*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The NEWEpoch HD is a 230V dual speed, multi-purpose machine with the muscle to handle the toughest floor jobs. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness.
Features:
230V, 2.5HP motor for loads of low-end torque without overloading household circuits.
Dual speed capability for use with various grits, wood types, and job site conditions.
Removable weight bracket to provide better access to tight spaces.
Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.
Bright, flexible LED light (with replaceable bulb) for improved visibility.
Heavy duty 6” wheels for added stability.
Exclusive tilt-back wheel system protects pad drivers from damage.
Dust control ready.
Durable rigid, low profile skirt contains dust and allows close access to wall lines
The SB-6 Shot Blaster is your lightweight, portable solution for small to medium size jobs. Its various applications make it one of the most versatile surface prep machines available. The SB-6 features an adjustable handle that allows you to pull or push the unit. This feature allows you the ability to blast in any corner including under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. By interchanging the rear liner the SB-6 can blast 4” and 5” line stripes in minutes. The SB-6 was designed to incorporate the liners and housing into one part giving you the ability to replace any and all wear components. When connected to the A-101 Pulse Vac, you achieve a virtually dust-free shot blast system.
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used.
Extra Weight Standard: This bolted-on weight tray helps the machine work. Use when needed
Multi-Vac port for use with 2″ or 3″ vacuum hose
11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap® Dyma-Dots Electric machine plugs into dedicated residential wall outlets
Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and all other Magna-Trap® accessories. 3 grinding accessories required per loading
EDCO’s Vortex 200 Vacuum System suppresses all the dust created by EDCO Grinders
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes.
The Novastrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The Novastrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.
To use, simply plug the unit into any 20 amp, 110volt grounded outlet, place the machine over tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles.
Features
• 378 square inch footprint removes 2-12”x12” in one cycle
• Operates off of 110v - 20amp current
• Identical controller to the N1026
• Compact design allows easy access to tight spaces.
• Heavy duty and light-weight aluminum construction
Commercial Grinding Greatness.
Comes with (1) 30lb weight
The Cimex Surface Scarifier tackles a wide range of preparation jobs at a blistering pace. You can count on the Surface Scarifier to excel at difficult projects such as the removal of impacted oil, grease and debris from concrete floors. In addition, it easily eliminates rust, paint and oil build up from steel plates as well as adhesives and foam backing from carpet removal projects.
The Cimex Surface Scarifier combines our patented, counter rotating system with a wide selection of cutter tools, wire brushes, diamond grinding blades, diamond resin polishing pads and carbide scraping blades. All of which are designed to tackle extreme coating removal and concrete scarifying scenarios.
These machines are built to take the punishment of the most difficult industrial applications. Their unique design maintains constant pressure over an evenly dispersed area because of the centrally mounted motor. This helps in avoiding uneven cutting and rotational scoring.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The NEWEpoch HD-20 is a 20” version of the famed 230V dual speed Epoch HD. This multi-purpose machine delivers power and productivity. Used on low speed, the machine can be used as a traditional buffer for intercoat abrasion, fine finishing and polishing, or stain application. Used on high speed with the HydraSand 20, the Epoch acts as a planetary sander, abrading and flattening floors. Removable weights allow for various levels of aggressiveness.
Features:
230V, 2.5HP motor for loads of low-end torque without overloading household circuits.
Dual speed capability for use with various grits, wood types, and job site conditions.
Multi-plate 25-lb weight kit allows for adjustments in sanding aggressiveness.
Removable weight bracket to provide better access to tight spaces.
Bright, flexible LED light (with replaceable bulb) for improved visibility.
Exclusive tilt-back wheel system protects pad drivers from damage.
Dust control ready.
Durable rigid, low profile skirt contains dust and allows close access to wall lines
With HydraSand 20 compared to traditional 20” planetary head:
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
FS 600 E is a versatile CE-Eurotest certified electric small push floor saw for left and right hand sawing suitable for indoor sawing. Optimised weight and balance to ensure ergonomic working position and zero CO₂ emissions during use. The built in water tank enables to cut without external water supply. Suitable for small sized service and repair jobs for a majority of floor sawing applications.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
When you need the ultimate fine finish, the 3DS Orbital Sander outperforms the competition with three rotating discs that provide cross-grain sanding and efficient dust control. The 3DS is perfect for providing a smooth, flat floor on parquet, herringbone and ornamental pattern wood floors.
Features:
(3) 8″ high speed rotating discs eliminate the need for “with grain” sanding.
3 HP fully-enclosed motor requires less maintenance.
Large non-marking tires provide ease of transport.
Vacuum operates independent of sander–performs double duty.
Large dust containment chamber provides longer operation times.
The Cimex Diamond Finisher allows for successive stages of floor preparation on concrete, marble, granite, terrazzo and stone floors to be completed more rapidly and with less effort than is possible by conventional methods.
The three-headed, counter rotating system of our Cimex Diamond Finisher works in tandem with a selection of diamond faced finishing discs. These discs are graded from coarse to fine to accommodate newly laid floors, damaged stone and surface re-polishing. The generous 6.6 gallon solution tank allows for long stretches of uninterrupted usage during wet applications.
Thanks to its superior design, the Cimex Diamond Finisher maintains constant pressure on all surfaces. This allows for clean, even cutting without the rotational scoring often found in other floor finishing systems. Also featured is the forward and reverse function. This allows the machine to operate in both directions, ensuring a smooth finish.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you “feather” the drum like the pros.
Features:
Heavy duty 1-1/2 hp dual capacitor motor provides power for the most demanding jobs.
Disassembles easily for transport or storage.
Totally enclosed dust free motor eliminates motor cleaning.
40 ft. gray rubber covered power cable provides longer reach.
Rugged cast aluminum construction designed for years of service.
With A working width of 20” and a wide range of grinding, sanding, polishing, and scraping attachments, the Spirogrinder series is highly versatile and delivers excellent results on a wide variety of floor surfaces including marble, terrazzo, stone and concrete. All Spirogrinder machines may be used for wet or dry applications, and the VS models offer complete
control over operating speed. Three specially designed rotating heads mounted on a counter-rotating planetary driver grind coatings and paint off of hard floor surfaces to leave a smooth, open, professional finish. Brush skirt and optional vac system enables dust-free operation on all models, and optional, add-on stackable 20, 30 or 35 lb. weights are also available. Spirogrinder machines are well-engineered, sturdy, economical, efficient, and so easy to use that even unskilled personnel can produce expert results.
The DL3000 is precisely engineered and designed calibrations on rugged steel frames with washable integrated filters. These filters are simple to maintain and reinforced in a sturdy float-and-flow system. Equipped with a Longopac bagging system, the DL3000 exceeds HEPA standards. This new age of dust control power is another display of our dedication to you and your valuable assets.
DL3000 Dust Collector, 230 V
SAFETY
Included with the machine is an individually tested HEPA filter with a minimum efficiency of 99.995 percent at 0.14 microns; a rugged steel frame provides support during transport and use
PERFORMANCE
Primary filter
Heavy-duty, anti-static collection hose provides durability and safety
BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one-handed operation controls for raising and lowering heads, and easy to turn manual steering were designed with the contractor in mind. The SC-12 Scarifying Head attachment is a state of the art design that is self-leveling, automatically adjusting itself to different contours of the floor or pavement. You will achieve an accurate removal of thin mill coatings to 1/4” overlays. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages you can go from steel to carbide cutters as well as different cage widths in minutes. The SCB-1200 with SC-12 Scarifier Head Attachment will put you ahead of the competition with its faster production rates, and a vacuum collector system that eliminates dust and removes all material from the scarified surface.
The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines.
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap® Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator , and increases accessory life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used.
NEW Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight!
Multi-Vac port for use with 2″ or 3″ vacuum hose
22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts
Gas & electric power options availableIncludes 2 magnetic multi-accessory discs which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories
Counter-rotating discs prevent machine from pulling side to side and give operator greater control
6 grinding accessories required per loading
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
PG 450 is a versatile and user-friendly planetary floor grinder. Perfect for a wide range of applications, e.g. coating removal, concrete grinding and concrete polishing. It is ideal for rental and both professional and semi-professional applications due to its many self-adjusting benefits.
Designed for small jobs and tough-to-reach spaces, this 16-inch planetary grinder creates the perfect profile for new coatings. This easy-to-operate machine features an edge grinder, dual-speed operation, an adjustable handle, and a floating dust skirt for maximum efficiency.
SAFETY
Quick-release levers allow the machine to be separated into two pieces for easy transport
LED light illuminates the surface directly behind the machine
COMFORT
Fully adjustable handle accommodates a range of operating positions
PERFORMANCE
Capable of edge grinding on the left or right side of the machine by rotating the side of the dust skirt up, allowing the operator to grind within a half inch of the wall
Removable weights give the operator freedom to increase or decrease head pressure when grinding
16-inch grinding plate incorporates a floating tooling assembly that allows the cutting head to follow the contours of the floor; the tooling assembly rotates 180 degrees for easy tooling changes
Dual-speed motor increases the versatility of this machine; operating at high or low speed
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
PG 400 is a versatile and very productive single disc floor grinder for a wide range of applications. With its 400 mm wide grinding width it efficiently grinds adhesives, paint, epoxy and spackle on medium to large concrete areas.
Click here for the full National Flooring Equipment catalogue
This hydraulic, walk-behind scraper removes the worst of today’s soft goods, such as glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more. The compact design makes it ideal for use in tight spaces.
Achieve clean, efficient scraping by adding the 6280-505 swivel head attachment to your machine. The design of this attachment allows the blade to stay in contact with the surface as the machine rolls over uneven terrain.
Removable 49-pound saddle weight helps increase or decrease down pressure and traction
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BG 250 is a single disc concrete grinder designed for heavy duty surface preparation applications. BG 250 is very easy and comfortable to use with low vibrations. Thanks to its two front handles, it is possible to lift the machine up a flight of stairs. BG 250 has an asymmetric dust exhaust with a built-in deflector for improved/optimised dust extraction. In addition, it is equipped with a special drive system for optimum load distribution.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The BG 250P is a petrol-powered grinder designed to give you all the functionality and versatility you need for a wide range of surfaces. With a single grinding head, this machine focuses all its pressure onto a single diamond disc for more effective and aggressive grinding. The BG 250P is ideal for applications requiring heavy duty surface preparation of small to medium sized floors such as surface levelling, the removal of coating defects and adhesives, preparation before coating and much more. Other applications include industrial flooring, concrete preparation and decontamination. This machine is easy to transport and its 3 in diameter dust hose connection manages dust more efficiently, for a safer work environment. Without the need for power cables, you can also enjoy greater mobility on job sites and make more of your time count.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BS 75 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. This machine has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor stripper requires almost no maintenance. In addition, this floor scraper can be disassembled into 3 pieces for easy transportation up flights of stairs and into vehicles. It is also possible to add an additional 10 kg weight to mount on the weight block in order to make BS 75 more efficient on resilient floors. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC 270 EG is a professional edge grinding machine allowing you to grind and polish edges quickly, efficiently and in an ergonomic manner. Instead of working in an uncomfortable position, grinding edges with handheld equipment, this machine makes it possible to tackle edges just as any other part of the floor, standing upright and progressing fast. Every step of the grinding and polishing process can be followed by mounting the same tools under the HTC 270 edge grinder as under the main floor grinder. The high head pressure and ingenious design (which allows for both left and right edge grinding) has earned praise from floor grinding specialists around the world. Additionally the low grinding head height of only 100 mm, enables grinding under shelves or other low-hanging obstacles. The floating cover follows the floor at all times and transportation is easy thanks to the detachable chassis.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The FloorCrafter upholds a long tradition of providing precision instruments to a craftsman’s trade. The FloorCrafter, engineered to be the most aggressive belt machine in the industry, was also designed to provide reduced vibration. Its cutting ability allows the hardwood sanding professional the ability to increase production while achieving perfect results. With the patented Dolly Transport system, the FloorCrafter is truly a unique and innovative approach to hardwood floor sanding.
Features:
Precision balanced drum with machined spiral cooling slots.
Patented one-tool leveling adjustment.
Recessed drum door provides better air seal and eases abrasive installation and adjustments.
Patented Dolly Transport System eases transport to and from job sites.
Many years experience in design and operation of surface preparation equipment have been integrated with the latest computer aided design resulting in the BEF 275 Multiplane Range.
275mm (10.8″) working width
400v 3-phase, gasolene/petrol versions
Rigid, compact design
50mm dust extraction port
Dust free when operated with SPE 316 vacuum
Six flail shafts, heavy duty T.C.T. cutters
Forward mounted cutter drum for perfect balance
Side plate access for quick and easy cutter drum removal
Handle height fully adjustable for operational control
Monocoque construction is rigid, strong and accurate
Accurate depth control for precision surface texture and maximum cutter life
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The heavy-duty dust collection system is remarkably quiet and designed for multi-purpose use with medium to large grinding and polishing machines. The vertical profile is compact and offers great maneuverability with large wheels and two swiveling/locking casters. The ergonomic design also features easily accessible components for care and maintenance.
The BDC-33 is an advanced unit that helps eliminate most all of the airborne dust and particulate generated with grinding and polishing equipment. The PPT is equipped with a wheeled dust-bin that dismounts smoothly for quick debris disposal and with a capacity of 143 lbs. make those efforts infrequent. The BDC-33 dust collector is equipped with the Longopac® bagging system and is perfect for a clean disposal. This powerful industrial vacuum is also perfect for contractors who must utilize a system that satisfies environmental concerns.
Compact unit is easy to maneuver
Fully automatic self-cleaning system for prolonged filter life
The Novastrip 1026 VAT stripper utilizes “Infrared radiant heat” to safely heat tiles, thus breaking the adhesive bond. This process allows you to lift “Intact” tiles in a dustless environment. In the past, wetting and hand scraping was the most common method of this tile removal. An ideal tool for asbestos tile removal.
This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the Novastrip, the job is completed with an absolute minimum volume of waste. This asbestos tile removal machine also cuts labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete it’s cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles.
Features & Benefits
• 1026 square inch footprint removes 6 - 12”x12” tiles in one cycle
• Ceramic coated heat panel provides long life and durability
• Computerized control systems guarantee precise and dependable operation
• 100% solid state electronics. No mechanical relays or solenoids
• Rapid heat up and cool down
• Powder coated aluminum is durable and light-weight
• Triple redundant safety features for operator safety
• Integrated temperature indicator allows for monitoring of panel base
• Operate on standard 220v, 50amp service eliminating external buck boosters”
• 12v DC controls allow for safe, cool operation and long life
• Case grounded for added safety
The DG-25 Diamond Grinder/Polisher is designed for coating removal to high gloss polishing on totally dry concrete. A rubber mounted grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200-K, while removing all material off the surface and reducing cleanup costs and effort. With twin, one piece 16” rubber mounted, belt driven grinding heads that are adjusted up and down using air pressure, giving you infinite adjustability.. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing.
The 420GPHD is the answer to hard floor maintenance. This propane powered floor care machines grinds, polishes, and burnishes hard floor surfaces such as concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors.
Powered by an 18-HP, 603 cc Kawasaki engine, the 420GPHD uses 34 percent less fuel and require 40 percent fewer oil changes than other machines in its class.
The 420GPHD comes equipped with a weight bracket for maximum head pressure as well as a dust port to accommodate a vacuum hose for dry grinding. It comes standard with a heavy-duty diamond driver for traditional 3 inch, (83 mm) diamonds. The 420GPHD comes standard with SafeStop to ensure propane safety and SAFR™ Technology to keep CO levels low even with a dirty air filter
Remove traffic lines from asphalt – and get the job done quickly!
EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones.
Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.
7″ Working width will grind approximately 700-1,000 lineal ft. per hour with EDCO TLR Carbide Cutters
Click here for the full National Flooring Equipment catalogue
The 6280 Commander walk-behind scraper is ideal for soft goods flooring removal. This machine offers quick removal of glued-down floors, gummy commercial carpet, VCT, sheet vinyl, rubber tile, linoleum, indoor and outdoor sport surfaces, roofing material, and more.
The orbital blade action of the 6280 offers a unique method of cutting through the material. This unique removal style extends the life of your walk-behind scraper and reduces maintenance cost.
Secure-mount side slide weights adjust head pressure; slide the weights back to increase weight over drive wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Transport-wheel rack hanger on back of handle
Adjustable wheel scrapers prevent material buildup during operation
Patented isolator overtravel design ensures safety on the toughest jobs
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BS 110 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugged metal for longevity and durability on the site. BS 110 has a forward and backward function and is equipped as standard with speed control. With mainly electronic components, this floor scraper requires almost no maintenance to keep running at peak performance. BS 110 has a standard transport wheel on the front of the machine for ease of transportation on and off sites. It is a very quiet machine that is easy to operate with minimum vibrations. Depending on the type of flooring material you would like to remove, you can choose from a wide range of blades or chisels. This floor scraper is able to remove most (old) floor coverings such as linoleum, vinyl, carpet, adhesives, glue, etc.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The American 8 & 12 Drum Sanders are the worldwide benchmark for professional drum sanding equipment. Its rugged cast aluminum construction, powerful motor and unique operating and drum leveling controls combine to make the most aggressive and most productive drum sander available.
Features:
Totally enclosed 7.5 HP (peak) motor runs cooler and eliminates internal dust build-up.
Drum Pressure Control allows infinite pressure variation for all types of wood.
Heavy-duty vacuum fan and high filtration dust bag provide efficient dust recovery and containment.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The American 8 & 12 Drum Sanders are the worldwide benchmark for professional drum sanding equipment. Its rugged cast aluminum construction, powerful motor and unique operating and drum leveling controls combine to make the most aggressive and most productive drum sander available.
Features:
Totally enclosed 7.5 HP (peak) motor runs cooler and eliminates internal dust build-up.
Drum Pressure Control allows infinite pressure variation for all types of wood.
Heavy-duty vacuum fan and high filtration dust bag provide efficient dust recovery and containment.
The 8274-4 is the only grinder on the market offering 3 HP at 115 volts while operating at a 230-volt level. With variable speed and a soft start to control its amperage draw, the 8274-4 adjusts to the needs of small or large jobs. This machine is well suited for removal of thin-set, coatings, adhesive, prepping concrete for overlays or coatings, and polishing.
SAFETY
Dual rear vacuum ports
Removable handle and weights for easy transport
COMFORT
Three-part adjustable angle handle
PERFORMANCE
Choose from 15A or 20A circuit-breaker settings with a convenient switch on the side of the controller; the 15A selection limits motor draw to 15 amps; the 20A selection pulls up to 20 amps
Forward and reverse directional controls increase tooling productivity with cleaner consumables and more even wear
Variable speed control
Flip-style weights for added or decreased head pressure
18-inch grinding path; uses National’s patented self-tensioning, single-belt design to prepare concrete surfaces to a 3000-resin shine
Adjustable velcro dust guard lets the machine operate within an eighth of an inch of walls and promotes nearly dustless operation
Grinder head rotates 90 degrees for easy tooling change access; Morflex couplers, polishing undulating concrete surfaces or creating a uniform scratch pattern for coating applications; operates a complete dry grind and polish system to eliminate messy and hazardous slurry
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The PG 540 (5.5 hp / 4.0 kW) is a powerful, compact and versatile planetary floor grinder perfect for smaller jobs. Available in both single phase and three phase. It combines a smart compact design for easy transportation with real work-horse performance and sheer grinding power. Thanks to the split-chassis design, the PG 540 fits in most standard cars.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMG 555P is a propane-driven planetary grinder that is designed for horizontal surface preparation of applications covering a variety of sizes. This is an ideal machine for the removal of coatings, concrete grinding and polishing applications. BMG 555P uses a 3 in diameter dust hose connection and a floating shroud to manage dust more efficiently, for a safer work environment. Thanks to its water tank, BMG 555 can also be used for wet grinding and polishing applications. Without the need for power cables, you can also enjoy greater mobility on job sites to make more of your time count.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC D60 is a specifically designed dust extractor for high-performance floor grinding with its remote connection to the floor grinders with Duratiq Technology. A large LCD display provides information about critical data needed for optimal dust extraction – air flow, under-pressure and filter status. An auto-purge function is available as an option to clean the filters via the remote control of the grinders (with Duratiq Technology). Remotely connect your grinder with Duratiq Technology (most suitably HTC 6) to start and stop operation, clean the filter and receive important notifications on the display of your grinder or remote control unit, all so that you can focus on the floor and ultimately save time and money.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The Husqvarna BMS-220P ride-on scraper is ideally suited for medium and large sized applications. Works well on all applications such as hardwood parquet, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles, etc.
The BMS-280P is one of the quickest, most agile and highly productive ride-on floor scrapers designed for large area surface removal. The BMS-280P significantly reduces the amount of time and effort required to remove a wide variety of thick coatings, floor coverings and waterproofing membranes. Everything from carpet and tough ceramic tile to hardwood and VCT are no match for this machine
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC T5 is the smallest machine in the range of grinders with Duratiq technology. This is an ultra-compact and powerful planetary grinder with three grinding discs suitable for all types of grinding jobs and is available with either a 2.2 or 4 kW motor version. Just as the large models with Duratiq Technology, the machine is equipped with an intuitive digital control panel that provides all the control and precision you need to maximise machine performance. The dustproof design of the grinding head and electrical cabinet, along with the precision of the heavy duty components, provides high reliability and increased grinding precision. The chassis can be easily separated from the grinding head and weights dismounted prior to transport.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMG 555 is a triple disc grinder designed for horizontal surface preparation in applications for a wide range of sizes. This is an ideal machine for the removal of coatings, concrete grinding and polishing applications. The BMG 555 uses a 3 in diameter dust hose connection and a floating shroud to manage dust more efficiently, for a safer work environment. A smart easy-to-use control screen gives the operator useful information such as amperage draw, true in line voltage RPM and direction indication.
1 Available Please contact us for delivery and lead timesClick here for the full National Flooring Equipment catalogue
The 6280HD Gladiator walk-behind scraper removes hard and soft goods with ease including; ceramic tile, wood floors, thin-set, sheet vinyl, linoleum, and more. This powerful machine also comes with several options for changing the angle of your tooling to achieve effective removal results.
Secure-mount side slide weights adjust scraper-head pressure; side slide weights add extra head pressure when forward and improved traction when moved over the back wheels
Adjustable, self-cleaning, industrial-grade, siped wheels for improved traction over smooth or slippery surfaces; clip-pin removal allows for easy nonpowered maneuvering
Motor equipped with thermal-overload-protection circuit breaker that protects against strain or electrical overload
Orbital action rotates the cutting blade to cut through a range of materials over various substrates; extends life cycle of machine while reducing maintenance costs
Design incorporates nine isolators for the toughest jobs
Patented isolator overtravel design ensures safety on the toughest jobs
The BMG-780 ULTRAPRO is available in two power options, the 230Volt and the 480 Volt and is the ideal machine to prepare surfaces prior to new coatings, like removal of old coatings or adhesive residues, to smooth or flatten concrete slabs including curled expansion joints, or to just simply remove unsightly surface imperfections. For decorative concrete applications, it is an ideal system for polishing concrete to a high shine or restoring old slabs for newer architectural finishes. The floating shroud with brush skirt is an added feature for those types of processes.
Virtually dust free when connected to BDC-3140LP
3 head planetary design
Variable speed control
Ideal for large jobs such as malls, airports, hotels, schools, hospitals, and food preparation industries
The new and improved GP700 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Forward/rear locking pitch-adjustable axle that allows the operator to change the angle of the head pressure from the front to the back to compensate for inclines/declines on uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 7-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC T6 is the second largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T6 floor grinder easy to operate, with superior ergonomics and advanced safety features.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
A propane drive version of our versatile PG 690 model. The propane drive makes your operation independent of electrical access and makes the PG 690 P the perfect choice for large outdoor concrete slabs. The new electric fuel injection system cuts fuel consumption and reduces the risk of freezing - while the exhaust catalyst makes for even lower emissions.
Rogue is the newest Walk-behind Scraper from National. This all-electric scraper has an infinitely adjustable blade angle and powers through both hard and soft goods removal. Simplified toggle controls, increased travel speed, and fewer loose parts are a few of the features that set this machine apart. Designed as a solution for the global surface prep market, Rogue works in any country with the simple swap of a cord.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMG 780 is a triple head grinder designed for finishing large horizontal surfaces. This machine is equipped as standard with a speed control system. It is an easy to use machine with low vibrations and at the same time has the highest grinding head pressure in the range. BMG 780 is equipped with a smart easy-to-use keypad that gives you all relevant information such as Amps, Volt, rpm, etc. In addition, the adjustable steering handle includes protection for the operating buttons. This is an ideal machine for companies dealing with removal of coating, concrete grinding or polishing applications.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMG 780 is a triple head grinder designed for finishing large horizontal surfaces. This machine is equipped as standard with a speed control system. It is an easy to use machine with low vibrations and at the same time has the highest grinding head pressure in the range. BMG 780 is equipped with a smart easy-to-use keypad that gives you all relevant information such as Amps, Volt, rpm, etc. In addition, the adjustable steering handle includes protection for the operating buttons. This is an ideal machine for companies dealing with removal of coating, concrete grinding or polishing applications.
The 450GP is a walk-behind, single operator machine used to restore unfinished, old or worn hard floor surfaces. Part of the Heavy Restoration process of the Hard Floor Maintenance System, the 450GP is a fast, efficient and affordable propane powered grinding and polishing machine for concrete, terrazzo, marble, stone and quarry tile floor surfaces.
Based on the design and field experiences of the Mongrel – the company’s first successful hard floor grinding machine – the 450GP boasts a more powerful 18-HP Kawasaki engine, heavy duty gear boxes, GPX™ driver technology and improved deck skirting. The 34 inch wide (86 cm) operating path – compared to the Mongrel’s 30 inch (76 cm) width – improves polishing and grinding performance by more than 13%. Removable weights allow the operator to set the machine’s head pressure to the ideal setting for the job, with a maximum pressure of 500 lbs. (227 kg), while the integral skirting allows the 450GP to grind the floor within 3/8” of any wall surface.
Variable engine speeds, vacuum dust port, removable weights and an on-board water supply allows the operator to adjust the performance parameters of the 450GP to meet the requirements of a variety of hard floor surfaces. Also, with the proprietary 3PS system – unique to Amano Pioneer Eclipse – the 450GP boasts 34% lower operational costs when compared to other machines in its class.
The 450GP is one of the most versatile, user-friendly machines on the market. More than just a grinder and polisher, the 450GP is ideal for coating removal, surface preparation (for coating applications), floor stripping and deep scrubbing. Operators can easily switch from one application to the next with simple tool-free driver removal and installation procedures. Operators can easily change between metal, semi-metal and resin diamonds to coating removal, floor stripping or scrubbing pads with little down time.
The GP3000 grinder and polisher is ideal for prepping concrete floors for topical coatings, overlayments, and adhesive while also providing the variety of tooling and power needed to deliver a beautifully polished floor. The 28-inch cleaning path and increased grinding head pressure make this an ideal machine for commercial and industrial projects.
Adjustable shroud incorporates a brush for a 360-degree air intake
Rear spring suspension allows for a more even prep over uneven surfaces
Soft, regular, or hard couplers available for varying floor conditions
New stainless steel, 20-gallon water tank
Control box includes variable-speed soft start, forward and reverse functionality
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC T8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T8 floor grinder easy to operate, with superior ergonomics and advanced safety features.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC T8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with three grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC T8 floor grinder easy to operate, with superior ergonomics and advanced safety features.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC X8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with four grinding discs. The machine features an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC X8 floor grinder easy to operate, with better ergonomics and increased safety.
The SCB-1200-K separates itself from the competition with its removable dumping dust bin and attachment interchangeability making it easy for you switch between shot blasting, scarifying and diamond grinding for all your surface preparation needs.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The 5000DL is a compact, ride-on floor scraper. Featuring the same technology as our patented line of scrapers, this machine is designed with a low-profile frame that increases ease of transport and maneuverability on the job.
Power Supply: Battery 48V
Width: 24.5"
Height: 48"
Length: 63"
Weight: 2,105 lb
Removable Weight: 445 lb
Speed: up to 160 ft/min
Voltage & Frequency: 115V/60Hz
Click here for the full National Flooring Equipment catalogue
The 5625 is a compact, propane-powered ride-on scraper. Available with or without the dual-lift hydraulic slide plate, this feature adds operator controls for adjusting blade pitch and angle while remaining seated on the machine.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Larger/deepened forklift pockets
Nonmarking tires
Compact design fits through standard door frames and elevator doors
Improved exhaust system meets federal OSHA regulations
Front caster wheels allow increased maneuverability in tight spaces
12-volt LED light for increased visibility on the jobsite
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
BMS 220P is a propane-driven and highly productive ride-on floor scraper that is ideal for medium and large sized applications. It is suitable for the removal of hardwood flooring, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles and more. The operator sits on a comfortable seat where he can operate the machine with user friendly levers for controlling forward and backward movements, plus making blade adjustments. BMS 280P gives you independent control of the wheels for precise steering and manoeuvring that maximizes efficiency. Without the need for power cables, you can also enjoy greater mobility on job sites and make more of your time count.
Click here for the full National Flooring Equipment catalogue
Built to operate on almost any jobsite, the 5700 will power through your workday on a single charge. Its built-in 115-volt charging system can plug in to any outlet, and there are no harmful fumes or hazardous by-products. Remove the weights to meet elevator weight restrictions.
5700 is available with or without the Dual Lift. The Dual Lift feature adds operator controls for adjusting blade pitch and angle while remaining seated.
5700HS: Designed to cover more space in less time; specifications made to order.
Special Note: the 5700 can be ordered with lifting arms, to make jobsite maneuvering easier.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head blade holder
Optional dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor
Nonmarking tires
Twelve AGM 180-amp hour batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
Compact design fits through standard door frames and elevators doors
Front caster wheels allow increased maneuverability in tight spaces
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The PG 690 is a versatile and powerful floor grinder but still compact enough to pass through a standard door (total width: 26 in / 67 cm). This is the go-to-choice for most grinding jobs, both industrial and commercial, and for users that prefer a non-motorized drive.
Click here for the full National Flooring Equipment catalogue
The 5200QL is designed for jobs that require continuous operation, and it offers the only slide-out replaceable battery in the industry with a rear-accessed battery pack that is easily installed, changed, and transported. With no belts or gears, this scraper boasts low maintenance costs while maximizing production. Great for commercial surface removal and preparation, it is quiet and compact enough for residential jobs.
This is a special order machine. Please contact us for more information and lead times.
Additional carts, power packs and chargers are available for purchase if you require longer run times.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius
Quick-change swivel head
Extra weight compartments
Larger/deepened forklift pockets
Nonmarking tires
Trailer hitch
Flip-up back lid for quick and easy battery changing
Front debris deflector protects machine from loose material
Front caster wheels allow increased maneuverability in tight spaces
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The Husqvarna BMS-220P ride-on scraper is ideally suited for medium and large sized applications. Works well on all applications such as hardwood parquet, ceramics, linoleum, vinyl, carpet, adhesives, glue, tiles, etc.
The BMS-280P is one of the quickest, most agile and highly productive ride-on floor scrapers designed for large area surface removal. The BMS-280P significantly reduces the amount of time and effort required to remove a wide variety of thick coatings, floor coverings and waterproofing membranes. Everything from carpet and tough ceramic tile to hardwood and VCT are no match for this machine
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC RX8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with four grinding discs. The machine features remote control and an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC RX8 floor grinder easy to operate, with superior ergonomics and advanced safety features.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
HTC RX8 is the largest model of the grinders with Duratiq Technology, which stands for operational reliability, precision, control and power. It is a planetary grinder with four grinding discs. The machine features remote control and an intuitive digital control panel which gives you continuous feedback and thus control over the grinding process. The completely dustproof, hermetically sealed design of the grinding head and the electrical cabinet protects vital components and extends their lifetime. The well-balanced chassis design makes the HTC RX8 floor grinder easy to operate, with superior ergonomics and advanced safety features.
Click here for the full National Flooring Equipment catalogue
Powered by 12 200-amp hour batteries that exceed the industry standard, this machine is everything you need it to be. Bigger, heavier, and faster than the 5700, it is designed to remove difficult material and built to operate on almost any jobsite.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on 7700
Nonmarking tires
AGM (Absorbed Glass Mat) batteries provide 100 percent power, speed, and torque for 90 percent of the batteries’ run cycle
Compact design fits through standard door frames and elevator doors
Heavy-duty 3000 PSI wheel motors
Front caster wheels allow increased maneuverability in tight spaces
Click here for the full National Flooring Equipment catalogue
This heavy-duty, propane floor scraper rivals other manufacturers' heavier machines. The 8000 ride-on scraper offers the speed and power of propane while also combining patented carbide angle-shank technology with the added efficiency of the dual-lift hydraulic slide plate.
Precise hydraulic steering for maneuvering in tight spaces, zero turn radius, and continuous torque for higher removal rates and greater productivity
Quick-change swivel head blade holder
Dual-lift, hydraulic slide plate adjusts blade pitch and angle for continuous contact with the floor; standard on every 8000; this also adds an additional 150+ pounds of down pressure on the cutting head
21-inch nonmarking tires
Compact design fits through standard door frames and elevator doors
Hydraulic brake system automatically engages when the machine is in the off position
Front caster wheels allow increased maneuverability in tight spaces position
Improved exhaust system meets federal OSHA regulations
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
Blastrac BMR 25P is a ride-on shot blasting machine with integrated dust collection system and a 25HP Kohler propane engine. The machine features floating head technology, HEPA filtration and user friendly controls. Optional scarifier attachment makes this machine a real multi-task shot blaster suitable for most surface preparations applications.
The D-1800-FT4 separates itself from the competition with its hydraulic dumping dust bin and attachment interchangeability making it easy for you switch between shot blasting, scarifying and diamond grinding for all your surface preparation needs.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
Blastrac BMR 75D is a powerful ride-on shot blasting machine with integrated dust collection system and a 75 hp diesel engine. The machine features floating head technology, HEPA filtration, user friendly controls and non marking tires. Optional scarifier attachment makes this machine a real multi-task shot blaster suitable for most surface preparations applications. The Blastrac BMR-75 is one of the most efficient and versatile ride-on surface preparation machines on the market.
*Free shipping to commercial addresses with a loading dock. For residential locations please contact us to make arrangements.
The Blastrac BMG 2200RC is a heavy duty, ride-on floor grinding machine that is optimal for large horizontal surfaces and equipped with convenient remote control operation. The machine has two drive wheels fitted at the front and a swivel castor at the back that makes it easy to manoeuvre on and off jobsites. The operator sits in a comfortable seat with arm rests on both sides. Joysticks, push buttons and a touch screen offer effective and ergonomic operation. Each of the three powerful planetary grinding heads can be operated individually and deliver maximum coverage with effective distribution of grinding pressure on every head. Variable grinding speed, control of rotation direction and an independent suspension system are fitted as standard. The variable grinding pressure makes the BMG 2200RC a perfect match for every job. The machine features a powerful, integrated dust collecting system with HEPA 14 filters (which comply with OSHA regulations). This heavy duty system is equipped with an automatic pulse filter cleaning system, a Longopac® bagging system and a pre-separator is provided as standard.