Industrial Cleaning & Surface Preparation Equipment Specialists (866) 662-6710
  • Questions? Call us at (866) 812-6252

    First-Class Floor Polishing.

    The Cimex Diamond Finisher allows for successive stages of floor preparation on concrete, marble, granite, terrazzo and stone floors to be completed more rapidly and with less effort than is possible by conventional methods. The three-headed, counter rotating system of our Cimex Diamond Finisher works in tandem with a selection of diamond faced finishing discs. These discs are graded from coarse to fine to accommodate newly laid floors, damaged stone and surface re-polishing. The generous 6.6 gallon solution tank allows for long stretches of uninterrupted usage during wet applications. Thanks to its superior design, the Cimex Diamond Finisher maintains constant pressure on all surfaces. This allows for clean, even cutting without the rotational scoring often found in other floor finishing systems. Also featured is the forward and reverse function. This allows the machine to operate in both directions, ensuring a smooth finish.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The 5000DL is a compact, ride-on floor scraper.  Featuring the same technology as our patented line of scrapers, this machine is designed with a low-profile frame that increases ease of transport and maneuverability on the job. Power Supply: Battery 48V Width: 24.5" Height: 48" Length: 63" Weight: 2,105 lb Removable Weight: 445 lb Speed: up to 160 ft/min Voltage & Frequency: 115V/60Hz
  • Questions? Call us at (866) 812-6252

      Turn the biggest challenges into small ones. Handle the most complex cleaning environments with confidence, in any industry. Unmatched Reliability: Proven cylindrical deck design increases lifespan by up to 4x. Easier Than Ever: All command functions are integrated into the steering wheel. Quick access allows for seamless on the go adjustments. Operator's hands are always in contact with the wheel. Quick and Nimble: Access those hard to reach places with a best in class turning radius of 63 inches (160 cm).
    • 6+ hours typical run time with 420 Ah battery for maximum cleaning coverage per battery charge
    • Safe operations ensured by features such robust bumpers, automatic and mechanical braking, Clear-View™ design, and ergonomic operator interface
    • Ease of operation via a comprehensive control panel with one button scrub system start and stop, and LCD display
    • For light or heavy jobs, the dual vacuum system (optional) provides optimal performance from start to finish
    • Adjustable work settings for greater task flexibility during operation on different floors
    • Optional right side broom for 32" cylindrical version allows cleaning to the very edge of every wall and obstruction
    • SmartFlow™ reduces detergent costs and extends time between dump-and-refill while using up to 50% less water
    • Optional EcoFlex™ helps you clean optimally and reduce detergent costs by adjusting cleaning power based on what's truly needed, at the touch of a button
  • Questions? Call us at (866) 812-6252

    The SG-8 is our compact and robust surface grinder with a fixed grinding head allowing for a fast and easy transition to edge grinding. To help facilitate consistent passes and even tool wear, the SG-8 comes equipped with our floating tool driver. The tool driver along with the preset wheel position settings result in extremely smooth operation. Lastly, the 2-position handle provides an ergonomic position and an easy way to transport and store the unit. All of these features are complemented by our powder-coated ¼” steel frame to provide durability, longevity, and reduce harsh vibrations. Proudly made in the USA.

    Features

    Excellent dust control                                                                 Self-leveling head

    Fixed head for edge grinding                                                     3-segment floating head taper lock system

    3-point hold down                                                                       Built-in transport handles

    Built-in tool storage                                                                    Wrench holder

    2″ dust port

     
  • Questions? Call us at (866) 812-6252

    Features

    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • Questions? Call us at (866) 812-6252

    Features
    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • Questions? Call us at (866) 812-6252

    Features

    • Excellent dust control

    • Front and rear blade pointers

    • Cable depth adjustment

    • Integrated wrench holders

    • 1/4" steel frame

    • Heavy duty bearings

    • Dual drive belts

    • 2-3" dust port

  • Questions? Call us at (866) 812-6252

    Features
    • Locking/swiveling rear casters

    • Excellent dust control

    • Fast depth adjustment

    • Easy blade lift lower

    • Multifunctional

  • Questions? Call us at (866) 812-6252

    The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.
  • Questions? Call us at (866) 812-6252

    Rogue is the newest Walk-behind Scraper from National.  This all-electric scraper has an infinitely adjustable blade angle and powers through both hard and soft goods removal.  Simplified toggle controls, increased travel speed, and fewer loose parts are a few of the features that set this machine apart. Designed as a solution for the global surface prep market, Rogue works in any country with the simple swap of a cord.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. The Husqvarna BMS-220P ride-on scraper is ideally suited for medium and large sized applications. Works well on all applications such as hardwood parquet, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles, etc. The BMS-280P is one of the quickest, most agile and highly productive ride-on floor scrapers designed for large area surface removal. The BMS-280P significantly reduces the amount of time and effort required to remove a wide variety of thick coatings, floor coverings and waterproofing membranes. Everything from carpet and tough ceramic tile to hardwood and VCT are no match for this machine
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. HTC T6 is the second largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T6 floor grinder easy to operate, with superior ergonomics and advanced safety features.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. HTC T8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T8 floor grinder easy to operate, with superior ergonomics and advanced safety features.
  • The new re-designed range of Multiwash PRO scrubber dryers will wash, scrub and dry in just one single pass. Giving improved cleaning results, your floors will be left clean and dry ready for your customers and staff to walk on.

    Questions? Call us at (866) 812-6252

     
  • Simple, maneuverable and effective all-in-one spray extraction machine for carpet and upholstery cleaning. Ideal for small to medium carpeted areas in healthcare environments, nursing homes, leisure facilities, schools and offices.  
    • Easy to use all-in-one machine
    • Powerful built-in rotary brush lifts dirt from deep within the carpet
    • Powerful vacuum, pump and brush motors give maximum productivity
    • High capacity solution tank for maximum cleaning and minimum refilling
    • The transparent recovery tank lid allows you to see the dirty water
    • Quick fit spray jet for easy cleaning and maintenance
    • Robust construction, built for minimum maintenance
    • Simple to maneuver
    • Large non-marking, stair-climbing wheels
    • Easy fit accessories for upholstery and stair cleaning
    • Convenient visual instructions on machine for ease of use
      Includes upholstery kit with separate storage bag Integrated handle top button spray control  Highly visible operative switch panel Fold-down handle for easy storage

    Questions? Call us at (866) 812-6252

     
  • Request Quote for Best Price 

    (866) 812-6252

    Say goodbye to the hassle of cleaning big messes by hand AND on foot. Look no further than the K42 Disk Ride-On Floor Scrubber. This remarkable machine is ideal for old buildings with uneven floors, the Disk Scrub Deck has a natural gimble and will meet your mess head on without missing a beat. Handmade in the USA, the steel frame is as tough as the country that inspired it. It was important to create a budget-conscious machine and the K42 is a testament to that. Throw away the cheap imports and upgrade to the American K42 Ride-On Disk Floor Scrubber today!
  • Questions? Call us at (866) 812-6252

      The Cimex Carpet Machine sets the industry standard for low moisture carpet encapsulation cleaning. This method of shampooing uses a polymer solution that encases or “encapsulates” the dirt particles. The low moisture aspect of this approach means that it uses very little water compared to the more common hot water extraction technique. As such, you can feel good about reducing waste water and ultimately operating cost. That being said, the main reason to use this machine is the science behind the encapsulation process itself. A frequent problem with regular carpet cleaning is that extractors use a soapy detergent that leaves behind a sticky residue. New dirt particles cling to this residue left on the carpet fibers, thus causing re-soiling. The encapsulation process creates a hard crystal shell around the dirt. Said dirt is then completely removed by vacuuming. Afterwards, the dust bags are neatly discarded. This stands in stark contrast to the dumping of many gallons of dirty water.
  • Request Quote for Best Price 

    (866) 812-6252

    Cleaning Path: 20 - 26in (51 - 66cm)
    Solution Tank Capacity: Sol: 22gal (83L) Rec: 23gal (87L)
    Run Time: Up to 4 hours The K22R Disk scrubber is our latest design, available in a 20inch or 26-inch scrub path. The disk deck offers the lowest maintenance cost and improved cleaning on irregular floors. Each brush is individually driven for unmatched performances. The K22R Disk excels in environments such as healthcare, grocery, and educational facilities. It’s ability to fit through 31-inch entryways makes it a versatile machine, capable of maneuvering between various rooms. Like the other K22 Series, it comes standard with an all-steel frame, and a tip back tank. The K22R also has a variety of options, like our degreaser tank, and 100PSI spray gun, lights, and a mixture of battery options.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. Husqvarna S 11 is a compact and portable H-classified wet and dry industrial vacuum cleaner for general cleaning and handheld tools. It is equipped with HEPA-filters and offers automatic filter cleaning by shaking the filter during operation for a continuous air-flow. This vacuum unit is very easy to transport and handle thanks to its compact design, low weight and convenient carry handle.
  • Questions? Call us at (866) 812-6252

    *Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements. W 70 P is a powerful industrial wet and slurry vacuum designed for the toughest jobs. This is achieved by using high quality stainless steel components and a special combination of filter and float that protects the motor. Where most wet vacs can only handle water, W 70 P can deal with liquids such as concrete slurry, oils and machining coolants. Recommended for concrete drilling, sawing, grinding and wall/wire sawing. Ingenious solutions make W 70 P easy to work with. Pumping out can take place at the same time as suction. Emptying is carried out via a large bottom valve for simple cleaning. The non-marking wheels are puncture-free and lock at the front.
  • Questions? Call us at (866) 812-6252

    Commercial Grinding Greatness. Comes with (1) 30lb weight The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects. The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios. These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring.
  • Questions? Call us at (866) 812-6252

    • 22″ Working Width grinds approximately 500 sq. ft. per hour at 1/32″ – 1/16″ per pass with Magna-Trap® Dyma-Dots
    • Includes 2-Slide-On Multi-Accessory Discs, which accept all EDCO Magna-Trap® Tooling
    • 2-3″ Vacuum Port and Water Port
    • 6 Magna-Trap® Tooling accessories required per loading
    • Fully adjustable rubber dust shroud
    • Optional triangular polishing head for full coverage available
  • Questions? Call us at (866) 812-6252

    The TG-10 is four times faster than conventional grinders.
    • 10″ Working width will grind approximately 400-500 sq. ft. per hour at 1/16″ with an Magna-Trap® Dyma-Dots
    • Grind wet or dry
    • Includes 10″ Magna-Trap Multi-Tooling Disc & standard vacuum port
    • Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
    • Less torque on operator
    • Tapered roller bearings have improved seals for longer life and less maintenance
    • Adjust your grinder disc or multi-accessory plate with the rear wheel mounted level kit
    • Easy access turn style knob
    • Install different height diamond accessories and level them to ensure maximum productivity
  • Edco 20″ Self-Propelled Saw

    $10,035.45$12,971.58

    Questions? Call us at (866) 812-6252

    Model: SS-20
    • Stressproof, precision-machined, 1 3/4″ steel arbor shaft
    • Includes electric start, 12-volt battery and heavy-duty 15-amp charging system
    • Swing-away, rear 3-gallon fuel tank
    • Screw-type depth control w/lock guarantees accurate cutting
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
    • Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Transport-wheel rack hanger on back of handle
    • Adjustable wheel scrapers prevent material buildup during operation
    • Patented isolator overtravel design ensures safety on the toughest jobs
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces. Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
    • Variable speed, 12 to 50 feet per minute
    • Self-contained, limited-maintenance hydraulic fluid
    • Removable 49-pound saddle weight helps increase or decrease down pressure and traction
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
  • National 5700 Ride-On Scraper

    $43,736.56$50,132.18

    Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions. 5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated. 5700HS: Designed to cover more space in less time; specifications made to order. Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
    • Quick-change swivel head blade holder
    • Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
    • Nonmarking tires
    • Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
    • Compact design fits through standard door frames and elevators doors
    • Front caster wheels allow increased maneuverability in tight spaces
  • Questions? Call us at (866) 812-6252

    Click here for the full National Flooring Equipment catalogue Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.
    • Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
    • Quick-change swivel head blade holder
    • Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
    • Nonmarking tires
    • AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
    • Compact design fits through standard door frames and elevator doors
    • Heavy-duty 3000 PSI wheel motors
    • Front caster wheels allow increased maneuverability in tight spaces
    • LED light for increased visibility on the jobsite
  • Questions? Call us at (866) 812-6252

      For Sale, The 225FP is a corded floor care machine powered by a 1.5 HP UL approved high torque motor and equipped with a triple planetary gearbox. Available in two widths, 17 inches (43 cm) and 20 inches (51 cm), the 225FP produces up to 6,000 square feet (557 square meters) and 7,000 square feet (650 square meters) of polished floor per hour, respectively. The machine comes equipped with a pad holder. The machine comes equipped with a padholder and is available with an optional solution tank.
  • Questions? Call us at (866) 812-6252

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed Multi-Vac port for use with 2″ or 3″ vacuum hose 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders
  • Questions? Call us at (866) 812-6252

    • Three-position articulating frame adjustment for left angle, right angle or straight position grinding
    • Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
    • Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
    • Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
    • Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
    • Comes standard with Magna-Trap® Accessory Disc, but is also available with optional Flex Head Assembly or Rigid Head Assembly for doing gutter work
    • New & improved tapered roller bearings provide less maintenance and longer life
  • Questions? Call us at (866) 812-6252

    MODELS: 2EC-NG, 2GC-NG

    The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.

    GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling. GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life. VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used. NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight! Multi-Vac port for use with 2″ or 3″ vacuum hose 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts Gas & electric power options available Includes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control 6 grinding accessories required per loading
  • Questions? Call us at (866) 812-6252

    The TL-9 is a Direct Drive Grinder with a combination of power and simplicity. The 110-Volt grinder is maintenance free. No parts to service and no belts to replace.
    • Resurfaces hundreds of sq ft per hour
    • Compatible with EDCO Vortex 200 Vacuum for dust-free working
    • At only 90lbs it fits inside car trunks when the handlebar is collapsed
    • Accepts EDCO Magna-Trap® Slide-On Tooling
  • Questions? Call us at (866) 812-6252

    Model: KL-18 BLADE NOT INCLUDED
    • 18″ blade capacity
    • NEW & Improved throttle cable
    • Easy turn crank, for lowering and raising blades in and out of cut
    • Screw boot belt tensioner prevents frame damage
    • 7-gauge steel blade guard with welded protective segment flap
    • Heavy-Duty lifting bail (optional)
    • 13 HP gasoline engine
    • Heavy-Duty 7-gauge steel laser cut frame
    • Large screw-type depth control
    • Wide-T handles with rubber grips
    • High quality molded rubber wheels
  • Questions? Call us at (866) 812-6252

    1 Available  Please contact us for delivery and lead times Click here for the full National Flooring Equipment catalogue The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
    • Self-contained, limited-maintenance hydraulic fluid
    • Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
    • Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
    • Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
    • Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
    • Design incorporates nine isolators for the toughest jobs
    • Patented isolator overtravel design ensures safety on the toughest jobs
  • Questions? Call us at (866) 812-6252

    Cimex Machine Includes: 1 Box of Pads Qty 15 1 Quart of Strike Out Spotter 1 Quart of Odor Zyme 4 Gallons of Crystallizing Cleaner The Cimex Carpet Machine sets the industry standard for low moisture carpet encapsulation cleaning. This method of shampooing uses a polymer solution that encases or “encapsulates” the dirt particles. The low moisture aspect of this approach means that it uses very little water compared to the more common hot water extraction technique. As such, you can feel good about reducing waste water and ultimately operating cost. That being said, the main reason to use this machine is the science behind the encapsulation process itself. A frequent problem with regular carpet cleaning is that extractors use a soapy detergent that leaves behind a sticky residue. New dirt particles cling to this residue left on the carpet fibers, thus causing re-soiling. The encapsulation process creates a hard crystal shell around the dirt. Said dirt is then completely removed by vacuuming. Afterwards, the dust bags are neatly discarded. This stands in stark contrast to the dumping of many gallons of dirty water.
Go to Top