-
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.Features & Benefits • Our smallest, most compact inline scaler • Powerful and light-weight • All steel components offer durability and long-life • 3800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds12NS100 -Needle Scalers • Equipped with 12pcs -3mm x 7" chisel tip needles • 2mm Optional Needle Holders available • Oval front tube concentrates needles • Sliding oval front tube adjusts for needle wear
-
Questions? Call us at (866) 812-6252
Novatek's 12 Inline Needle and Chisel Scaler tools are our smallest, most compact scalers providing a thorough and effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare. Features & Benefits • Our smallest, most compact inline scaler • Powerful and light-weight • All steel components offer durability and long-life • 3800 blows per minute gives maximum performance • Low air consumption allows for use on small, portable compressors • Converts to needle or chisel scaler in seconds 12CS100 -Chisel Scalers • 1/2” square shank chisel holder • Equipped with 3/4" wide chisel as standard • 2", 3" & 2 3/8" Bent Chisels available -
Questions? Call us at (866) 812-6252
Rogue is the newest Walk-behind Scraper from National. This all-electric scraper has an infinitely adjustable blade angle and powers through both hard and soft goods removal. Simplified toggle controls, increased travel speed, and fewer loose parts are a few of the features that set this machine apart. Designed as a solution for the global surface prep market, Rogue works in any country with the simple swap of a cord. -
Questions? Call us at (866) 812-6252
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing. SAFETY- Dual rear vacuum ports
- Removable handle and weights for easy transport
- Three-part adjustable angle handle
- Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
- Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
- Variable speed control
- Flip-style weights for added or decreased head pressure
- 18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
- Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
- Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.- Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
- Quick-change swivel head blade holder
- Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
- 21-inch nonmarking tires
- Compact design fits through standard door frames and elevator doors
- Hydraulic brake system automatically engages when the machine is in the off position
- Front caster wheels allow increased maneuverability in tight spaces position
- Improved exhaust system meets federal OSHA regulations
- LED light for increased visibility on the jobsite
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.- Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
- Quick-change swivel head blade holder
- Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
- Nonmarking tires
- AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
- Compact design fits through standard door frames and elevator doors
- Heavy-duty 3000 PSI wheel motors
- Front caster wheels allow increased maneuverability in tight spaces
- LED light for increased visibility on the jobsite
-
Questions? Call us at (866) 812-6252
1 Available Please contact us for delivery and lead times Click here for the full National Flooring Equipment catalogue The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.- Self-contained, limited-maintenance hydraulic fluid
- Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
- Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
- Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
- Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
- Design incorporates nine isolators for the toughest jobs
- Patented isolator overtravel design ensures safety on the toughest jobs
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.- Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
- Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
- Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
- Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
- Transport-wheel rack hanger on back of handle
- Adjustable wheel scrapers prevent material buildup during operation
- Patented isolator overtravel design ensures safety on the toughest jobs
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions. 5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated. 5700HS: Designed to cover more space in less time; specifications made to order. Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.- Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
- Quick-change swivel head blade holder
- Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
- Nonmarking tires
- Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
- Compact design fits through standard door frames and elevators doors
- Front caster wheels allow increased maneuverability in tight spaces
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.- Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
- Quick-change swivel head blade holder
- Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
- Larger/deepened forklift pockets
- Nonmarking tires
- Compact design fits through standard door frames and elevator doors
- Improved exhaust system meets federal OSHA regulations
- Front caster wheels allow increased maneuverability in tight spaces
- 12-volt LED light for increased visibility on the jobsite
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue The 550 walk-behind scraper is ideal for residential work and tight, confined spaces on commercial jobs. This versatile scraper efficiently removes VCT, ceramic, adhesives, paint, rubber and so much more. A removable handle and lightweight design ensure ease of carrying up and down stairs. This compact design also scales down to a trunk-friendly size and is great for DIY floor removal. The 550 is the smallest of our walk-behind scrapers, and is a powerful solution for removing tile and coatings.- Angle-adjustment wheel changes pitch of the blade in seconds
- 1 HP motor with industrial-grade shaft has powerful torque for removing tough applications
- Removable front weight provides additional down pressure and facilitates easy loading/unloading
- Orbital cutting action rotates the blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces. Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.- Variable speed, 12 to 50 feet per minute
- Self-contained, limited-maintenance hydraulic fluid
- Removable 49-pound saddle weight helps increase or decrease down pressure and traction
- Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
-
Questions? Call us at (866) 812-6252
Click here for the full National Flooring Equipment catalogue The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs. This is a special order machine. Please contact us for more information and lead times. Additional carts, power packs and chargers are available for purchase if you require longer run times.- Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
- Quick-change swivel head
- Extra weight compartments
- Larger/deepened forklift pockets
- Nonmarking tires
- Trailer hitch
- Flip-up back lid for quick and easy battery changing
- Front debris deflector protects machine from loose material
- Front caster wheels allow increased maneuverability in tight spaces
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. HTC T8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T8 floor grinder easy to operate, with superior ergonomics and advanced safety features. -
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. HTC T6 is the second largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T6 floor grinder easy to operate, with superior ergonomics and advanced safety features. -
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Husqvarna BMS-220P ride-on scraper is ideally suited for medium and large sized applications. Works well on all applications such as hardwood parquet, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles, etc. The BMS-280P is one of the quickest, most agile and highly productive ride-on floor scrapers designed for large area surface removal. The BMS-280P significantly reduces the amount of time and effort required to remove a wide variety of thick coatings, floor coverings and waterproofing membranes. Everything from carpet and tough ceramic tile to hardwood and VCT are no match for this machine -
Questions? Call us at (866) 812-6252
The SG-8 is our compact and robust surface grinder with a fixed grinding head allowing for a fast and easy transition to edge grinding. To help facilitate consistent passes and even tool wear, the SG-8 comes equipped with our floating tool driver. The tool driver along with the preset wheel position settings result in extremely smooth operation. Lastly, the 2-position handle provides an ergonomic position and an easy way to transport and store the unit. All of these features are complemented by our powder-coated ¼” steel frame to provide durability, longevity, and reduce harsh vibrations. Proudly made in the USA.Features
Excellent dust control Self-leveling head
Fixed head for edge grinding 3-segment floating head taper lock system
3-point hold down Built-in transport handles
Built-in tool storage Wrench holder
2″ dust port
-
Questions? Call us at (866) 812-6252
Features
-
Excellent dust control
-
Front and rear blade pointers
-
Cable depth adjustment
-
Integrated wrench holders
-
1/4" steel frame
-
Heavy duty bearings
-
Dual drive belts
-
2-3" dust port
-
-
Questions? Call us at (866) 812-6252
Features
-
Excellent dust control
-
Front and rear blade pointers
-
Cable depth adjustment
-
Integrated wrench holders
-
1/4" steel frame
-
Heavy duty bearings
-
Dual drive belts
-
2-3" dust port
-
-
Questions? Call us at (866) 812-6252
Features-
Excellent dust control
-
Front and rear blade pointers
-
Cable depth adjustment
-
Integrated wrench holders
-
1/4" steel frame
-
Heavy duty bearings
-
Dual drive belts
-
2-3" dust port
-
-
Questions? Call us at (866) 812-6252
Features-
Locking/swiveling rear casters
-
Excellent dust control
-
Fast depth adjustment
-
Easy blade lift lower
-
Multifunctional
-
-
Questions? Call us at (866) 812-6252
MODEL: TLR-7Remove traffic lines from asphalt – and get the job done quickly!
EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones. Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.- 7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
-
Questions? Call us at (866) 812-6252
The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.- Resurfaces hundreds of sq ft per hour
- Compatible with EDCO Vortex 200 Vacuum for dust-free working
- At only 90lbs it fits inside car trunks when the handlebar is collapsed
- Accepts EDCO Magna-Trap® Slide-On Tooling
-
Questions? Call us at (866) 812-6252
MODELS: 2EC-NG, 2GC-NG
The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight! Multi-Vac port for use with 2″ or 3″ vacuum hose 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts Gas & electric power options available Includes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control 6 grinding accessories required per loading -
Questions? Call us at (866) 812-6252
- Three-position articulating frame adjustment for left angle, right angle or straight position grinding
- Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
- Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
- Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
- Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
- Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
- New & improved tapered roller bearings provide less maintenance and longer life
-
Questions? Call us at (866) 812-6252
The TG-10 is four times faster than conventional grinders.- 10″ Working width will grind approximately 400-500 sq. ft. per hour at 1/16″ with an Magna-Trap® Dyma-Dots
- Grind wet or dry
- Includes 10″ Magna-Trap Multi-Tooling Disc & standard vacuum port
- Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
- Less torque on operator
- Tapered roller bearings have improved seals for longer life and less maintenance
- Adjust your grinder disc or multi-accessory plate with the rear wheel mounted level kit
- Easy access turn style knob
- Install different height diamond accessories and level them to ensure maximum productivity
-
Questions? Call us at (866) 812-6252
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders -
Questions? Call us at (866) 812-6252
MODELS: CPL-8E, CPL-8G- 8″ working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32″ Per Pass
- 8-Inch, 6-Shaft drum accepts carbide and steel cutters
- Etch the surface for new coatings
- Available in 1.5HP Electric or 5.5HP Gasoline
- Comes standard with universal vacuum port hookup
- Uses same carbide & steel cutters as the CPM-8 Model Crete-Plane
-
Questions? Call us at (866) 812-6252
MODELS: CPM-8G, CPM-8E- 8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″
- Removes traffic lines at 800-1,000 lineal ft. per hour
- Power source over drum to eliminate vibration and maximize surface contact
- Compact design
- Front-mounted lifting handle makes loading and unloading easy
- Vacuum port equipped
-
Questions? Call us at (866) 812-6252
Model: SS-20- Stressproof, precision-machined, 1 3/4″ steel arbor shaft
- Includes electric start, 12-volt battery and heavy-duty 15-amp charging system
- Swing-away, rear 3-gallon fuel tank
- Screw-type depth control w/lock guarantees accurate cutting
-
Questions? Call us at (866) 812-6252
Model: DS-20 BLADE NOT INCLUDED- 20″ Blade Capacity
- NEW & Improved throttle cable
- Easy turn crank, for lowering and raising blades in and out of cut
- Heavy-Duty Anti-Vibration engine mount!
- Screw boot belt tensioner prevents frame damage
- 7-gauge steel blade guard with welded protective segment flap
- Heavy-Duty lifting bail for easy loading and unloading
- 13 HP gasoline engine or 7.5 HP electric options
- Heavy-Duty 7-gauge steel laser cut frame
- Large screw-type depth control
- Wide-T handles with rubber grips
- Solid-Steel lifting handles
- High quality molded rubber wheels
-
Questions? Call us at (866) 812-6252
Model: KL-18 BLADE NOT INCLUDED- 18″ blade capacity
- NEW & Improved throttle cable
- Easy turn crank, for lowering and raising blades in and out of cut
- Screw boot belt tensioner prevents frame damage
- 7-gauge steel blade guard with welded protective segment flap
- Heavy-Duty lifting bail (optional)
- 13 HP gasoline engine
- Heavy-Duty 7-gauge steel laser cut frame
- Large screw-type depth control
- Wide-T handles with rubber grips
- High quality molded rubber wheels
-
Questions? Call us at (866) 812-6252
MODEL: KL-14- 14” Blade Capacity
- Specifically Designed Collapsable Handlebar For Easy Storage under Shelving
- Heavy-Duty Box Frame Construction
- Laser Fabricated Thick Steel Material
- Easy-Use Hand Wheel Depth Control
- Misting system for wet cutting
- Thick steel blade guard for added safety
- Easy access belts and bearings for fast maintenance
- Existing and proven EDCO Saw features condensed into a 3ft x 1.5ft footprint
-
Questions? Call us at (866) 812-6252
Models: CPM-10G, CPM-10E- 10″ working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8″
- 1/4” steel frame
- Heavy-duty, oversized bearings
- Weighs 299 lbs. with cutters
- Tethered emergency stop switch
- Larger 6” wheels in the rear for easy handling
- Gasoline or Electric models available
- Vacuum port standard for dust-free cutting
- 6-Shaft and 8-Shaft easy change, side loading drums available
- Tungsten carbide or steel cutters available
-
Questions? Call us at (866) 812-6252
MODELS: CPU-10FC-G, CPU-10-FC-E - 10″ working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8″
- Adjustable depth control up to 3/16″ working depth per pass
- Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
- Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
- Includes lifting bail, oil alert and hour meter
- Optional outrigger axle enables the CPU-10(FC) to follow slab contours closely when working on uneven surfaces
- Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes
-
Questions? Call us at (866) 812-6252
The BMG-780 ULTRAPRO is available in two power options, the 230Volt and the 480 Volt and is the ideal machine to prepare surfaces prior to new coatings, like removal of old coatings or adhesive residues, to smooth or flatten concrete slabs including curled expansion joints, or to just simply remove unsightly surface imperfections. For decorative concrete applications, it is an ideal system for polishing concrete to a high shine or restoring old slabs for newer architectural finishes. The floating shroud with brush skirt is an added feature for those types of processes.- Virtually dust free when connected to BDC-3140LP
- 3 head planetary design
- Variable speed control
- Ideal for large jobs such as malls, airports, hotels, schools, hospitals, and food preparation industries
-
Questions? Call us at (866) 812-6252
Commercial Grinding Greatness. Comes with (1) 30lb weight The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects. The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios. These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring. -
Questions? Call us at (866) 812-6252
The SCB-1200-K separates itself from the competition with its removable dumping dust bin and attachment interchangeability making it easy for you switch between shot blasting, scarifying and diamond grinding for all your surface preparation needs. -
Questions? Call us at (866) 812-6252
The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system. -
Questions? Call us at (866) 812-6252
The D-1800-FT4 separates itself from the competition with its hydraulic dumping dust bin and attachment interchangeability making it easy for you switch between shot blasting, scarifying and diamond grinding for all your surface preparation needs. -
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Super 7R is the most efficient wood floor edger in the industry. Designed for both power and durability, it has been the edger of choice for the pro contractor for over 50 years. Equipped with a quick release dust bag and the ability to attach directly to a vacuum, this edger continues to outpace the competition. Features:- Hardened steel pinion with brass drive gear reduces vibration.
- Precision-balanced sanding pad produces finer finish.
- Powerful 1 hp motor maintains speed under the heaviest cutting conditions.
- Rotating dust pipe swivels 210 degrees to allow access to tight spaces and easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment.
- Quick release dust bag that slides on and off with a simple twist and pull.
- Transparent molded plug has an internal light that serves as a power indicator.
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Sander 1600 Rotary Sander was designed and innovated specifically for the demands of wood floor sanding and finishing. The added weight and balanced design deliver the most aggressive sanding, highest productivity and smoothest operation of any rotary sander on the market. The Sander 1600 can be used with the American Sanders HydraSand Multi Head Sanding Disc. The HydraSand attachment mounts to any rotary sander and utilizes six 5” pads mounted to a thick steel plate. The steel construction produces a product that is 15% more effective than leading competitive units. Features:- Powerful, fully enclosed, 1.5 hp motor.
- Low profile design allows access under cabinets and toe-kicks.
- Ergonomic handle.
- Super grip pad driver (not shown).
- Bright, fluorescent light, for increased visibility.
- Durable bristle skirt helps contain dust.
- Dust control ready.
- Gray, non-marking transport wheels.
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The RS-16 and RS-16DC Rotary Sanders offer strength, durability, and ease of use for those aggressive sanding jobs. Available in standard or dust control (DC) models, these rotary sanders come with a powerful 1.5 hp motor that provides smooth operation and aggressive sanding at an economical price. Features:- Powerful 1.5 hp motor provides smooth operation and aggressive sanding.
- Gray non-marking wheels and power cord protect the floor.
- Innovative “wiper” style switch keeps the motor contacts clean.
- Chrome plated steel housing, motor cover, and handle tube provide maximum durability.
- Dust port easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment. (DC model only)
- Transparent molded plug has an internal light that serves as a power indicator.
- Grip face pad driver supplied with the machine (not shown).
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The random-orbital sanding action of the OBS-18 and OBS-18DC removes the scratch patterns left by drum or rotary sanders, leaving a smooth, flat floor ready for refinishing. At 3,600 orbits per minute, the OBS-18 sands faster than any other orbital sander available. With torque-less operation for enhanced operator comfort, the OBS-18 and OBS-18DC are perfect for interim “screen and recoat” and fine finish sanding jobs. Features:- The totally enclosed, fan cooled motor, eliminates overheating and the need for motor cleaning.
- Heavy duty cast aluminum main frame and pad driver plate for added strength.
- Independent dust pickup fan for effective dust containment (DC model only).
- Dust pipe allows for easy attachment of 1-1/2 or 2 inch vacuum hoses for improved dust containment.
- Bristle dust skirt to aid in dust containment (not shown).
- Transparent molded plug has an internal light that serves as a power indicator (not shown).
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The FloorCrafter upholds a long tradition of providing precision instruments to a craftsman’s trade. The FloorCrafter, engineered to be the most aggressive belt machine in the industry, was also designed to provide reduced vibration. Its cutting ability allows the hardwood sanding professional the ability to increase production while achieving perfect results. With the patented Dolly Transport system, the FloorCrafter is truly a unique and innovative approach to hardwood floor sanding. Features:- Precision balanced drum with machined spiral cooling slots.
- Patented one-tool leveling adjustment.
- Recessed drum door provides better air seal and eases abrasive installation and adjustments.
- Patented Dolly Transport System eases transport to and from job sites.
- Exclusive “feathering” drum lowering handle eases operation.
- Exclusive split rear caster for smooth forward/reverse transitions.
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-Sand orbital floor sander features a powerful three-motor, triple-head design that allows it to effectively sand large, open areas. At the same time, the compact design makes it easy to sand edges, wall lines and closets. Its modular design allows the handle to quickly separate from the base of the machine, making it incredibly easy to transport to and from any home or job-site. The EZ-Sand is equipped with a self-contained dust collection system or it may be attached to an external dust containment system. Features:- Safety interlock prevents accidental starts.
- U-Joint style handle base for easy maneuverability.
- Rugged 1.5 inch steel handle tube is chrome plated to prevent corrosion.
- Rear mounted dust bag for excellent visibility.
- Lifting handle for easy transport.
- Die-cast aluminum handle with molded on rubber grips for durability and comfort.
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-E Extension Edger is the perfect tool for tackling the most difficult edging challenges, including toe-kicks and radiators. Available in 8″ and 13″ interchangeable configurations, the EZ-E gives you the reach needed to deliver beautiful results. The EZ-E can be run with the included quick release dust bag or can attach directly to a vacuum and comes with a soft case for storage and transport. Features:- Extension arm allows for reaching under toe-kicks or radiators
- Precision-balanced sanding pad produces finer finish.
- Powerful 1 hp motor maintains speed under the heaviest cutting conditions.
- Rotating dust pipe swivels 210 degrees to allow access to tight spaces and easily attaches to 1-1/2 inch or 2 inch vacuum hoses for improved dust containment.
- Quick release dust bag slides on and off with a simple twist and pull.
- Tool-free adjustment of rear casters speeds adjustments.
-
Questions? Call us at (866) 812-6252
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you “feather” the drum like the pros. Features:- Heavy duty 1-1/2 hp dual capacitor motor provides power for the most demanding jobs.
- Disassembles easily for transport or storage.
- Totally enclosed dust free motor eliminates motor cleaning.
- 40 ft. gray rubber covered power cable provides longer reach.
- Rugged cast aluminum construction designed for years of service.
Shop American made commercial surface preparation equipment and accessories. Free shipping on select products. For assistance in choosing the right machine, please call us at (866) 812-5262. Trade-ins welcome and we offer competitive financing for qualified customers.