at (866) 812-6252

    TR Rider Industrial Floor Sweeper

    Factory Cat's Floor Sweepers sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.

    The Factory Cat model TR's design was built from the success of our Model 34 walk behind sweeper. The TR's side brooms sweep up dirt in the corners while a huge tubular sweeping broom under the machine sweeps up the dirt and debris from the floor and packs it into the steel hopper. Meanwhile, the second stage vacuums up the dust and traps it in a polypropylene felt "baghouse" filter. Factory Cat's Industrial floor sweepers can pick up whole bags of cement at a time without leaving a trace of dust behind.

    TR Rider Floor Sweeper Specs:

    • Dimensions (L x W x H): 64" x 37" x 55"
    • Weight: 1,350 lbs.
    • Main Broom (L x Dia): 32" x 10"
    • Side Broom Size: 17" (x2)
    • Cleaning Width: 46"
    • Cleaning Rate (sq. ft/hr): 60,500
  • Questions? Call us at (866) 812-6252

    34 and 34HD Industrial Walk Behind Sweeper

    Factory Cat's Floor Sweepers are built to sweep factories: dirt, dust, metal shavings, foundry sand, bolts, paper, wood, whatever there is. Factory Cat's are compact, not light-duty.

    The Factory Cat model 34 Walk Behind Sweeper is the machine that built our company. A Industrial Sweeper famous for its ability to survive decades in the harshest applications: including mines, brick manufacturing and rugged steel mills. Designed almost 25 years ago, this floor sweeper can sweep through thick saw dust found in furniture manufacturing plants and the dust in paper mills. Bulk powder packaging clients with concrete powder or copier toner like its sweeping power without it blowing dust everywhere. The battery powers the sweeper for over 4 hours on a single charge and the sweeping broom is self adjusting for wear.

    34 Walk Behind Sweeper Specs:

    • Dimensions (L x W x H): 58" x 31" x 38"
    • Weight: 450 lbs.
    • Main Broom (L x Dia): 26" x 10"
    • Side Broom Size: 17"
    • Cleaning Width: 34"
    • Cleaning Rate (sq. ft/hr): 30,000
  • Questions? Call us at (866) 812-6252

    Factory Cat's GTX Rider Floor Scrubber Dryer is known for its simple design and durable construction, offering unmatched value for the customer. The GTX Floor Scrubber Dryer comes equipped with a powerful front-wheel drive for climbing ramps and max operator ease.

    While keeping with the constant durability that Factory Cat machines have to offer, your operators will find the GTX Floor Scrubber Dryer easy to maneuver and simple to service. The deck is protected by heavy duty metal shrouds or large polyurethane rollers to keep the unit from marking walls and your investment safe.

    The GTX Scrubbers are available with Disk and Cylindrical scrub heads.

Go to Top